Dmeggs May 18, 2018 for Model Number WPW10546503 I ordered and received the part. No instructions included for replacing the part, how do I get the old one off to replace it?
1 Answer Hello Dmeggs, There should be either a couple of plastic clips that will need to be released or a couple of screws holding the part in place. This is determined by the particular model configuration you have. For more detailed instructions, we would need to ask you to please post a new question that includes the model number from your units' I.D. tag. Thank you for your patience and understanding in this matter. Read More...
John January 31, 2018 for Model Number KUDE50CXSS9 Need left and right upper rack adjusters part number w10380480.
Balendran January 20, 2017 for Model Number kude60fxwh4 Rack adjuster for this dishwasher has part number w10354718. It looks like the adjuster you have for this dishwasher is WPW105446503. But this adjuster is not quite fitting the inserts on the rails. This adjuster hooks are slightly larger than the insert points.
1 Answer Balendran, We are not aware of any changes in the dimensions or attachment points of the rack adjuster assembly or installation problems. In most cases it takes about 10 minutes from start to finish to replace the adjuster. Using a screwdriver or needle nose pliers to separate the tines slightly, to allow for an easier install and proper alignment of the rack and adjuster is advantageous for the repair. Thanks, Read More...
Nm Lady December 19, 2016 for Model Number 66512782k311 I have a Kenmore Elite Dishwasher (model 66512782K311), and it has the flimsy plastic rack adjuster arms (part # WPW10546503). This little ears that attach the rack to the track keep breaking. Is there a replacement kit that can eliminate this problem
1 Answer NM Lady, The manufacturer substitutes the original part to WPW10546503 but does not show whether it has been redesigned for this issue. Read More...
Zelpha April 12, 2016 for Model Number KUDE60HXSS4 I need to replace the left hand side upper rack adjuster. I only see the part for the right hand side. On the diagram for upper rack and track parts it is item #4 but for the left side. As I look at mine the left and right are not interchangable. Please advise.
William November 27, 2015 for Model Number KUDE48FXSS4 I need to purchase an upper rack part. I believe it is the "adjuster". On the right side as you face the machine a small plastic nipple has broken off. It holds up the end of the rack closest to the door. I have found two parts numbers on it. W10418314 (could possibly say 814) and w10354718. Can you sell me what I need?
1 Answer William, The part number that you would need for the adjuster on your unit is WPW10546503. Read More...
Steph October 21, 2015 for Model Number KUDE48FXPA5 Both sides of my upper rack have broken and will not stay on the track. Does this part work for both sides or just the right?
1 Answer Hello Steph, The WPW10546503 is used on both sides. The adjuster housing is different from left WPW10588164 to right WPW10588165. The left W11259785 and right W11259786 track assemblies are different also. Read More...
Pete September 24, 2015 for Model Number KUDE48FXPA Part # W10546503 Adjuster I just purchased this part from you. Do have any instructions on how to install it?
1 Answer Hello Pete. 1. To gain access to the removable tabs on the tracks/rails, pull the upper rack forward about halfway out of the tub. 2. On one side, press the tab on the track in and pull up the front end of the rack out of the track. 3. Then repeat this step on the other side to completely remove the front end of the rack. 4. Then remove the back end of the rack, by pulling the back end out with a slightly forward, and then upward motion. Then unsnap the adjuster from the rack. Read More...
Vedrana September 09, 2015 for Model Number MDB8959BSBO I need to replace an Upper Rack Adjuster for Maytag model MDB8959BSBO. On the broken part I have at home there are three different part numbers W10354718. W10418314, W10306646. Which one of these is the right one? Is there a difference between left and right side (doesn't look like there is to me but under one of the parts it specifically says for right side)? In case there is a difference it is the left side when I am standing facing the dishwasher. Thank you
1 Answer Hello Vedrana, The upper rack adjuster is part number WPW10546503. This is if the model number is actually MDB8959SBS0, (the one provided does not come up as a valid model number). Read More...
Jim August 12, 2015 for Model Number KUDS30IXSS4 On my Kitchenaide, the 4 axel clips that hold the wheels on my top rack adjuster have all broken. The clips are molded from the rack adjuster so I assume I need 2 new rack adjusters and will be able to use the existing wheels. Can you please advise if this is correct as well as the correct model number of the part I will need? Thank you