John January 16, 2015 for Model Number AP4364232 I've replaced this part at least 4 or 5 times in the 8 years I've owned this dishwasher. Is there a warranty in any way shape or form? The last two control panels each lasted less than a year. Thanks for the help
1 Answer Hello John, If you ordered the part from us, we give a one year warranty on the part. I doubt there will be any warranty if you purchased it elsewhere since the manufacturers' part warranty is only 90 days. Read More...
Hadex May 30, 2014 for Model Number MDB5601AWB3 I'm "pretty sure" the control panel is the issue but not positive. All I need to do is hook up the ribbon cable, not install the panel. So just in case that doesn't fix the issue, what is your return policy for electronic parts?
1 Answer Hadex, Here is the link to the return policies for parts purchased through appliancepartspros.com. http://www.appliancepartspros.com/customerservice/returns.aspx Read More...
Kb April 21, 2014 for Model Number MDB5601AWS Part# AP4364232 comes with the control panel. My control panel is fine I just need the large plastic part. My door latch (plastic push handle) ears have broken out.
1 Answer KB, you must replace the control panel 6-919819 to obtain the part that is broken. Thanks! Read More...
Tom D December 07, 2013 for Model Number ap4364232 How hard is it to replace touch panel on maytag dishwasher model mdb8601awb10.
1 Answer Tom, To replaced the touch panel on your unit, disconnect the power to the unit. Once the power is disconnected, open the dishwasher door and remove the screws around the upper inner door. There should be 4 or 5 and then on going down the sides of inner door panel. Once removed you should be able to remove the control panel. You would then just need to switch the parts from one panel to the other. Read More...
Dan October 08, 2013 for Model Number MDB5601AWB Our dishwasher would sometimes not respond to our inputs at all. After waiting a bit it would then decide to respond to inputs. Now it will not respond at all. Is this a touch panel controller issue or a control board issue?
1 Answer Hello Dan. It sounds like the touch pad 6-919819 is bad and will need to be replaced on the unit. Read More...
Rick September 16, 2013 for Model Number Maytag MDB5601AWb Dishwasher Is it posible to purchase a replacement ribbon cable for the touch control panel on this Maytag dishwasher? I don't think I need the entire touch panel.
1 Answer Hello Rick. No, you must order the control panel 6-919819 for the ribbon cable. Read More...
David September 05, 2013 for Model Number mdb5601aws Hi, The start button does not work sometimes on the dish washer, if I take apart the door and wiggle the ribbon cable as it goes into the door panel it will work for a few times. Is there a way to re-seat the cable on that end? I have re-seated the ribbon cable on the control box end but that does not seem to be where the problem is. Thanks
1 Answer Hello David. No, you will need to order and replace the control panel on the dishwasher. Read More...
Arlene Ryan September 01, 2013 for Model Number MDB5601AWQ3 I have a problem where just the heavy light and heated dry work. Washes for 2 hrs. I had someone come in and look at it and he believes it is the touch pad. However after reading other questions and answers on line, it seems to me that the problem might be the control panel. I have a bisque or almond color maytag dishwasher. Will control panel be inside?. If it turns out to be touch pad do you have that color. Is this part guaranteed? Thanks
1 Answer Arlene, The control panel 6-919819 comes with the keypad already attached to it. You will want to open the inner door and disconnect the ribbon harness and check it for damage. It sounds like the issue may be dirty contacts and you would want to clean them and if they are ok then replace the control panel. Read More...
Mary L July 12, 2013 for Model Number MDB5601AWW I own this model dishwasher and want to change it's color to a stainless steel look( w/black) to match my new appliances. I want to know if the panel control (AP436315) can easily be removed and the outer plastic area spray painted black or if there are wires and plugs attached, which will make it difficult to do?. Also does the whole door have to be taken apart or can the plastic panel just be removed?. I don't want to remove the panel and take a chance to mess up wires/control etc. if they are attached to this unit. The dishwasher works fine and I don't want to cause a problem.
1 Answer Mary, To take the control panel off to the unit, there will be plugs and controls that have to be disconnected. To remove the control panel the inner door panel of the dishwasher will need to be taken out. Once out there will be 4 screws that hold the control panel to the front panel of the unit. As far as painting the control panel, you may be able to paint it with a special plastic paint. Read More...
Jeff April 16, 2013 for Model Number Maytag MDB5601AWW Only some of the LED lights on the control panel will light when the button is pushed but not all buttons work when pushed. Today the Start and Delay buttons stopped working or at least won't turn the DW on. I am assuming the problem is the control panel itself because the buttons and LED lights have continually stopped working one at time over the past year. What else could my problem be or should I check?
1 Answer Jeff, You will want to check the ribbon harness going from the control panel to the control board to make sure that there is no corrosion and that there is a good connection. If this checks ok then you will need to replace the control panel. Read More...