Rudy September 30, 2011 for Model Number PAV2300AWW Washer goes through the spin cycle but does not empty the water and stops there.
1 Answer Hello Rudy. You will need to check and see idf the lid switch 12001187 is bad if the unit does not drain or spin. It should read closed with the lid closed. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Louise G March 11, 2011 for Model Number RAX7245KQ2 I am trying to get the belt off, and I don't have a manual.
1 Answer Hello Louise. Your machine does not use a belt, it uses a motor coupling in place of the belt. Here is the part number for you, along with a part number for the repair manual. 285753A 4313896 Hope this helps. Read More...
Guest February 24, 2011 My washer won't get garments as wrung out as well as it use to. The spin cycle seems to be just a bit slower than it was. What are the most likely causes?
1 Answer This answer was located on our Repair Forum, this is a free service in which technicians will assist with answering repair questions for our customers. Please use this link to assist in your repair.http://forum.appliancepartspros.com/washer-repair/174417-washer-wont-go-into-high-spin.html Read More...