Parts for Frigidaire FDB836GFB7: 07 - Rack Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Replace your dishwasher's lower dishrack assembly if it's rusted, cracked, or has broken tines. This gray rack holds dishes securely during wash cycles.

Replacement silverware basket for dishwashers. Holds flatware during wash cycles. Order if your basket is cracked, broken, has holes, or is missing.

NOTE:  Wheels are no longer included with this part.

Replaces a rusty, cracked, or damaged dishwasher upper rack. Restores smooth gliding and secure loading for cups and bowls on the top level.

The Upper Dishrack Wheel is an OEM part for Frigidaire dishwashers. This part attaches to the upper dishrack, allowing it to slide in and out smoothly along the dishwasher's tracks for easy loading and unloading of dishes.

Common causes of a bad dishrack wheel include wear and tear from frequent use, damage from heavy loads or improper handling, and breakage due to impact.

Symptoms of a bad Upper Dishrack Wheel include:

• Difficulty sliding the upper dishrack in and out
• The upper dishrack derailing or not staying on its tracks
• Unusual noises when moving the dishrack
• Visible damage or wear on the wheel

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Plastic stop cap that secures the upper dishrack rail track in your dishwasher. Replace if broken, cracked, or missing to keep rack sliding smoothly.

Replacement rail for dishwasher upper dishrack. Installs inside tub to guide rack sliding. Replace if cracked, bent, or causing rack to fall off track.

Replace broken, cracked, or missing lower dishrack wheel assemblies. Snaps onto rack to allow smooth gliding in and out of dishwasher. Easy install.

This upper wash funnel directs water flow from the spray arms to effectively clean dishes in the upper rack of your dishwasher. It creates proper water pressure and spray patterns for thorough cleaning coverage. If dishes in the upper rack come out dirty or water doesn't reach certain areas, this wash funnel may be clogged or damaged.

Replacement silverware basket for dishwashers. Holds flatware during wash cycles. Order if your basket is cracked, broken, has holes, or is missing.

White cover for dishwasher silverware basket. Replaces cracked, broken, or missing original cover. Snaps onto basket to keep utensils secure during wash.

Secure dishwasher components with this #8 x 5/8" mounting screw. Replace lost, stripped, or corroded screws to properly fasten panels and parts.

NO.8 - .625 Truss

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Secure hose clamp for dishwashers and washers. Replace if worn, loose, or leaking. Verify fit with your model number before ordering.

6 - 10 x 3/8, pan plask, switch

No.10 - 16 x 3/8

Replacement mounting screw that secures control switches and switch assemblies to the dishwasher panel. Needed when original hardware is lost or stripped.

Stainless steel screw that secures the dishwasher impeller assembly. Replace if stripped, corroded, or missing to properly mount the impeller.

Phillips head mounting screw for dishwashers and ranges. Secures internal components and panels. Replace if stripped, rusted, or missing during repairs.

Plastic dispenser mounting screw for dishwashers. Secures detergent dispenser assembly to door. Replace if stripped, cracked, or missing.

Replacement mounting screw for dishwashers. Secures internal components, panels, and brackets. Order when original screw is stripped, missing, or broken.

Replacement cabinet insulation panel for dishwashers. Installs inside cabinet to reduce heat transfer and noise. Needed when original is torn, compressed, or missing.

This thermistor is the dishwasher's temperature sensor. It reports water temperature to the control so the heater and cycle timing are managed correctly, helping restore reliable wash performance and more consistent drying.

• Monitors water temperature in the tub/sump and sends readings to the control board
• Helps the control regulate heater operation and determine cycle progress/timing
• Failure can result in no heat or poor drying
• May cause unusually long/short cycles or temperature-related fault codes

• Disconnect power at the breaker and shut off the water supply before servicing
• Access is typically from the toe-kick/base area or sump; remove the lower access panel as needed
• Release the locking tab/clip, remove the sensor, and ensure the existing seal/O-ring is properly seated; install the new sensor fully to prevent leaks
• Reconnect the wire harness, restore power, and run a test cycle to check for leaks and proper heating

Replaces missing, torn, or saturated sound-dampening insulation blanket for dishwashers. Wraps around tub to reduce noise and protect cabinetry.

This side mounting bracket kit includes the hardware needed to secure a dishwasher to the adjacent cabinetry from the sides rather than from the countertop. It is commonly used in kitchens with granite, stone, or other countertops where top-mounting screws cannot be used. Replace this kit if the original brackets are bent, broken, or missing, causing the dishwasher to shift or slide during operation.

Brass nut that secures the heating element to the dishwasher tub. Replace if cracked, split, or causing leaks around the element mounting area.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.