Blake February 10, 2024 for Model Number LFXS24623S/00 My fridge is working fine but the freezer isn't freezing anymore
1 Answer Blake, Check the evaporator frost pattern. If frozen up completely, you have a defrost issue. If partially frozen up, or not frozen up at all, then you will have a sealed system issue. Read More...
Amrit December 21, 2023 for Model Number LFCS22520S My fridge is not cooling and has three blinking lights on the inverter board
1 Answer Amrit, This will most likely be a faulty inverter which will need to be replaced. Read More...
Monica April 08, 2023 for Model Number LDCS24223S/01 The lights inside my refrigerator are off and there is no sound to the fan running. What can be wrong with it?
Jane January 19, 2023 for Model Number LFXS24663S/01 Hi, My mom's refrigerator stopped cooling and freezing. My brother thinks it's the compressor but looking at your site it looks like other customers fixed their cooling issue by replacing the Overload Compressor or Compressor Overload Protector Assembly. For LFXS24663S/01 what part should we use? Thanks
1 Answer Jane, the unit can be placed into a test mode by accessing the main control EBR81182782 in the back and pressing a black button once. This button is located near the center of the control and will force activate the compressor if the control can. If the compressor does turn on, the overload and compressor should be good and the thermistors would need to be tested. However, if the compressor does not come on, the overload protector 6750CL0001D can be tested for continuity after unplugging the power cord, and it should have continuity at room temperature. If it does not, it would need to be replaced. Read More...
Karen Wachal January 15, 2022 for Model Number 79572063317 Can you help me get the right compressor overload protector for my parent's refrigerator? I need to know the correct number so I can order, please.
Matt October 25, 2021 for Model Number lg lfxs27466s Last night I noticed water on the top of the freezer drawer door and realized that the ice in the door was melting, I checked the temperature inside and the fridge was about 54, and the freezer was about 39. I pulled the back off and the coils and fan were really dusty, cleaned it all off and ran the push button test and everything worked OK. I plugged it back in and put a thermometer in the freezer and it went from about 59 to 27.9 in around 3 1/2 hours. But then the temperature jumped to around 50. I let it run overnight and the temperature slowly dropped but bottomed out around 39.9. I’ve taken the freezer back panel off and the coils are not frosted but they were wet. All the fans are working OK. I’m hoping it’s the overload compressor or the PCB. I tested the overload compressor and it has continuity and it reads .7 ohms. Any ideas? Thanks!!
1 Answer Matt, If the compressor is not running then this would most likely be a faulty relay on the compressor but if the temperature is getting down to 39 degrees in the freezer then this sounds more likely that you have a sealed system issue and will need to have service. Read More...
John October 22, 2021 for Model Number LFC24770ST/00 My fridge will cool and freeze, but then shuts down and won't cool or freezer gets warm. Unplug for a few minutes and will work. Repeat cycle and shuts down. What is wrong? only 3 and half years old.
1 Answer Hello John, You will need to replace the control board CSP30020818 since it is the component that commonly causes this issue. Read More...
D H February 20, 2021 for Model Number LFXS24623S/00 Hi, Guys. Will this get me up and running for a - lfxs24623s ? Thanks! D
1 Answer Hello DH, this part is a high-temperature thermostat, it should show continuity at room temp using a multimeter. It only protects the compressor in case of high operating temps. The compressor in your model is a variable speed type controlled/powered by the main control board. If the compressor is not running, this would require a service technician to check further and likely it is a sealed system problem or a failed compressor. Read More...
Leland January 19, 2021 for Model Number lfxc24726s Ran thru test on the PCB board after no cooling problem in the fridge & freezer area, code 22? Showed on front panel & no diagnostic blinking lights on PCB board, does this model have overload protector as compressor does not seem to come on although all fans seem to be running for a bout 5 min & then compressor fan shuts off not to come back on till power is cut & then reapplied.
1 Answer Leland, The 22 code is just stating that it is in test mode 2 by you pushing the button on the control board. This unit does have an overload protector which is part number 6750CL0001D but would not have anything to do with the condenser fan motor running. If it is bad it will cause the compressor to not run. If the compressor is not running you will want to check to make sure that there is 120 vac going to the compressor and if there is not then the main control board will be the issue and if there is then the thermistor assembly EBG60663230. Read More...
Jason November 29, 2020 for Model Number Kenmore Elite 79572053111 Both compartments are 65 degrees, I ran the diag and the fans are coming on in both compartments. The compressor and fan are coming on but the coils in front of the fan are room temp. Please help.
1 Answer Jason, it would be recommended that the condenser coils in the compressor section are inspected for dust build-up. If there is excess dust, it would need to be cleaned. If there is not, and there is not a frost pattern on either of the evaporators, then there is a sealed system issue that would require a freon certified technician to properly diagnose and repair. Read More...