Cindy June 24, 2012 for Model Number maytag MDBH949AWB1 I pulled on the floater and the tip broke off. I need to know if I can just push it down in there to install it and if I need to get that tip out. I don't know anything about this. Thanks
1 Answer Hello Cindy, If the float breaks, it should be replaced. If the float WP8268913 comes out of position it can cause water to go in the floor. Note that the float comes with the little push on retainer. To install it you will have to remove the kick panel and push on the little retainer. Read More...
Jack December 12, 2011 for Model Number 66517372300 Finding small black granules in tub after cycle is finished.
1 Answer Hello Jack. You will need to check and see if the water level inside the tub assembly is low. If so, it will cause the problems you are having with the unit and you will need to replace the water valve WP8531669. Hope this helps. Read More...