Ray January 03, 2012 for Model Number lg wm0532hw Can I get to the rotor assembly from the rear of unit or will I have to take drum and all other parts from front. I have ce error but have had problems draining or out of ballance issues. Thanks Ray
1 Answer Hello Ray. You can remove the stator assembly 4417FA1994G from the back of the unit. Hope this helps. Read More...
Mike December 26, 2011 for Model Number WM0532HW I recently had a problem with the LE error code...MOTOR OVERLOAD OR Stator Control problem...I REPLACED THE HALL SENSOR...still fills with water...hums a littlle...will not spin...Do you still recommend replacing the Stator Assembly...is that the next step or is there a possible control board issue? Could you ask atec and respond.....? Mike
1 Answer Hello Mike. Check and make sure the wiring harness and the magnets in the rotor are not cracked. Either one will cause the LE code. If both are good, then you will need to replace the stator 4417FA1994G. Hope this helps. Read More...
Diane M. November 22, 2011 for Model Number wm2277hw I have replaced the pcb main assembley and the pcb assembley on my washer model #wm2277hw. It first showed a code of CE now it shows a code of LE what do I need to do now?
1 Answer Hello Diane. The LE error code is for a bad water valve 5221ER1003A and 5220FR2006H. Check and make sure the water pressure to the unit is good, and the machine is not siphoning out the water through the drain pipe. If not, you will need to replace the valves. Hope this helps. Read More...
Tj September 22, 2011 for Model Number wm1832cw Hi, my washer trys to turn but dosn't move and then back the other way. It makes a humming sound and code LE pops on?
1 Answer Hi Tj. The stator windings have to ohm out between 8-15 ohms. Is the Hall sensor placed correctly? Part # is 6501KW2002B. Can the basket spin freely? Are the stator magnets in place? Double check the motor to main control board wires for clean/tight connections. The main board monitors the speed /torque values and send commands. If all of this is Ok, Then replace the Control Board part # is 6871ER1023B. Thank you. Read More...
Steven August 16, 2011 for Model Number LG WM2277HW During washing cycle drum only turn 1/4 cycle and repeat it wouldn't spin and LE sign appears and stops and do not spin and when it does it makes sounds when spinining unusually and has rubber burning smell. It seems to drain water out okay. I opened back and only thing I can think of is changing stator but not sure this is what I need to do?
1 Answer Hello Steven. Based on the information you provided, it sounds like the stator assembly 4417FA1994G should fix the problem. Hope this helps. Read More...
Hedy July 26, 2011 I did remove the back cover and I do not see any belts anywhere. I do see a lot of little silver shavings/dust on the bottom of the washer. There isn't any clothing, etc. stuck anywhere. the drum spins freely by hand. It just won't spin with the motor. I turned it on with the back off and my hands out of the way, and something is definitely slipping. Any other thoughts on this. Sears is coming on Saturday, and I would love to cancel the appointment.
1 Answer Hi Hedy. I don't understand what you mean by slipping? Are your shavings under the bottom at the very back of the unit? How old is your unit? Does it sound like a train in high speed spin? If so then the rear outer tub bearing and spinner support assembly are worn out. Can you freely turn the large outer stator assembly? It is outside of the rear tub and is approx. 12 - 16" in diameter and turns with the inner tub. When you turn this, does it drag anywhere in the full 360 degree turn? Inside the stator it is lined with 1"x2" magnets aligned on the circumference of the inner sides. I have seen a physical crack in the magnet, but it would normally follow a failure code. It sounds more like you have a rear bearing issue. Can you follow where the metal shavings come from? Please let us know if we can help further. What is your model # again? Thank you. Read More...
Hedy July 26, 2011 for Model Number WM0642H Drum seems to slip when trying to spin? Everything else works fine. Since it is a direct drive, what could be the problem?
1 Answer Hi Hedy. You will need to take the back cover off. There is a large pulley with your belt connected to the motor also. Is the spinner bolt in the center loose? If so then use loctite on the bolt threads to torque it down tight. This bolt part # is 4040FR4051C. Is there any clothing articles stuck in the front boot area stopping the spinning? With all the clothes out, you can freely spin the unit. Thank you. Read More...
1 Answer Hello Jimbo. This is a new stator assembly. Our parts are always new parts, unless it is specified in the description as a refurbished part. Thanks. Read More...
Guest February 26, 2011 LG WM2032HW washer. During wash cycle drum stops turning and machine makes whining sound and then gives error code LE.
1 Answer LE code is a motor sensor error. Most of these are solved with a new sensor. The stator assembly comes with a new sensor. When installing this part, check and make sure none of the magnets are not craked on the rotor. If they are, replace the rotor. Read More...