Earl June 03, 2012 for Model Number 1999 whirlpool gold top freezer Water is accumulating in the refrigerator section. Unit is still cooling but freezer is not as cold as it used to be. Is this a drain problem with defroster section ?
1 Answer Hello Earl. It sounds like the drain is clogged. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/refrigerator-freezer-repair/173916-kenmore-top-mount-refrig-h2o-build-up.html Read More...
Chico May 08, 2012 for Model Number 106.72864100 I'm trying to replace a defrost timer kit on a Kenmore refrigerator: model no 106.72864100. I got everything out but I can't seem to get the defrost timer itself out. The new one came with screws and nuts but I don't see them on the old unit. I'm not sure how to loosen the old timer.
1 Answer Hello Chico, The defrost timer is actually snapped in under the three plastic clips made on the control housing. If your careful with the clips, you won't have to bother with the screws and nuts. The timer will just snap into place. The screws are included in case the clips break off. Read More...
Odie H. April 29, 2012 for Model Number whirpool model#ed5gtn My refridgerator is not cooling, freezer seems ok. There is no cool cool air blowin to refridgerator side,also middle wall between both is hot. Could it be the defrost timer? I havn't heard it defrost.
1 Answer Hello Odie. If there is frost on the back freezer wall, then it sounds like you may have a defrost problem with the unit. Check and see if there is any frost build up on the back wall of the freezer. If so, you will need to test the defrost heater WP2323198 and the defrost thermostat WPW10225581. They should read closed for continuity when cold. You can test this with a multi-meter TJMA-DMT3. I will include a link at the end to assist you how to use the multi-meter if needed. If both parts are good, you will need to replace the defrost timer W10822278. Once the problem is repaired, you will need to thaw out the ice on the coils before the unit will operate properly. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Phil April 29, 2012 for Model Number tz18q2w Hello. do you know where I can find a schematic for defrost clocks like this one that I know which terminals go to defrost heater and compressor so I can do a test for continuity of the defrost heater from the the clock? Thanks.
1 Answer Phil, APP doesn't have access to a TZ18Q2W wiring diagram, This is a pretty old unit and the manufacturer may not have one either. You may have to use an elimination process to repair your fridge. circuit test the defrost heater for a "closed" circuit or 15 to 20 ohms. test the defrost thermostat for an "open" circuit when placed in a glass of iced water, and replace the timer if all's OK. R0168027 is the correct defrost timer for the model number you supplied. Good Luck and Thanks Read More...
Dennis April 23, 2012 for Model Number ED22TEXHW02 Purchased #482493 FSP defrost timer kit - unsure of which terminal to attach black lead... Thanks for your help.
1 Answer Hello Dennis. The black wire on the timer W10822278 goes onto terminal number 2 on the timer. According to the model number you provided. Read More...
Nick April 21, 2012 for Model Number Whirlpool Model # ET1MHKXMT01 Whirlpool Model #ET1MHKXMT01 keeps freezing the drain line in the freezer. I checked for heater continuity OK. I also connected a piece of metal from the heater to the drain. The refrige is 7-8 years old. What else could cause the problem?
1 Answer Hello Nick. Blow through the drain and pour hot water through it and make sure it is not clogged or blocked. Once clear, make sure the unit is level where the water can drain properly, and that the water is flowing into the drain pan on the unit. Hope this helps. Read More...
Jessica April 10, 2012 for Model Number Kenmore Refrigerator 2193084 Hi my refrigerator is making a noise so I was told to replace my defrost timer with model 482493?? The timer has a black wire where should I connected to? Need help thanks
1 Answer Hello Jessica. We are not able to get the wiring diagrams for Kenmore. You will need to look at the colors of wires going to the timer and the number they go to. Then use the instruction sheet sent with the timer W10822278 to determine which terminal to connect the black wire to. Hope this helps. Read More...
Steve March 24, 2012 for Model Number ED25DQXDB05 I ordered a new timer p/n 482493. I have no clue what type of application i have so i do not know where to connect the black lead on the timer. can u help out?
1 Answer Steve, based on the wiring diagram for your fridge, you have a "Cumulative run application" , and will need to install the wiring based on "procedure 2" of the instruction sheet. The black timer motor wire will be slipped onto terminal 2, Black wire of timer harness on terminal 1, Pink wire on terminal 2, Red wire on terminal 3, and Orange wire on terminal 4. Good Luck and Thanks Read More...
1 Answer Hello Frank. The defrost timer W10822278 is located in the fresh food section in the plastic housing that contains the temperature controls. Have a great day! Read More...
Cheryl March 01, 2012 for Model Number Amana side by side model # SRD26VW My amana side by side is icing up on the back wall of the freezer and the ice maker and water stopped working and the refrigerator is not getting cold either. I had a tech come out and he put in a defrost timer and defrost limit switch. It fixed the freezer and refrigerator problem for a short time and then it stopped working again. He had some refurbished parts...so I'm thinking I need to get the same parts that are not refurbished and start over. But I can not find anything called a defrost limit switch on your site?...And I'm not sure about the ice maker and water in the door?....any suggestions? Thank you and God Bless you ...Cheryl
1 Answer Hello Cheryl. R0161088 is the defrost limit switch you are looking for. Check and make sure the water valve is getting power to the unit. If so, and the water is one, you may have a bad water valve WP12544001 on the unit. This is the before the filter valve. For the after the filter valve order WP12544101. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...