Ivan April 03, 2011 for Model Number MAYTAG MTF2195AEB My icemaker work but if I shut off the Grommet, fill tube and the bearing get clogged with ice. I close the water hose but still have the same problem. I'm tired taken out the ice maker and taking the ice every time. I didn't see any ice maker filter for this model. I need some advice. Thanks
1 Answer Hello Ivan. It sounds like you may have a bad water valve WP61005273. Hope this helps. Read More...
Jackie April 03, 2011 for Model Number Amana AFD2535DEW Can I purchase a replacement auger motor for my ice maker?
1 Answer Hello Jackie! It seems that this model does not come equipped with an ice maker auger. However, there is an ice maker motor. Your part number is 8201515. Is this the part you are needing? Read More...
1 Answer Hello Jamie. If the motor is bad on your icemaker, here is the part they recommend 8201515. Hope this helps. Read More...
George March 28, 2011 for Model Number KSRS251HBL02 Thank you for your response. I was hoping to be able to replace just the led on the board instead of buying both boards. If you could give me more info on just the led I would be very grateful. I'm on a retirement income, and the thought of buying a set of boards for $90.+ when all it may need is a $2 led is hard to swallow.
1 Answer Hello George! Unfortunately, the LED is assembled within the emmiter board. You would have to purchase the kit. Your part number is W11629974. Sorry! Read More...
George March 24, 2011 for Model Number KSRS251HBL02 My ice maker has quit. I suspect it is the LED or light receiver. I tried applying different voltages to the LED, and it wouldn't light. Is it infrared, burned out, what is the voltage, etc.?
1 Answer Hello George. If the boards are not lighting up, you will need to replace them. W11629974 Hope this helps. Read More...
Robert March 23, 2011 for Model Number 106-52582002 I need ferrels for old style valve, cant find anywhere can I order from appliance pros?
1 Answer Hello Robert! Parts on the valve W10408179 are not available separate. You will have to purchase the entire valve. Thanks. Read More...
Terry March 23, 2011 for Model Number Amana m/n SQD25 NBW The icemaker will operate for a short period & then won't run again until it wants to. It will not fill the ice bin before it stops. Twice I took it out & everything looked normal. When I reinstalled it, it would work good for a short period & then stop.
1 Answer Hello Terry. It sounds like the icemaker is bad, and will need to be replaced. Hope this helps. Read More...
Robert March 22, 2011 for Model Number 106-52582202 Ice maker is not getting water to it. I replaced valve and I am getting water to door but not to the ice maker, what can it be- the icemeker?
1 Answer Hello Robert! If you have already replaced the valve and you are still not getting water to the ice maker make sure that the ice maker fill tube line has not frozen or developed any leaks. If it has not, you will more than likely have to replace the ice maker as it is not sending signal to the valve to fill. The part number is 4317943. Thanks! Read More...
Tony March 21, 2011 for Model Number Maytag MBL2562HES I have a Maytag MBL2562HES refrigerator and am having a problem with the ice maker. For the past few months months, the rotating arm on the ice maker was constantly freezing in place and would require some easy prying with a knife to work again. The cubes that formed were very thin and brittle. Eventually, the incoming water tube froze. I cleaned out the incoming tube, hoping that may have been the problem, but no luck. Is there a way to test the ice maker to see if it is malfunctioning?
1 Answer Hello Tony. It sounds like the water valve WP67003753 may be the problem. Hope this helps. Read More...
John March 21, 2011 My maytag side by side has a noise coming from the icemaker. When the door is open it stops. It is not steady. There is a square plastic box i think is causing the noise.
1 Answer Hello John. It sounds like the icemaker is bad. When you open the door, it removes power to the icemaker. Try holding the door switch closed to test this. Hope this helps. Read More...