Jesse Wadkins December 04, 2020 for Model Number FFEF3016USB The front left large burner does not stay the same temperature. If you a boiling water it boils and then stops boiling, then goes back to boiling sometimes. Works fine some times.
1 Answer Jesse, Thanks for the question!!! I am thinking you might need a new burner element part number 5304516159. Since it is in and out it could also be a poor connection at the harness block 5304516152. Remove that burner and check out those connections. Read More...
Tina November 20, 2020 for Model Number FFEF3048LSM When we turn on the front right element, the kitchen lights start to flicker. Only happens when we use that eye. Is that a runaway switch or the wiring is going bad or the element is going out/shorting?
1 Answer Tina, For this issue, the most likely cause for this will be a faulty infinite switch. Read More...
David P. July 19, 2020 for Model Number FEF336ECE I can’t seem to control the heat element, no matter the position of the knob. What should I do? Can I fix it with this part work?
1 Answer David, With not being able to adjust the temperature of the element and it just staying on high then yes the infinite switch would be the cause. Read More...
Susan April 22, 2020 for Model Number fef364fsc My right front burner does not come on at all. I saw part of the burner flashing last time I used it. Would I need the whole element or switch only? And what part number? thank you
1 Answer Susan, the switch 316436000 and element 316135401 can be tested to identify which part has failed. With the back panel of the console removed, the switch can be tested for voltage by turning the switch on, placing one meter probe at the terminal H1 and the other probe at the terminal H2. If there is 240VAC, the switch is good and the likely failure is the element. Read More...
Hal March 02, 2020 for Model Number FEFL79DQH Frigidaire front left dual burner infinite switch, 6"-9." Do you folks have it?
Tammy February 24, 2020 for Model Number FFEH3054USB I need the left front element switch. Can you tell me what part# that one is?
Shirley Slade February 23, 2020 for Model Number FEFL78CSC The marking son the large element switch are different. How do I cross reference.
1 Answer Hello Shirley, the model number supplied uses part number 316436000 for the small elements and the dual element uses switch part number 316238201. If you purchased a large surface switch, it will not be compatible with your model number. Read More...
Bjd January 27, 2020 for Model Number MODEL_PBK0190 Oven works. Clock works. None of the stove elements will turn on. What part would I need?
1 Answer BJD, unfortunately, the model number provided is not showing as a valid model number. If the model and serial number could be verified and posted in a new inquiry, this will allow for the most accurate information to be presented. Read More...
Michael January 05, 2020 for Model Number FEC30C4ASD When you set the burner knob on high to get hot and then when you turn the know back down to medium or low it still acts like it’s on high. It does it sometimes. Just wondering what may cause this problem.
1 Answer Hello Michael,the burner infinite switch is failing, for the large burners, the switch is 318293827, for the small burners the switch is 318293818. Read More...
C R November 08, 2019 for Model Number J BS03 V5WH Large burner goes from low (normal) to very very hot all on its own. Do we need a new large surface element switch? If so, which one. Our model is not on the list provided.
1 Answer C R, the wires will need to be checked for any bare spots or connections to ground (by testing for continuity to the chassis). If the wiring checks good, then the switch WB21X36771 would be failing by not cycling the element properly based on the information provided. Read More...