Sam November 17, 2022 for Model Number DU890DWGX1 Hi my soap dispenser door does not close at any time. The spring & the door appears to be intact since there appears to be strengh in the spring Will replacing the latch kit # 676413 solve the problem
1 Answer Sam, Make sure that the latch area is clean and free of anything that would cause it to not move properly but it does sound like a new latch kit will be what is needed. Read More...
Karl January 27, 2021 for Model Number DU915PWSS0 the dishwasher is leaking where the soap dispenser latch comes through the door. ive ordered the latch kit part#676413, but it does not come with any seal. Is there a seal for this unit?
1 Answer Karl, Unfortunately, there is no seal for the latch assembly on the dishwasher. You would just install it and the way that it is designed it should not leak. Read More...
Edward J September 15, 2016 for Model Number Du810swpuo My dishwasher leaks from soap dispenser latch in the inside of door and there seams to be no gasket. What could be the cause of the leak?
1 Answer Edward, There would be a gasket on the inside of the door that if the latch is leaking then you would need to get the latch kit part number 676413. Read More...
Dave August 28, 2016 I have a leak at the soap cup latch. The part appears to be in good condition. The model does not show a gasket. Any suggestions on how to get the leak to stop?
1 Answer Dave, We would need to have the model number of the unit to be able to assist properly but if your unit will take just the latch kit then you would have to replace the kit as it should have a seal with it. Read More...
Courtney April 08, 2016 for Model Number PINS24F9A My pin is broken on the soap dispenser, but my model number is completely worn off. Can I still purchase and install this?
1 Answer Courtney, The model number that is listed comes up as a refrigerator and we would not be able to locate the pin for the soap dispenser without the model number of your unit. Read More...
Paulette March 14, 2015 for Model Number 66515634000 I was having trouble with detergent door staying closed. It appears to not be the spring. The latch would not hold the door. I ordered the latch kit, watched the video, and followed the instructions for the repair. Now, after installation, the latch does not release the door. After the completed cycle the door is still closed and the detergent remains in the dispenser.
1 Answer Paulette, You'll need to check and make sure that the actuator/draw bar assembly WP3369505 is seated and attached to the wax motor assembly WP3374501 and check the wires and condition of the wax motor, or replace it. The wax motor expands and contracts when power is applied or removed. The actuator moves and latches or unlatches the detergent door and rinse agent dispenser. Read More...
Brian February 13, 2015 for Model Number DU1055XTVS1 The blue latch on the soap dispenser door is broken. Is there an individual piece I can buy or do I have to purchase the whole dispenser assembly?
1 Answer Hello Brian! Unfortunately, you'll need to replace the dispenser assembly, part number WPW10224428. Sorry. Read More...
Domenico January 26, 2015 for Model Number whirlpool mod:DU811SWPQ0 The soap door will not open when I run a cycle. The latch is holding the door shut but when I turn the dial it still won't open the soap door. Which parts do I need to fix this? whirlpool mod:DU811SWPQ0
1 Answer Domenico, You will want to open the door of the unit and remove the inner door and see if there are any loose or broken parts to the detergent latch. Make sure that the spring is attached. Read More...
Brenda April 15, 2014 for Model Number DU930PWKB0 How do I install Part Number: AP3130817? Thank you.
1 Answer Hello Brenda. Here is a video link to help you. https://www.youtube.com/watch?v=5qSjaIfbFGA Read More...
Dan September 16, 2013 for Model Number GU2275XTVY - Whirlpool dishwasher The cover latch for the main wash section keeps popping out. It has now landed on the heating element and melted. Is there a replacement cover latch? Purchased 12/05/10 from HH Gregg.
1 Answer Dan, parts to the dispenser assembly for your model are not available separate from the dispenser part number WPW10195175. Thanks. Read More...