Mark G May 29, 2014 for Model Number KSCS25INSS01 My fridge door will not close all the way - looks like the door cam is worn. I am going to buy part #AP3046922 which is the door cam (upper) but it looks like there is another cam attached to the hinge (lower) but I cannot find where this is for sale - this also looks worn. Can you please help with a part number.
1 Answer Mark, the lower cam is not available separate from the hinge part number WP2307179. Thanks. Read More...
Bill P March 31, 2014 for Model Number 10659502990 My fridge door will not stay closed, the fridge door when closed is about 1/2" below the feezer door level. My guess would be I need both upper & lower cams ?? I am not sure if anything else is required....Thanks !
Jc March 27, 2014 for Model Number Whirlpool ED5CH0XTB00 I have already purchased the lower cam (2182179). What is the part number for the upper cam?
1 Answer JC, part number WP2182179 is the freezer upper door cam closer. To obtain the upper cams you can purchase closer kit part number 4318165. Thanks! Read More...
Grbs November 13, 2013 for Model Number ED25RFXFW01 My fridge door is not closing all the way on the bottom. We've replaced the gasket and that did not make a difference. I'm thinking the cam is the next thing to try. Do you agree?
Ron May 02, 2013 for Model Number KSCS25FKSS00 My frig door doesn't stay closed. I was told to replace the cam. I was told on this site that I need parts AP3046922 and AP3133075. Do I need both? One for top and bottom? Thanks, Ron
1 Answer Ron, you'll need to inspect both cams and replace the defective part. The lower cam is part of the hinge part number WP2208137 and the upper cam is part number WP2182179. Thanks! Read More...
Susan Z March 15, 2013 for Model Number 10651554103 We just replaced the water intake valve on the back of the fridge. It was different than the previous part but the water on the front of the fridge works. It has not repaired the ice maker..Could this be a defective part, Could it be related to the filter on the fridge or do you think I need a new ice maker..There is no water going in the ice maker hose from the back of the water intake valve?? Thank you
1 Answer Susan, You will want to first check for a frozen fill tube on the unit. When you pull the icemaker out check to make sure that there is no ice build up in the fill tube which would cause not water to flow. If the fill tube is clear the pull the motor module off the icemaker to check for burn marks on the module. Also check the large gear on the front to make sure that the pins in the middle of it are not pushed together and that they are not broken. Read More...
Simon January 10, 2013 for Model Number 10650562990 My fresh food door is lower then my freezer door. Is there a bushing that raise the door up.
1 Answer Hello Simon, There is not a bushing to raise door up. You will need to pull the lower grill off the unit and adjust unit using the adjustment screws. The doors will line up when unit is adjusted. Read More...
Bill K. October 29, 2012 for Model Number KSRS22FGWH02 What is the pat number for upper and lower door cams for both freezer and fridge doors on my kitchenaid superba?
George October 10, 2012 for Model Number Ksrg25fkbt17 My lower refrigerator clicks when fully open. I purchased the upper cam to fix the door. Now when I looked at the hinge more carefully, I see there a lower door can as well . Do I have to replace both parts to fix the door clicking. I have not installed the upper cam yet. Thank you
1 Answer Hello George. Based on the information you provided, it sounds like the door cam WP2182179 is bad and will need to be replaced. It is best to replace the bottom with the top cam. Read More...
Bruce M. September 03, 2012 for Model Number GD25DFXN01 Doesn't the door closing cams have 2 parts: the cam on the door "lower door closing cam" and the one that sits on the door support? You only show one part.
1 Answer Hello Brue, for the lower closer cam you will order WPW10329686 and for the upper cam you will order WP2182179. Thanks! Read More...