Pam October 01, 2011 for Model Number Kitchenaid ksrb22fkss03 Does Part Number: AP2984633 Made by Whirlpool fit the Kitchenaid Sukperba side by side ksrb22fkss03?
1 Answer Hello Pam! The replacement icemaker used in the given model is part number WPW10190961. Thanks! Read More...
Josue A. September 30, 2011 for Model Number KSRS2SFGWH00 The water line is connected but the water does not get to the ice maker.
1 Answer Hello Josue! This answer was located on our Repair Forum, this is a free service in which technicians will assist with answering repair questions for our customers. Please use this link to assist in your repair. Hope this helps! http://forum.appliancepartspros.com/refrigerator-freezer-repair/253987-ice-maker.html Read More...
Riverplate September 29, 2011 for Model Number MAYTAG Model MFD 2560 HES Water it is not getting to the ice maker. I have checked the the whole maker, the arm seems to work, I have removed the housing, and the timer wheel is rotating. I went to the back, bottom left, remove the plates, and the hoses are fine, I can clearly see that there is water for the water dispenser, and water for the ice maker is half way there. Each of those hoses are connected to a sineidol, relay, or some sort of electrical part that obviously work as a water pump. I said obviously because I've removed their electrical cables, then I've pressed the water dispenser button, and no water came out. Plugged back in and the water come out of the water dispenser.....So I am assuming that I have to replace that part? Your expert opinion is welcome !
1 Answer Hello Riverplate. If the icemaker is working properly, and is sending power to the water valve during harvest, and the fill tube is not frozen, you will need to replace the water valve WP67005154. Hope this helps. Read More...
Bob S. September 29, 2011 for Model Number AMANA ARB8057CW REF I have an AMANA ARB8057CW REF and the ice maker is making small icicles near the front of the unit (towards the door). This only happens when the bar is in the down position (bar up = no icicles). Can you tell me if I need the ice maker assembly (AP4135008) or the valve (AP4303451) or some other valve? ……. Or could it be that the unit is not level?.........Thanks!! Bob
1 Answer Hello Bob. Check and see if the freezer door is sealing good. If not, you will need to replace the door gasket 67003558, based on the information you provided. Hope this helps. Read More...
Mike D September 27, 2011 for Model Number ED27DSXDW05 Is this a complete original replacement ice maker for my Whirlpool side by side? Model ED27DSXDW05 Numbers on the ice maker IM #S 106 626633, 185w-115-60HZ, LR5019, -25-96 Date on tag Is this an easy installation?
1 Answer Hello Mike! Yes, the icemaker assembly 4317943 is the correct replacement icemaker used in your Whirlpool Refrigerator model ED27DSXDW05. Thanks. Read More...
Krystal September 15, 2011 for Model Number sub zero 550 Does this ice maker fit my refrigerator model? If not do you carry one that does? I also need the ice tray. Thank you.
1 Answer Hello Krystal. Sorry, but we do not carry Sub Zero parts at this time. However, the whirlpool icemaker 4317943 will work with the 550 models. Hope this helps. Read More...
Bob September 14, 2011 for Model Number TZ21Q2L Water has stoped flowing into the ice maker. What model number ice maker do I purchase that works with this Amana refrigerator?
Gerardo G. September 14, 2011 for Model Number SCD25TW This is the icemaker used on my Amana Refrigerator SCD25TW.
1 Answer Hello Gerardo! The icemaker used on your Amana Refrigerator SCD25TW is part number D7824706Q. Thanks! Read More...
John R. September 14, 2011 for Model Number M1BXXLZYB00 Just bought a new maytag fridge, and can not find the right ice maker. The wiring harrness needs to plug into the plug in the freezer. The freezer is on top.
1 Answer Hello John. Based on the model number you provided, 4317943 is the correct ice maker. Hope this helps. Read More...
Matthew September 11, 2011 for Model Number 106.7786179 Kenmore cold spot ice maker leaks when filling. Over-flowing, i guess. Then it doesn't produce the ice. Although you can feel that ice has formed in the maker. Ice doesn't get pushed out. new kit, or valve?
1 Answer Matthew, If it was just overfilling, We'd go with a fill valve, But if its not releasing and dispensing the cubes, we have othr issues in the control mechanism, go with the icemaker kit, 4317943 Good Luck and Thanks Read More...