Frank V Remington , VA March 18, 2016 Timer was not shutting of or advancing Googled what would cause that. Found or needed a new timer. Searched for the best priced timer online. Found one here for a good price. Replaced it myself very easy replacement and saved at least 100 dollars doing it myself. Read More... 8 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers, Socket Set
Camille P New Braunfels , TX June 10, 2014 My dryer would only start in certain positions on the timer dial I was able to look on the appliancepartspros website to see issues that other people were having. I was able to diagnose the issue and order the correct part - the timer. My husband watched the repair video online and replaced the part in about 10 minutes. We saved a lot of money. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Patrick M Swannanoa , NC April 22, 2016 Problem: the timer would stop periodically during the drying cycle The timer seemed like the logical item. We want on line with the part-number, and watched the excellent video on replacing the timer- really helpful. The new timer arrived within 3 days and the replacement made in about 10 minutes. The dryer is now working fine. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Stanley C Humble , TX April 22, 2023 Appliance: Model 100.660097 The dryer would not start After taking the dryer apart, I found the belt was broken. I also checked the timer and found a bad contact and one of the moisture sensors had broken. Our dryer is several years old and I thought the parts would be hard to find. I looked at several sites and was very happy to find AppliancePartsPros.com. Not only did they have the parts I needed, but videos and diagrams were also helpful in checking out the total dryer. The parts were in stock and delivered on time. The repair went well and now my wife is happy to have her dryer back in service. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Nut Drivers, Pliers, Screwdrivers
Bruce K Pikeville , KY August 15, 2016 My dryer would not shut itself off The timer dial was not advancing in any cycle it was set to. I ordered the timer part specified by Appliance Parts Pros for my Kenmore dryer model. I received it the next day! and replaced it in less than a 1/2 hour. After unplugging it, I took the back of the control top off, pulled the knob off, and unscrewed the timer leaving the wires attached. I then connected the wires one-at-a-time to the new timer module. I mounted the new timer with the original screws, put the knob on, and closed up the back of the control top... before plugging the dryer into 220 VAC. I ran a short timer setting to verify operation with a towel inside on low heat. The dryer worked great with the new part. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers