Hoky March 22, 2021 for Model Number GE CGS980SEM3SS I replaced the spark module on my GE CGS980SEM3SS stove with the new replacement part WB13X26360 but one of the burners does not spark. I switched the wires and could change which burner would not spark, so it is not an issue with the burner. Is the spark module defective ? Also there does not seem to be a lead where the ground is indicated next to the input leads. The part comes with a grounding cable, but there is no where to attach it. It doesn't go in #6 does it ? I believe that is an output.
1 Answer Hello Hoky, yes, the green ground wire is connected to output terminal #6 and the other end to chassis ground. Read More...
Stacey July 26, 2018 for Model Number CGS980SEM3SS When I try to turn on the oval (center) burner, I can smell gas but it does not spark. Instead of the oval burner electrode clicking, the electrode on the dual head extra large burner clicks and sparks. I checked the small hole on the oval burner head and it is clear of debris. Is this an oval burner electrode clip or top burner igniter problem, a spark module problem or something else?
1 Answer Stacey, based on the description of the problem, you may have a park module that is not working properly. Read More...
Stephen July 14, 2018 for Model Number JEB908BEK5BB I purchased a spark module WB13K10019 and recieved module WB13X26360. Reading the instruction sheet this is the new replacement part. The parts are configured completedly different, and the instuction page is very vague. Listing only input and output cables is troubling to me, since there are 5 burner to ignite and there are no port numbers on the oem part like the new one has. I tried your web page for instruction and I find the video ot replace the OEM WB13K10019 I need. Not the WB13K10019 to WB13X26360 conversion. Do you have a better detailed instruction sheet for this and possibily in larger print font. Increasing the screen font size on you site distorts the photo so bad that you can't make out the photo. Or do you have the OEM part WB13K10019 I can purchase? Thanks I
1 Answer Stephen, Unfortunately we do not have any other instruction sheet from what you have but starting next to the input the right front will go to the first terminal, right next to it would be the right rear, then the center across from it and then the left front and rear on the last other 2 that are across from it with the ground wire going to the farthest terminal from the input. Read More...
Joseph Stasion October 15, 2017 for Model Number jgb810set1ss the electrode on my g.e.gas range on the front right burner will not ignite. you can hear a sparking sound ,but no spark. the other burners do work. what part do i need to fix this.?
1 Answer Joseph, If you haven't yet, check and make sure the igniter, burner base and burner cap and area is clean and free of any spillage or corrosion, Look closely at the igniter and check it for any cracks nicks or chips in the porcelain insulator. Then raise the cooktop and check the ignition wire to make sure it's not damaged, frayed or pinched to the metal frame. If all's OK, then replace the spark module. Read More...
Jeff April 28, 2017 for Model Number C2S980SEM1SS All burners stop lighting. No clicking/sparking. web troubleshooting said replace spark module with kit WB13X2630 which I have. A Q&A on this web page said problem was more likely a spark switch harness. Do I send this kit back and get a harness?
1 Answer Jeff, If you replaced the spark module already then the issue will most likely be the spark switch harness and you will want to replace the harness. Read More...
Myron Frommer April 07, 2017 for Model Number GE Gas Range PGB930SE1JSS Which lead on the Spark Module:of GE Gas Range PGB930SE1JSS Part Number: AP5999449 MFG Part Number: WB13X26360 Made by: GE will disable the sparking for the surface burners without affecting other features. If not on the spark module, where will I fund it? On a 17 year old GE Profile Convection Range JGB910 CEC2CC it was the purple lead.
1 Answer Myron, You can disconnect the violet wire from the spark module to keep it from clicking. Read More...
Bert October 11, 2016 for Model Number GE Cafe stove (stainless, not sure of model no.) Hi, My stove does not ignite although I can hear clicking sound and see a spark on the igniter. I checked on the small hole above the igniter that allows the gas to pass thru, and it's not clogged. I even bought a new igniter on one of the burners and still didn't help, the spark seems like not enough to cause an ignition. There is also no problem with the gas supply. Right now, we are manually lighting the burner every time we use it. Thanks.
1 Answer Hello Bert. Remove all burner parts and clean them very well. This is usually a sign of a dirty burner. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Robert February 20, 2016 for Model Number CGS990SET4SS I have a GE Café Double Oven Range, CGS990SET4SS. The burners all work as does the lower oven. The top oven doesn't work. No broiler function or oven burner function. Since both features in the top oven aren't working, I'm suspecting whatever controls the top oven to be the problem rather than both ignitors. Can you help me with what that part is?
1 Answer Robert, If you check at the oven safety valve WB21K10160 for the upper oven and test for 3.2 to 3.6 vac when the oven is turned on. If there is no voltage then check to see if the igniters are glowing. If they are but not proper voltage then the igniters would be the issue. If they are not glowing then test for 120 vac to the igniter. If there is 120 vac then the igniters are bad and if there is not 120 vac then the control board on the unit is defective and would need to be replaced. Read More...
Charles W February 14, 2016 for Model Number PGB918SEM2SS AP599499 that comes up via cross reference for my appliance to replace the Spark Module does not seem to make sense. No images provided for this item. Diagram provided does appear to be my appliance. However, Spark Module kit has no explanation. The item I found that shows images exactly matching my application is AP4098822, but is listed for whirlpool appliance. Are there images for the AP599499?
1 Answer Charles, Unfortunately we do not have a image for this part but the part is a spark module 6+0 and just means that it can be used for up to 6 burners. Since yours is only 5 burner this will work for your unit. Read More...
Rubin T. June 16, 2015 for Model Number AP4484165 This is followup question regarding the need of a spark module replacement. I cannot activate the ignitor in the stove burners; no clicking noise comes out and no sparks in all burners can be detected. Is this likely a spark module problem? Do you have instructions on how to replace the module in my model: CG908SEM6S (cafe gas stove) in the part is ordered? Thanks
1 Answer Hello Rubin, If no sparking or clicking sounds are detected, the issue is more likely to be the start switch harness which activates the spark module. The model number you provided is not coming up as a valid model number so we need you to please verify and post the model number from the units' I.D. tag so we can look up the correct replacement parts for your unit. Thank you for your patience and understanding in this matter. Read More...