Rachel June 14, 2011 for Model Number MAYTAG CSG5600CAL Hi, wondering if you can help me. I came home today to find all 4 burners constantly clicking. I turned them on thinking it would reset them and it would stop but it didnt. I had to unplug the cooktop. We took the top off and plugged it back in, checked all the wires, the clicking continued and it seems to be coming from the white box, could the spark module need to be replaced?
1 Answer Hello Rachel. If the switches on the cook top are good, then the spark module 12001596 could be the problem. Make sure the switches WP7403P367-60 are not sending power to the module. If not, you will need to replace the spark module. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
T. Brown June 11, 2011 for Model Number maytag pgr5710bdw Back 2 burners will not light. Igniter arks but wont light burner. Can manually light with match and works fine but not with front knobs.
1 Answer Hello, you could have a dirty burner that is not allowing the correct gas flow to ignite. You could also have a damaged burner igniter. Unless you have little or no spark it could be a bad spark module. Thanks! Read More...
Mahomeowner May 21, 2011 for Model Number JDS9860AAP Out of 4 burners, one stopped sparking. Ordered two ignitors. Replaced , Did not spark! Asked question here and was advised to replace the spark module. Ordered the same. Came a broken piece( plastic to fit in the slot was broken) Tried the same. Still not spark in one burner. What else is wrong now????
1 Answer Hello Mahomeowner. Check and make sure no wires are broken. If not, you will need to replace the igniter switch WP74009874. Hope this helps. Read More...
James M. May 02, 2011 for Model Number CGR3765ADC The top 4 burners on my stove all work fine except for the right front which has a spark, somewhat smaller in size than the other burners, however it can be lit with a match Will I need a spark module, and if so where is it located and which is the right part # My Serial # is 132*********?
1 Answer Hello James. Make sure the igniter is clean and not cracked. If it is good, you will need to replace the spark module. The correct one according to the serial number you provided is 8215557. Hope this helps. Read More...
Mike May 01, 2011 for Model Number mgs5870adc Is the spark module only for the top of the stove or is it also for the oven too? How soon should the flame lite for the oven?
1 Answer Hello Mike. On your model number, the spark module is for the stove top only. The oven should lite within 60-90 seconds. If it is taking longer than that, you may need to replace the igniter 74007498. Hope this helps. Read More...
Jennifer N. April 21, 2011 for Model Number PGR4410CDQ where do I find the spark module in this model stove. The burners worked fine last night and today not even a click so I am thinking it needs replaced.
1 Answer Hello Jennifer. It is located on the back of the range at the bottom of the frame. It is usually on the right bottom corner, looking at the back of the range. You will see several wires going to it. Hope this helps. Read More...
Darko D. April 13, 2011 for Model Number AKS3040BSS I have all 4 burners spark but it takes at least a minute or two to get them to ignite. It happens on all 4. I checked the gas flow and it's not a problem I can smell gas when I leave it on for a little bit. Is there any other part I should be looking at outside of the Gas Ignition Module? Thank you Darko
1 Answer Hello Darko! Check the location where the burner and ignitor meets (there should be a little slit where the gas comes through) this should be clean. If dirty this will cause it from igniting when it should. If the burner area is all clear you could have a bad spark module 8215557. Hope this helps! Read More...
Janelle April 03, 2011 for Model Number magic chef cgr1420bdq Where is the spark module located on the above model?
1 Answer Hello Janelle. It is located on the back of the range at the bottom of the frame. Hope this helps. Read More...
John March 28, 2011 for Model Number Maytag CHG9800BAE I have a Maytag CHG9800BAE and I am unable to find the location of the spark module so that I can replace it. I thought it was underneath the top assembly but I have been unable to locate it thus far. Any help would be greatly appreciated!
1 Answer Hello John. It is located on the back of the range at the bottom of the frame. You will see the wires going to it. Hope this helps. Read More...
Leo March 26, 2011 for Model Number 68-2543-80 I have an Admiral gas range Model # 68-2543-80 Serial# 14C335273332 . The top burners are acting erratic. Sometimes click and lite properly, other times no clicking and have to light manually with a bic lighter. I'm figuring it's a sprk con trol module, just not sure which on. Double checked the model # but dosen't seem valid. Unit is on the old side.
1 Answer Hello Leo. If you are having an issue with all of the burner acting "erratic" then it does sound like the spark module could be the issue. Unfortunately I am unable to find your model number in any of my data bases so I am unable to verify if this spark module will work with your model. This does say it works with older Admiral models so it might be worth trying. Hope this helps. Read More...