Jason November 20, 2015 for Model Number wm2487hrma Can other model hinges work on wm2487hrma. If so what model number will work. Thank you
1 Answer Jason, According to your model number, the hinge assembly for your unit will be part number AEH73976801. Read More...
George August 17, 2014 for Model Number LG WM2016CW Where do I find the door hinge pin holders. They are plastic and bolt to door. Easily breaks. Thanks.
1 Answer Hello George! Unfortunately, the pins are not available separate from the hinge itself, part number 4775ER2002A. The pin holders are not available separate from the door assembly part number 3581ER1008Z. Thanks. Read More...
Jim May 12, 2014 for Model Number WM2050CW Does Hinge Assembly AP4437234 fit the Wm2050CW LG washer if not which one does?
1 Answer Hello Jim! Yes, the hinge assembly 4775ER2002A is the correct replacement and will work on your LG model WM2050CW. Thanks! Read More...
Rich February 26, 2014 for Model Number wm2277hw If the hinge is bent and door dosnt close right and it leaks from bottom of door. Will I have to change the gasket to?
1 Answer Hello Rich. No, if the gasket is good, you will just need to replace the hinge on the unit. Read More...
Mike December 07, 2013 for Model Number Wm2077cw Replacing hinge with 4775er2002a but the door won't close on the hinge side not sure if there is something missing or what I can push it in and the washer starts let go and the door pops out. Thanks mike
1 Answer Hello Mike. You need to check and make sure it is installed into the door properly. If the pins on the hinge are not in the holders, the door will not close properly. Read More...
Dwayne May 23, 2013 for Model Number WM2496HSM LG Tromm I have an LG washing machine (Model #WM2496HSM) and we are having a problem with the door not wanting to open all the way. When you go to close the door, about 3 inches before it latches, it seems to bind up. When opening, it almost pops open and now it is leaking a little during the cyle.
1 Answer Dwayne, Based on the information it sounds like the hinge 4775ER2002A on the unit is defective and would need to be replaced. Read More...
Derek March 29, 2013 for Model Number wm2016 My door/hinge will not open completely, only 90 degrees when new it would open 180 degrees. any idea what might cause the stiffness/being stuck.
1 Answer Hello Derek, It sounds like something in the hinge is binding causing it to not fully extend. You would want to replace the hinge assembly 4775ER2002A. Read More...
Jaime April 23, 2012 for Model Number wm2277hw I need the 'hinge pin bushings' that go with part #AP4437239. Do you sell this separately or does it come with the hinge assembly?
1 Answer Jaime, the hinge pin bushings are only available with the hinge 4775ER2002A. Thanks! Read More...
John February 28, 2012 for Model Number wm2277hw AP4437239 is described as a dryer hinge and yet it is listed as the replacement part for my wm2277hw wash machine. It looks identical to the hinge on my washer and not at all like the hinge on my dryer. Is this the correct part for my washer?
1 Answer John, I do apologize for the confusion. The hinge assembly 4775ER2002A is a washer hinge used on your model WM2277HW. I have sent a request to have our description updated. Thank you! Read More...
Jen January 23, 2012 for Model Number 4775EW2002A When you replace the hinge with part #ap37239 and your removing old hinge there are door hinge bushing that you must remove first before you can remove the door or hinge. My question is what part # is the hinge pin bushing screws?
1 Answer Hi Jen.The hinge assembly 4775ER2002A does not come with screws. The manufacturer is not supplying a part number or any screw information on the diagrams. You will have to purchase the screws locally. Thanks. Read More...