Herman November 08, 2012 for Model Number AER5712BAB The front right heating element does not seem to work on low, 2, or3. Would a malfunctioning infinite switch be the probable cause?
1 Answer Hello Herman. Yes, if the switch does not close the contacts, the element will not heat up. Read More...
Jim September 23, 2012 for Model Number mer5765qaq The large dual burner stopped working and after a day or two the small burner also stopped working. Is the problem the switch or the burners, and how do you check to see which it is?
1 Answer Hi Jim. Use a volt/ohm meter part # MA-DM1 to assist you in your diagnostics.It will be advantageous to find the supplied tech sheet inside the cabinet to aid you in the diagnosis. It allows you to look at the wiring diagram and it gives you part specifications which tell you circuit needs assistance. You need to check the rocker switch part # 7403P984-60 above the infinite switch to see if it ohms correctly. It switches for the correct burner size so the dual element infinite switch part # WP74003122 sends the power to the selected burner part # W10823692. Thank You. Read More...
Ken H. January 15, 2012 for Model Number GY397LXUS02 On my front panel, some of the buttons/controls are not responding anymore. Nothing happens when I hit the bake, self clean or warm buttons, but when I hit the broil button it appears to work because the display changes to HI. On my keypad none of the numbers work, just the cancel button. Anyway to reset it or is it a hardware/switch issue?
1 Answer Hello Ken! It sounds as if the ribbon cable is defective and needs to be replaced. Your part number is WPW10207928. Thanks! Read More...
Penny July 09, 2011 for Model Number MER5550AAW Large front right burner, continues to get hotter and hotter even if you turn it down. Is that the switch?
1 Answer Hello Penny. Based on the information you provided, it sounds like the switch WP7403P239-60 is bad and will need to be replaced. Hope this helps. Read More...