Jackson January 14, 2019 for Model Number KG25H0XMC I have to replace the replace the speed control assembly of my Kitchenaid, and the currently assembly matches exactly with what is shown in the picture except for one item. Where it says "PART No" mine has Rev - C and Rev - A. Does that difference matter when purchasing this part?
1 Answer Jackson, the correct part number for the speed control is [WP9706648]. I would not be concerned with the version number as long as the part number is the same. Read More...
Adel Bakry January 14, 2019 for Model Number KP26M1XQG thanks for your help what about the motor because i may need to replace it my wife made a huge mistake by butting the blog in 220 volt instead of 110 volt thanks again
1 Answer Adel, The motor for the model number you supplied is WPW10247536 / W10247536 Motor, 120 Volt. You didn't mention an issue with the mixer, but in "most" cases, the motor isn't the problem, and seldom needs replacement. Read More...
Adel Bakry January 14, 2019 for Model Number KP26M1XQG I am looking for the speed control board for this kitchenaid mixer. The serial number is W52426246 and model is kp26M1XQG. What are the correct part numbers so that I may order the correct parts from you? Thanks adel bakry
Scott Cericola December 14, 2018 for Model Number KP2671X I have Model KP2671X, it is running about half speed, 32/min=#1, 60/min=#6, I have located parts and find the speed control WP9703312 is discontinued and the only replacible part is the mixer control WP9706648. When doing a search for the speed control it always bring up the mixer control and matches both part numbers. I assume since the speed control is discontinued that the replacement parts are now combined with the mixer control board? Would you give me some direction for this fix?
1 Answer Scott, Unfortunately the speed control assembly WP9706648 has been discontinued with no suitable replacement available. Read More...
Tony November 02, 2018 for Model Number KP26M1XQG5 I need part wp9706648 but it has to have 4 wiring connectors, not 2 like some of the replacement boards with the same number. Does your board have the 4 connectors as shown?
1 Answer Tony, For the model, you provided this is the only controller the manufacturer lists. If they use this board for several models then I believe it will come with instructions. WP9706648 Read More...
Yolanda May 21, 2018 for Model Number KV25MCXOB5 kitchenaid mexer 500 series I was looking for the actual speed control lever. The lever on my mixer gets stuck at times while moving it between speeds. The mixer works great I just have trouble selecting the speeds because the lever won't budge at times. Thank you
1 Answer Hello Yolanda. You will need to order and replace the speed control WP9706648 on the unit. Thank you. Read More...
Habslayer May 18, 2018 for Model Number KItchenaide Dishwasher What sensor needs replacement when the water won't start after closing the door
2 Answers Hello Habslayer, I'm sorry but we will need the model number from your units' I.D. tag so we can pull up the wiring information on the unit you have in your home. Thank you for your patience and understanding in this matter. Read More...
Habslayer May 18, 2018 for Model Number KItchenaide Dishwasher What sensor needs replacement when the water won't start after closing the door
2 Answers Habslayer, You will want to check to make sure that the water valve is getting 120 vac to it and if it is then this will most likely be caused by a faulty water valve. Read More...
David N April 15, 2018 for Model Number KP26M1XPM5 Does the speed control sensor come with this part,a Speed Control Assembly Part Number: AP6013722 Made by: Amana my board which I suspect is bad, has the part # 9707220 on it as does your picture of the part. Read more: http://www.appliancepartspros.com/whirlpool-assy-control-knob-wp9706650-ap6013722.html#ixzz5CmYxi2iw http://www.appliancepartspros.com
1 Answer David, Yes the hall sensor will come with the speed control assembly WP9706648. Read More...
Michael March 10, 2018 Part Number: AP6013720 Made by: Amana I am interested in purchasing the above part. Will the part sent match the photo and not the "new" version that looks like a cheap knockoff that most others are offering?
1 Answer Michael, The photo of the speed control assembly will be the same as what is in the photo on the website. Read More...