Jessie May 06, 2013 for Model Number rb215lash I have push the reset button on our ice maker and although the water line is running and will make ice in the cube tray, the tray will not dump into the large container that holds all the cubes, what do I do now?
1 Answer Hello Jessie. If the unit does not cycle, you will need to order and replace the icemaker on the unit. Read More...
Jana I April 29, 2013 for Model Number Whirlpool gold side by side ice maker in door The plastic tubing to the ice maker has a hole in it. Do you sell replacement hose? Model # GI7FVCXWY00 S/N KY2644959 The hose is on the top of the refrigerator.
1 Answer Jana, The fill tube for this unit is part number WPW10213219. This is the tube that runs from the water valve to the icemaker. Read More...
Jodi December 13, 2012 for Model Number RB215BSSB I need to order the ice maker part #DA97-00258E. Does this include everything? I believe the technician that came out said it was missing a "tray".
1 Answer Jodi, part number DA97-00258E (DA97-00258E) is the icemaker head only. The tray is part number is part number DA63-02284B. Thanks! Read More...
Charles December 11, 2012 for Model Number Samsung RB215LASH I need to order an icemaker assembly to replace mine that has broken down. Do you guys have one available for purchase?
Bart August 28, 2012 for Model Number RB215LASH The ice tray fills with water, but after a few minutes it refills the tray with more water and then the water overflows. Why?
1 Answer Hello Bart. If the temperature in the freezer is correct, the icemaker DA97-02203H is bad and will need to be replaced on the unit. Read More...
Tim June 19, 2012 for Model Number rb215bssb I held the black button on the bottom at front, the tray wouldn't rotate and no sound was made. There appears to be no cracks or damage anywhere else either.Thanks for your help. What next?
1 Answer Hello Tim. Based on the information you provided, it sounds like the icemaker DA97-02203H is bad and will need to be replaced in the unit. Read More...
Tim June 19, 2012 for Model Number rb215bssb Ice tray just fills up with ice block..doesn't form and dump cubes? What do I need
1 Answer Tim, First, press and hold the black rubber button on the bottom of the ice maker control head and make sure the ice tray rotates and at least attempts to drop the cubes. Check the ice tray DA63-02284B for cracks. You'll also need to check the ice maker housing / support DA61-02183A for cracks and damage, especially the rear support wall where the tab on the tray catches the tab on the wall to "twist" the tray and drop the cubes. Thanks and Good Luck Read More...
Palo December 14, 2011 for Model Number RB215LABP I order part# AP4335223 it says complete does that include the ice tray?
1 Answer Hello Palo. Yes, DA97-02203H includes the ice tray and head assembly. It does not come with the ice bucket. Hope this helps. Read More...
Pam November 29, 2011 for Model Number samsung RS2555SL Freezer starts blinking -4 degrees, then ice maker motor is extremely hot. Already replaced Thermister. It makes ice, but then it melts and starts dripping because the motor gets so hot. Thanks.
1 Answer Hi Pam. This meand that the ice maker head that contains the switches contacts that are shorted together and allowing the mold heater to stay activated. You can either replace just the head assy. part # DA97-00258E, or the complete ice maker part # DA97-02203H. Thank You. Read More...
Terryl September 05, 2011 for Model Number samsung RB215LABP Water will not go into icemaker. I already replaced the water inlet valve. What do I Do next?
1 Answer Hello Terryl. Check and make sure the fill tube is not frozen over. If not, you will need to replace the ice maker DA97-02203H. Hope this helps. Read More...