1 Answer Hello Joe, This DC97-14486A is the heater in the heater housing with the high limit thermostat and the thermal cut-out as an assembly. Read More...
Ryan October 30, 2018 for Model Number DV56H9100EG/AC Can I use the DC97-14486A place of the DC97-14486E
1 Answer Ryan, The outer casing is different. Always use the appropriate part for your specific model to ensure proper fit and function. Read More...
Matthew August 22, 2018 for Model Number DV48J770EP Will the 2 prong heating element DC47-00019A work with my dryer? I took mine apart to see the element and have a 3 prongs going into the heating element housing.
1 Answer Matthew, you will need part number DC97-14486E for the heating element assembly. Read More...
David August 12, 2018 for Model Number DV448AE/XAA I ordered and installed dryer heating element DC97-14486A. Dryer air is warm but not nearly hot enough. Checked continuity on element and both attached sensors. What else could the problem be?
1 Answer David, check the voltage at the terminal block to make sure you are getting 240 volts to the dryer. Check the wire coming out of the main control going to the heating element, it sounds like you are not getting proper voltage to the element. Read More...
Kandi July 27, 2018 for Model Number DV456ETHDSU/AA Which heating element do I need to get for my model number?
1 Answer Hello Kandi, we show that your unit uses heating element part number DC47-00019A; that can also be purchased as an assembly under part number DC97-14486A. The assembly includes a new heater housing as well as a new high limit thermostat and thermal fuse. Thanks! Read More...
Michelle July 24, 2018 for Model Number DV350AEW/XAA dryer works but no heat. assuming its the element or the fuse? Not sure if I need the element or the assembly and whether I have a two or three wire dryer?
1 Answer Michelle, make sure you are getting 240 volts to the dryer, if not , the dryer may not run or heat depending on what line voltage is missing. Unplug dryer and then check your thermal fuses and heating element for continuity to determine which part is defective. Read More...
Vince July 22, 2018 for Model Number DZ220AEW/XAA What is the difference between the heating element assembly and the dryer element? How can I tell which needs to be replaced?
1 Answer Vince, These 2 parts will be the same thing and the only difference would be one comes with the housing as to where the other is just the element. Read More...
Adam July 21, 2018 for Model Number DV405ETPASU/AA How do I tell if I need the 2 wire or 3 wire heating assembly? Samsung dryer: DV405ETPASU/AA. (I do not see the 0000 or 0001 at the end of the model number.)
1 Answer Adam, According to the manufacturer the correct heating element for your unit will be DC97-14486A. Read More...
John July 21, 2018 for Model Number dv457evgsgr/aa I am looking for a three wire heating element for Samsung dryer dv457evgsgr/aa. I can only seem to locate the two wire on your site. What is the part # for the three wire element?
1 Answer Hello John, I'm sorry but the model number you provided only lists the two element, three terminal heating element DC93-00154A. Thank you for your patience and understanding in this matter. Read More...
Lorelei June 18, 2018 Hi I have a dryer model # DV42H5000EW/A3 01 Do I need the 2 or 3 wire heating element
1 Answer Lorelei, Your unit will use a 2 wire heater and the assembly will be part number DC97-14486A. Read More...