Andriana June 16, 2013 for Model Number 110.12502100 My Kenmore: 110.12502100 washer agitates during the wash cycle, but won't drain. Would this part solve the problem?
1 Answer Hello Andriana. If the lid switch is broke, it will cause the issue you are having with the unit. Read More...
Lee H June 06, 2013 for Model Number LSN1000KQ0 My Whirlpool washer will fill water and agitate to wash clothes, however it will not drain or spin to move to the rinse cycle. I had to take the clothes out of the machine and now my machine is just filled with water until I drain it out. Do I have to change the lid switch? Thank you
1 Answer Lee, Yes, you probably will need a new lid switch 3949247V or at least that's where you want to start. The washer is designed to fill and agitate, with the lid up/open. But, the lid has to be down (lid switch activated) in order for the washer to drain and spin. Check and make sure the lid strike WP358684 is still attached to the lid, and the lid switch hasn't gotten dislodged, first Read More...
Stacy May 22, 2013 for Model Number RAB5232WEI My washer is not filling with water and I have replaced the water inlet valve. I'm sure the valve is not getting power, I used a volt tester. But the washer works fine agitates and spins and tries to drain, what could be the problem?
1 Answer Hello Stacy. No, water but does agitate, you will need to order and replace the pressure switch on the unit. Read More...
Tae April 30, 2013 for Model Number dwsr483eg8ww No power on dryer, I check safty thermo open, but I can not part order , I do not have part #, can you tell me part # , on circuit diagram " safety thermo left".
Tae April 30, 2013 for Model Number lsq8543jq0 I heard motor turn sound, but not turn agitator. What part is bad?
1 Answer Hello tae. Check and see if the motor coupling is broke and will need to be replaced on the unit. Also, make sure the dogs in the agitator are good in the unit. Read More...
James April 22, 2013 I have a roper bought in 2005. I have found ras7133pq0 and cs2199482 under the lid . can you help me with the lid switch>? Thanks.
Matthew April 12, 2013 for Model Number Rax7245jq0 Would this be the switch for my 7 cycle roper washer?
1 Answer Matthew, the lid switch assembly 3949247V is the correct replacement for your Roper washer model RAX7245JQ0. Thanks! Read More...
Ken W. April 10, 2013 for Model Number whirlpool duet mod wfw84007woo Washer will not come on. It's like there is no power, but power is ok.
1 Answer Hello Ken. Test for power to the users interface. If there is power there replace the interface. If none is there, then you will test for power to the CCU. If there is power there, and none at the interface, you will replace the CCU. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Christy April 09, 2013 for Model Number RAS8244KQO I cannot locate a lid switch for my Rober top load washer, MODEL NUMBER: RAS8244KQO. Is this part no longer available?
Kenyon April 04, 2013 for Model Number LSQ9564MQ0 I have a Whilrpool Ultimate Care II washer and it does not agitage or spin. When it fills with water it makes loud sounds but nothing moves and the water will eventually start to slowly drain out. I ordered a lid switch, but not the assembly. Do I have all the parts I need to fix this problem? Thanks.
1 Answer Hello Kenyon. You need to check and see if the motor coupling 285753A is broke on the unit. If so, the unit will not agitate or spin, but will drain out the water. Read More...