Frigidaire Dishwasher Touch Pad

The Console Assembly is an OEM replacement part for Frigidaire dishwasher models. It houses the control panel interface along the outer door frame, integrating buttons, displays and status lights. This allows for convenient cycle selection and monitoring wash progress.

Causes of a bad console assembly can be damaged buttons that no longer depress properly, cracked displays, or failed electrical connections to control circuits. Moisture exposure over time may also contribute to issues.

Symptoms of a failing console assembly include:

• Inoperable or unresponsive control buttons   
• Inaccurate temperature or time readings on displays
• Fault lights that will not illuminate as intended

This OEM Frigidaire replacement console restores the intuitive control center of the dishwasher. Compatible also with some Kenmore and Amana models, reliable controls are important for starting cycles and verifying clean dishes. 

The Console Assembly is an OEM part for Frigidaire dishwashers. It includes the control panel and its housing, allowing users to select and monitor different wash cycles and settings. This assembly is integral to the operation of the dishwasher, providing both functionality and a user-friendly interface.

Replace the console assembly if it becomes damaged or malfunctioning due to wear and tear, exposure to moisture, or electrical issues. 

Symptoms of a bad console assembly include:

• Unresponsive or erratic buttons
• The display not lighting up or showing incorrect information
• Difficulty in selecting or changing wash cycles
• Cracks, discoloration, or other physical damage to the panel

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Console Assembly is an OEM part for Frigidaire dishwashers. It houses the electronic controls, buttons, and touch screen panel which allow users to easily monitor dishwasher cycles and settings. The console assembly is crucial for selecting cleaning options, checking cycle status, and making any adjustments during a wash.

Causes of failure could be due to physical damage, spilled liquids causing corrosion of internal components, or just normal wear over extended use.

Symptoms of a bad console assembly include:

• No power to control functions or display
• Faulty or non-functional buttons that do not press
• Inability to start or stop dishwasher cycles
• Touch screen no longer detects input selection
• Error codes appearing without cycle initiation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Control Panel is an OEM part for Frigidaire dishwashers. Located at the front of the dishwasher door, the control panel features buttons and displays that allow for the selection and monitoring of wash cycles. Printed electronic circuits distribute input signals to initiate the appropriate cycle settings.

Causes of a bad Control Panel can include cracked or damaged screens, non-responsive buttons, or failures of internal electronic pathways over time. 

Symptoms of a bad Control Panel include:

• Faulty or unreadable display screens  
• Random cycle activation without input
• Repeated error codes or flashing lights
• Physical damage or loose components  

This genuine OEM Frigidaire part is compatible with some Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models as well.

This replacement insert restores the finished trim and proper fit where the original trim or panel insert is cracked, missing, or worn. It helps return a clean, secure appearance and supports adjacent panels. What it does:

• Replaces a damaged or missing trim/insert piece to restore appearance and fit
• Helps eliminate visible gaps and prevents adjacent panels from shifting
• Reduces rattling from loose trim pieces during operation
• Preserves the original mounting alignment for nearby components

• Disconnect power to the appliance before starting any work
• Remove any surrounding trim or panels carefully to access the insert; keep fasteners for reuse
• Install by aligning with existing mounting tabs/slots and secure with original hardware; do not force into place

This 10-button switch assembly replaces the worn or unresponsive front control buttons on compatible Frigidaire appliance control panels, restoring reliable push-button input and normal user control of cycle and function selections. What it does:

• Replaces cracked, stuck, or non-responsive push buttons on the appliance control console
• Restores tactile button feedback and reliable electronic input to the control board
• Helps regain access to oven/range or console functions that won't register when buttons fail
• Fits into the front user interface assembly to provide a like-for-like button layout

• Always disconnect power to the appliance before beginning repair to avoid shock or damage
• Installation typically requires removing the control panel or console; handle the assembly and ribbon connector with care
• Inspect connectors and mating surfaces for damage or debris before installation

This interior trim insert restores a finished look and helps secure adjacent components in your appliance. It replaces a damaged, cracked, or missing insert so panels fit properly and appearance is restored. What it does:

• Covers or fills a small opening in the appliance cabinet or interior trim
• Holds or aligns surrounding panels to reduce rattling and movement
• Restores a clean, finished appearance after wear or breakage
• Common symptom: visible gap, loose trim, or a broken plastic piece where panels meet

• High-level, do-it-yourself friendly: usually accessed from the interior or by removing adjacent trim panels
• Use appropriate hand tools; avoid force that could crack surrounding trim
• Disconnect power if working near electrical components or lights

A replacement switch assembly that restores user control of the affected function by completing the electrical circuit when operated. Fits Frigidaire appliances and provides a direct replacement to return controls to normal operation. What it does

• Acts as the user-operated electrical switch that turns a specific function on or off.
• Replaces a failed or intermittent switch that causes the appliance function to not start or stop.
• Helps correct symptoms such as unresponsive buttons, intermittent operation, or no power to the controlled circuit.
• Works as a direct component-level replacement—no control board required when the switch itself is the issue.

• One switch assembly as shown.

• Disconnect power (unplug appliance or shut off circuit breaker) before beginning any work.
• Access may require removing a control panel or trim; keep fasteners organized for reassembly.
• Handle the new switch carefully to avoid bending terminals; verify secure connections before restoring power.

This switch assembly replaces a faulty console control switch to restore reliable control of the appliance's functions. It provides the user interface contact and switch mechanism that lets the console register selections and changes. What it does:

• Routes electrical signals from the console to the appliance control circuits so selected functions activate.
• Commonly fails when buttons or settings do not respond or when functions intermittently cut out.
• Helps stop unresponsive controls, stuck settings, or erratic operation caused by worn switch contacts.
• Matches OEM design to maintain original fit and interaction with the console.

• One switch assembly as shown.

• Disconnect power at the breaker or unplug the appliance before beginning any repair.
• Access may require removing the console or control panel.
• Handle the assembly and circuit board contacts carefully to avoid damage from static or rough handling.