Dean August 06, 2019 for Model Number 106.628470 I also bought this timer, Where does the black wire go?! It's a Coldspot Spacemaster 17.I have black, white, orange and pink wires...
Armond August 04, 2019 for Model Number 106.9555781 Hi was wanting to ask which terminal do I put the black jumper wire on I am replacing my defrost timer on a Kenmore cold spot Model # 106.9555781 thanks
1 Answer Armond, look at the wires going to the defrost timer, if you have Black, Pink, Red, and Orange, attach the black lead to the #2 terminal. If you have Orange, Pink, White, and Red, attach it to the #1 terminal. Read More...
Shirley July 29, 2019 for Model Number Rs25agxnq02 I need to replace defrost timer. Which terminal does the black wire go in
1 Answer Shirley, based on your model's wiring diagram, the black wire will go to terminal 1 of the timer. Read More...
Ken July 26, 2019 for Model Number Magic Chef number CT b1821 arw In replacing the defrost timer I have a Whirlpool w10822278 on what terminal does the black wire go?
1 Answer Ken, unfortunately, the timer W10822278 is not designed for use with your model's wiring. As this is the case, it can not be guaranteed to operate properly. Based on how the new timer is designed, and your model's wiring, the terminal will go on terminal 3. Read More...
Jeff July 22, 2019 for Model Number Kenmore 106.70262990 Replacing bad defrost timer unit with new W10822278 defrost timer unit but which terminal do you connect the Black wire.
Jim K. July 20, 2019 for Model Number KTRS20KAAL10 What terminal on defrost timer does the black wire connect to?
1 Answer Hello Jim, You will need to connect the black jumper wire to the number 1 terminal on the defrost timer. Read More...
Jh July 16, 2019 for Model Number ed5hvexv002 I have a Whirlpool side-by-side refrigerator, model ed5hvexv002. Recently I have noticed that the refrigerator turns off and not back on. I saw a video about putting a screwdriver head under the defrost timer and turning it until you hear a click. I would turn the refrigerator dial to off and then turn the defrost timer with the screwdriver until I would hear one click (as there are two total clicks back to back but I would stop after one click). I then would have to rapidly turn the refrigerator dial from off to usually up to "2" and eventually the refrigerator would kick on and start cooling. After x amount of hours it turn off and since it would not kick back on, I would have to repeat the steps above. It sounded like a defrost timer going bad (after 10 years of use) so I bought a new one. I noticed on the new one a blank hanging wire with a connector on the other end. The one that I removed from my Whirlpool (the original defrost timer that came with the unit) did not have this black hanging wire with metal copper-looking connector. I watched a few videos but unsure which of the prongs on the defrost timer the copper connector goes on. I have tried a few different ones but the refrigerator doesn't kick on (there is power) and turning the dial does nothing. I also tried turning the dial on the base of it with a screwdriver like I did with the original one but nothing is turning it back on. The unit was getting quite cold so there is always a chance that I put the copper connector over the wrong prong on the new defrost timer. I will check but if you can let me know based on my model # which numbered prong the connector goes over, I would appreciate it. Other than screwing it back in and replacing all the screws that I removed I can't figure out what else I am doing.
1 Answer Hello JH, the jumper wire of the defrost timer for your model refrigerator goes on terminal 1. The erratic cooling on the ref is likely caused by a failing cold control, the replacement part is WP2198202. Read More...
Eddie July 09, 2019 for Model Number 106.70982991 Purchased defrost timer w10822278 , no instructions .What terminal does the black defrost timer wire go on?
1 Answer Hello Eddie, You will need to place the black jumper lead to terminal number one on the defrost timer assembly W10822278. Read More...
Ann July 07, 2019 for Model Number ET0WSRXMQ03 Replacing defrost timer #W10822278 on my Whirlpool Model #ET0WSRXMQ03. Which number terminal do I put the black lead wire on? Thank you!
1 Answer Ann, The black wire goes over the number 2 first then the connector can be pushed on. Read More...
Jasper July 06, 2019 for Model Number 363.9537750 Do I use the black wire on the new whirlpool w10822278 for my 363.9537759 kenmore refrigerator
1 Answer Hello Jasper, The black jumper wire has to be connected to the number 1 terminal for the model provided for normal operation to occur. Read More...