Ted September 01, 2015 for Model Number WRS571CIDM01 I see many questions regarding not using a water filter. My water line to the refrigerator is coming from a reverse osmosis system under my kitchen sink. Can I run the water & ice dispenser on this model, which was just delivered today, without the filter being in place? Also, the owner's manual says 1 cup of dispensed water in about 8 seconds. I'm getting half that. Will removing the filter, assuming I can do so, help with more pressure? Otherwise I'll grow even older waiting for chilled water.
1 Answer Hello Ted. Reverse Osmosis Water Supply IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa). If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa). If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 to 414 kPa): ¦ Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary. ¦ Allow the storage tank on the reverse osmosis system to refill after heavy usage. ¦ If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. No By Pass Required Remove Filter. If you have questions about your water pressure, call a licensed, qualified plumber. Read More...
Brian August 29, 2015 for Model Number LG LSXS26326S Since we have a filtered water system, we didn't need the filter. Is there a water filter bypass plug for LG model LSXS26326S? Thanks
1 Answer Hello Brian, Since I could find no listing on the model number you provided for a bypass plug, I would try dispensing water with the filter removed. Many of these can be used without the filter inserted with no bypass plug. Read More...
Jackie August 27, 2015 for Model Number Whirlpool Model # WRS576FIDM My Whirlpool model #: WRS576FIDM. I don't want to use the water filter. Is there a water filter bypass plug or I simply remove the filter? Thanks. Jackie.
1 Answer Hello Jackie. They do not show a way of bypassing your filter. You can try using the water without the filter installed. If it does not work or leaks out of the housing, you will have to use a filter in the unit. Read More...
Jerry August 06, 2015 for Model Number WSF26C3EXW We have a whirlpool fridge that we bought 3 years ago. My water quality where I live is good. . My question is, can I just remove the filter and still use the water and ice dispenser without harming the fridge. Thanks Model Number WSF26C3EXW
James C. July 27, 2015 for Model Number 53259201 Water has white particles with new filter. House water clear.
1 Answer Hello James. You will need to run about 3 gallons of water through the filter to clear it up. This is usually carbon from the filter in the water. Read More...
Ron S. July 22, 2015 for Model Number KSF26C7XYY02 Can you verify if a Bypass Plug is available for the KitchenAid refrigerator model noted? If not, can the water filter (W10291030) simply be removed and the water and ice maker will still function without any issues?
1 Answer Hello Ron, This unit does not require a filter. Removing the filter will allow unfiltered water dispense. Read More...
Don July 10, 2015 for Model Number KFIS29BBWH00 I want to replace filter 2 (W10413645A) with a bypass plug. Can you give me a part number for the bypass plug.
1 Answer Don, Unfortunately the manufacturer is not showing a bypass plug available for this unit. The filter cannot be removed and ice and water cannot be used without a filter in place. Read More...
A.J. July 09, 2015 for Model Number Whirlpool 3 Drawer Refrig Can I disconnect the auto notification that starts beeping every 6 months? I don't use that much water and it seems this is just a gimmick to make you buy filters.
1 Answer Hello A.J., This can cause a filter to be changed before needed since the filter is designed to filter a certain quantity of water. All you have to do is reset the filter alarm unless the water flow has slowed down during water dispense. This would indicate the need for filter replacement. Read More...
Vickie June 28, 2015 for Model Number WRS325FDAM02 We have a whirlpool fridge that we bought in April. The water has never tasted good. We flushed it as recommended but the water still has a horrible taste. My water quality where i live is good. . My question is, can I just remove the filter and still use the water and ice dispenser without harming the fridge. Thanks
1 Answer Vickie, Yes the water filter would be able to be removed without the use of a filter bypass and not harm the refrigerator. Read More...
Larry June 26, 2015 for Model Number ED2KVEXVQ01 Manual says I can use the dispenser without a filter in place. The water will just not be filtered. I would like to leave the filter out permanently . Is this ok and do I need a bypass cap. I have been running it without a filter with no problem and apparently do not need a bypass cap. True?