Paul D. March 24, 2012 for Model Number 110.97374200 Dryer has started on its own a few times, without pushing the start button. It seems if the door is closed (as it usually is), the timer will keep moving, after a normal cycle, and the dryer will turn itself on again, even without a push of the start button. Door switch is okay, timer seems to be working, and the start button feels okay, but could the start button be made up all the time and restarting the cycle on its own? Thank you
1 Answer Hello Paul. Here is the part number for the timer WP3398190. Based on the information you provided, it sounds like the contacts inside the timer are sticking and causing the timer to advance and continue running. It does not sounds like the start switch on the unit. Hope this helps. Read More...
1 Answer Linda, A bad or "sticky" start switch WP3395385 could be the problem, but not likely. It's only a momentary switch, and is on the neutral side of the circuit. Have you run the dryer on the "timed dry" selection, and did it "shut off" ? At this point, the more likely issue would be a bad door switch W10820036 or timer assembly WP3398190 Good Luck. Read More...
Jeremy April 12, 2011 for Model Number ler5600hq0 Dryer would not start everything seems to have power. Is it normal for push to start button to go out? Dryer is about 10 years old.
1 Answer Hello Jeremy. You will need to test the thermal fuse WP3392519 and make sure it is good. It should read closed for continuity. Also check the door switch WP3406107 and make sure it is good. Hope this helps. Read More...