Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Washer Drain Pump by Ge

Best Seller
Manufacturer Part
4.89 (64)
By: Ge
Part Number: OEM17410392
Manufacturer Part Number: WH23X10030

Washer won't drain or leaves clothes soaking wet? This drain pump removes water from the tub after each cycle. Typical DIY repair takes 20-30 minutes.

More
$56.68

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Questions & Answers

For Ge Washer Drain Pump (Part Number: OEM17410392)

1 Answer

Hello Pa Houa,

You will want to check to make sure that there is nothing clogging the pump or the drain lines. The unit will not spin out properly if the unit is not draining water. If nothing is clogged and pump is not evacuating water then you would need a new pump assembly WH23X10030.

Read More...

1 Answer

Hello Bobby,

This can be a ball of lint at the opening in the outer tub where the pressure switch hose connects to the outer tub or a bad pressure switch or water valve failing. If you unplug the machine and open the control panel, you can remove the hose from the pressure switch and blow through it. This will blow the lint back into the tub from the small opening at the end of the pressure switch hose. If this doesn't work, the water valve can be eliminated as the problem by letting the unit fill with water in the part of the cycle where it overfills and unplug the unit. If the water stops, it cannot be the fault of the water valve 285805. The pressure switch W10820051 is now in question.

Read More...

1 Answer

Hello Chris,

Based on the information provided it sounds like the timer WH12X10254 may have contacts sticking and would need to be replaced.

Read More...
Chuck for Model Number GE S3200Y1WW

Washer fills properly on both the wash and rinse cycles. However, on both cycles the water slowly drains and the tub needs to be refilled by using the water level reset. If the machine is turned off (eliminating the operating sound) when water is in the tub, you can hear the water trickling out through the discharge hose. Obviously the drain valve is leaking. What part(s) need to be replaced? Are there any surprises I can expect to run into when changing this part? Thank you for your help; it is greatly appreciated.

1 Answer

Hello Chuck. You need to check and see if the drain hose is to far into the drain stand pipe. If so, it will cause the issue you are having with the unit.

Read More...

1 Answer

Hi Timothy, You could turn off the water and check your hoses[TJ725RBFFP] and fill valve WH13X10024 for any restrictions. If not, I would try replacing the fill valve. Hope this helps!

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google