Morris April 11, 2015 for Model Number GS6NBEXRB00 I have a problem with my ice maker not working. I performed all the test on the ice maker and the water inlet valve and they check good. I read where the water filter might be restricting water pressure so I removed the water line coming to the unit and the pressure checked good. I replaced the water filter and filled a measuring cup with water. The cup came up to 4 ounces but the digital read out on the refrigerator said 8 ounces. Is there a way to bypass the filter so I can test the water pressure?
1 Answer Morris, To bypass the filter to check to see if it is the issue, you would just remove the filter. There is no filter bypass for this unit. Read More...
Eileen T April 05, 2015 for Model Number WRS322FDAT00 I changed my water filter for the first time. I can not get the indicator light in the refrigerator to go from red to green. I followed instructions--push 5 times in 10 seconds. Does this mean the filter is not in correctly?
1 Answer Eileen, If the filter reset is not working then the control board WPW10366605 would be the issue with the unit. Read More...
Randy March 28, 2015 for Model Number GLD5960N00SS I have a GE dishwasher model number GLD5960N00SS and when I push the start button, the lights flash, the pump starts, and then it just quits.
1 Answer Randy, With the dishwasher having the pump start and lights flash then quits you will want to check the door switch to make sure that it is not loosing connection, check the water valve to make sure that there is power getting to the valve. Most likely issue with this will be in the control board. Read More...
Randy March 13, 2015 for Model Number ED5VHEXVQ01 My refrigerator will only dispense water with the filter removed. Installed a new filter and it still will not dispense with the filter in.
1 Answer Hello Randy, You will need to replace the water filter housing WPW10121138. There is a bad valve inside it that the filter actuates causing the problem. Read More...
Tee March 11, 2015 for Model Number W10321466A Put in a new water filter. Thought I did it right. Water out front tastes bad. Went to remove filter but front cap came off without filter attached to it. Eject button is pushed in also What do I need to do? I'm stuck & not real mechancially inclined. Thanks.
1 Answer Hello Tee. If the filter is stuck in the housing and the button is pressed all the way in, you will need to replace the filter housing and water filter on the unit. Read More...
Steve February 25, 2015 for Model Number KSSC42QVS05 Hi, I replaced my water filter (Whirlpool 4396841) and water dispenser not dispensing water. I can hear it working, but no water. I have tried it for an extended period of time in case it needed to have air flushed, but still no water. I also took out the filter and tried and still no water. Was working fine yesterday before I swapped out filters. Any ideas? Thanks in advance for you help
1 Answer Hello Steve. It sounds like the filter housing WPW10121140 may be bad and need to be replaced. Read More...
Jet February 13, 2015 I replaced Whirlpool water filter "pur" 4396710 and now water won't flow and new ice won't form. Initially no water flowed, then it did flow while I filled up a quart container, and then it stopped again for good.Why? Can I fix it?
1 Answer Jet, You will want to pull out the filter and see if water flows with the filter out. If it does not then most likely the water filter housing is bad and would need to be replaced. Read More...
Brian February 05, 2015 for Model Number WRT771RWYW01 I've got a Whirlpool fridge with a water dispenser inside the fridge after opening the door. I just replaced the water filter and now every time the ice maker tries to kick on, the water filter is pushed out of the housing a little causing the housing door to kick open. We just had a new water line spicket put in since the kitchen was re-done and that spicket has a lot of pressure, thought that was the issue so turned the on/off valve so it was barely on causing the water dispenser to barely drip water when pressed, however the water filter still got kicked out of the housing when the ice maker would kick on. It's causing the ice maker to not make any ice. Tried putting the old filter back in and same issue, so it's not the new filter.
Lor February 05, 2015 for Model Number Whirpool Gold I have change my fridge filter before. It is a side by side fridge with an in grill filter. I can not turn it easily to remove it. Like it is stuck. Any ideas on how I can get this filter to turn so I can pull it out and replace it. Thanks.
1 Answer Lor, You will want to push in on the button next to the filter to get it to pop out based on the part number you gave which is EDR3RXD1. If you have a twist out type then pull the kickplate off and it will be easier to turn out Read More...
Stephen S January 31, 2015 for Model Number ED2VHEXVQ01 Whirlpool Model ED2VHEXVQ01 : No water pressure at water dispenser, drips put slowly. Changed filter made it worse or at best no difference. Left filter loose in filter holder, have water pressure like from the day it was new. So whats up with this, what's the fix?
1 Answer Stephen, If the water works with the filter out then the issue will be with the filter housing that you would want to replace the housing due to the filter pins not engaging and allowing water to pass properly through the filter. Read More...