Alex October 20, 2017 for Model Number RF28HFEDBWW/AA Our 2-year old icemaker will not dump ice normally but will do so when the reset button is pushed. We do NOT have frost build-up like many apparently do. Is this an icemaker issue, a PCB issue or a sensor issue? Any way to tell without having to start replacing parts until we stumble on the one that is defective? Any diagnostic that can be performed, and if so what and how? If not, what part replacement order would you recommend? As an aside, for this model, what do the suffix numbers (0000, 0001, 0002, etc.) mean, how does one figure out which version their refrigerator is, and is there any difference in parts choice? Thanks!
1 Answer Hello Alex. You will need to order and replace the icemaker based on the information you provided. Make sure the unit is 0-5° and the icemaker is turned on. Thank you. Read More...
Mike September 10, 2017 for Model Number RF263TEAEWW/AA Trying to find the part number for the LOWER ICEMAKER unit
Sharon August 05, 2017 for Model Number RF263BEAESR/AA-0000 Our ice maker works only when I press the reset button and push the tray back in. Sometimes the tray doesn't fit good so I have to try and figure it out. It only makes about two ice cubes and then it won't make anymore.
1 Answer Sharon, With having to push the reset for the icemaker to cycle then this issue will be a faulty icemaker which would need replaced. Read More...
Richard April 12, 2017 for Model Number RF28HFDBSRA/AA I see two questions asked on the site: Ice maker DA97-15217A ice maker will produce ice only when reset is pressed, one cycle. How do I know if the the problem is the valve, board or the ice maker? DA97-15217A icemaker I installed a replacement icemaker, but it still only makes ice when i push the button on the side. Goes thru full cycle including added water but then nothing until I push the button again. Aren't the above two questions the same and have two diff answers?
1 Answer Richard, Yes they would be the same and may have 2 different answers based on the symptoms of what may be occurring and what has already been done. If the icemaker has been replaced but still have to push the reset button for it to cycle then it will normally be a control board issue. If the icemaker has not been replaced then it could be either the board or the icemaker that is causing the issue. Read More...
Dan March 10, 2017 for Model Number Samsung RF32Fmedbsr/AA fridge freezer Ice maker DA97-15217A ice maker will produce ice only when reset is pressed, one cycle. How do I know if the the problem is the valve, board or the ice maker? Thanks, Dan
1 Answer Hello Dan. If the temp is 0 to 5° and the icemaker will cycle by pressing the button but will not without, then the icemaker is at fault. If the board was bad, the icemaker would not cycle pressing the button. Read More...
Phil B February 25, 2017 for Model Number Samsung rf28hfedbsr /aa DA97-15217A icemaker i installed a replacement icemaker, but it still only makes ice when i push the button on the side. Goes thru full cycle including added water but then nothing until i push the button again.
1 Answer Phil, This issue would most likely be caused by a main control board that is not reading the thermistor that is on the icemaker. Read More...
Mark February 09, 2017 for Model Number Rf263beaesr/aa Ice maker is not getting water. Water works on door. Can i buy just the valve? Or is there a common problem with this model not making ice.
1 Answer Mark, The water valve for this unit will be part of the filter housing assembly which will be part number DA82-02863A. Read More...
Gerald Delaney December 05, 2016 for Model Number RF323TEDBSRAA Error code 14 a ice maker sensor. This unit has an upper and lower ice maker was told by an online tech that i needed to order PN# DA59-00294B which I ordered from your company. It does not fit the ice maker and it looks like it doesn't even fit the machine. So then what is the 14 A code and what do I need to order.
1 Answer Gerald, The part that they gave you would be the icemaker head with the sensor. This is showing to be the correct part number for the freezer icemaker. The other option would be to get the complete icemaker which is part number DA97-07603B. Read More...
Dan November 28, 2016 for Model Number Da97-12317a My ice maker will not stop making ice when the chute / container assembly is full. If I manually turn off the ice maker, all is well. If I leave it on, It overfills the chute/container unit and makes an ice dam at the top because there is no more room. How does this unit sense ice is full? I see no sense lever or device. Where is it? My refrigerator model is rf323tedbsr/aa Thank you for any help!
1 Answer Hello Dan. The icemaker has a sensor on it and the icemaker will need to be replaced on the unit to resolve the issue. Read More...
Jeff October 05, 2016 for Model Number RF28HMEDBBC/AA-0000 Ice is coming out slushy; Water continuously drips from ice maker. a little over a year old. I have put to -1, plan to try at 1 after reading comments. Do I need to replace ice maker?
1 Answer Jeff, With water dripping from ice tray then this would be either the tray is cracked, the water valve is not shutting off fully or the icemaker is faulty. Per the manufacturer the recommended set temp is -2 degrees. Read More...