Horace October 24, 2013 My model number is mde4000azw with timer model 33001730 as I mentioned I just need to know where to screw the timer to the plastic body , Do I use the existing holes or do I drill new holes to align with the dimpled spots on the face plate through my plastic body. Any help very much appreciated
1 Answer Hello Horace. According to the manufacturer, you do not drill holes to install the timer. Read More...
Horace October 24, 2013 for Model Number mde4000azw On this dryer the timer motor has to be replaced, on the new timer it has two aligning pegs and two dimples on the face plate. The old timer had was a flat face plate. My question is if I place the timer pegs in the plastic dryer body do I make new holes in the faceplate where the old timer was screwed on or do I drill out the plastic dryer body and into the dimpled spots on the new timer. Any help would be greatly appreciated
1 Answer Hello Horace. You need to make sure you ordered the correct timer. Both WP33001730 and WP33002676 are used on the model number provided. Read More...
S.M. September 02, 2013 for Model Number MDG40000BWW Is the timer AP4042430 the right one for my Maytag Neptune model MDG4000BWW? I'm confused with the ELE afer the model number. Does that refer to an electric dryer? Thanks.
1 Answer Hello S.M! To verify the correct timer used on your Maytag Dryer model MDG4000BWW we will also need the appliance serial number. Please verify this information and repost for further assistance. Thank you. Read More...
Dennis August 16, 2013 for Model Number MDE4000AYW We have a Maytag Neptune dryer purchased new in 12/1999. Model # MDE4000AYW, serial # 28669348WZ. The timer isn't working correctly. The timer you show is AP4042430. I am checking to ensure that this the right compatible part for this model & serial #.
1 Answer Dennis, according to your model/serial the replacement timer is part number WP33001730. Thanks! Read More...
Robert M. March 25, 2013 for Model Number Maytag Neptune model MDE4000AYW Original timer would keep rotating and would not shut the dryer off only way was to unplug it. New timer #33001730 will not rotate but manualy will shut dryer off in different locations. Put another new timer same part # does the same thing. Dryer works perfect except for this problem. Thanks
1 Answer Hello Robert, Chances are good that, as long as the duct is clear, the dryness board WP33002389 has failed. Read More...
Brad March 10, 2013 for Model Number MDE308DAYW Buzzing sound was coming from what seemed to be the timer the last time I used the dryer. Now dryer will not start. I can tap on the timer and it starts to make the buzzing sound and tried to start briefly while I was tapping on it. Is the timer switch what's causing my problem?
1 Answer Brad, Based on the information, yes the timer WP33001730 has bad contacts in it and would need to be replaced. Read More...
James January 02, 2013 for Model Number MDE3000AYW What timer do I need for this dryer? I have a fsp3976576 but it does not have the same connection points. Is there a connection cross reference?
1 Answer Hello James. Based on the part number you provided, WP3976576 is the correct timer. Read More...
Ron August 09, 2012 for Model Number MDG4000BWW Ser# 28621386YS Which timer do I need? Not certain since there are two diffrent ones listed. Thank you
1 Answer Hello Ron. Based on the model and serial numbers provided, you will need to order WP33001730 for the correct timer. Read More...
Roy February 01, 2012 for Model Number mde4000ayw ser. no. 28647273yd Which timer do I use for this machine?
1 Answer Hello Roy! According to the given model/series your timer is part number WP33001730. Thanks! Read More...
Roy January 25, 2012 for Model Number MDE4000AYW DRYER- ELE Dryer stopped running, will not start in any cycle. Checked thermal overload by heating unit, start switch, dryer door switch, all OK. With door open and turning cycle switch, sounds like it tries to start for an instant. Moisture light comes on all but one cycle. All this while door is open. Help please.
1 Answer Hello Roy. Test for power to the motor when you try to start the dryer. If the dryer does not start, and there is power to the motor, you will need to replace the motor WP33002795. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...