Parts for Bosch B36CL80ENS/01: Refrigerator Drawers Parts

This interior appliance lamp provides bright illumination so you can see inside the appliance clearly. It replaces a burnt-out or dim light to restore safe, easy viewing of the cavity. What it does:

• Replaces a failed interior lamp so the appliance light turns on when the door is opened or the light circuit is activated
• Restores visibility for loading, unloading, and checking food without opening the door longer than necessary
• Common symptom: no interior light or noticeably dim light when the appliance door is opened
• Works as the direct replacement lamp for the specified appliance light housing and socket

• One replacement lamp

• Disconnect power or unplug the appliance before replacing the lamp to avoid shock
• Allow the lamp and surrounding area to cool before handling to avoid burns
• Remove the lamp cover or housing, replace the lamp, and reinstall the cover securely
• Handle bulbs with a clean cloth or gloves; avoid touching the glass with bare hands if the lamp type requires it

This light bar provides the illuminated strip for the appliance control panel so button labels and status indicators are visible. Replaces a cracked, dim, or non-illuminating panel light to restore clear control visibility. What it does:

• Houses the light elements that illuminate the control area for easier reading and use
• Restores visible status indicators when original light strip is dim or unlit
• Replaces cracked or discolored lens that diffuses or blocks light
• Helps resolve intermittent or no-backlight symptoms when the light bar itself is the faulty component

• Disconnect power to the appliance before beginning any work
• Access typically requires removing the control panel or console; keep fasteners and clips organized
• Handle the lens and light elements carefully to avoid scratching or damaging the optics

This outer door panel replaces a damaged or dented dishwasher front, restoring the appliance's appearance and allowing the door to close and latch properly. It provides an exact-fit exterior surface that matches the original design. What it does

• Restores the dishwasher's front appearance when the original door is scratched, dented, or cosmetically damaged.
• Supports proper door alignment and latching so the appliance can seal and operate correctly.
• Serves as the visible exterior surface that protects internal door components from moisture and wear.
• Matches original mounting points and finish for a factory-like fit and look.

• One outer door panel

• High-level replacement: may require removing the door from hinges and disconnecting inner liners or trim.
• Use appropriate tools and have a second person assist to avoid dropping or damaging the panel during installation.
• Disconnect power and water to the appliance before servicing.

This door seal is the molded inner gasket that forms a watertight barrier at the dishwasher door, helping prevent leaks and maintain proper wash performance. It replaces a worn or damaged door gasket to restore a secure seal. What it does:

• Seals the dishwasher door to keep wash water and spray inside the tub
• Helps prevent puddles or water on the floor near the door
• Reduces escaping steam and improves dishwasher efficiency
• Restores proper door closure and reduces noise from spray

• One molded door seal/gasket

• Disconnect power and water to the appliance before starting any service
• Remove the inner door panel or access kickplate as required for your model to reach the gasket channel
• Press the new gasket into the door channel, working around the perimeter for a snug, even fit; avoid twisting or overstretching
• After installation, run a short test cycle and inspect for leaks

This retaining plate secures internal components in place to keep assemblies stable and aligned during operation. It helps prevent movement that can cause noise or improper part engagement. What it does

• Holds a motor/pump or nearby assembly firmly to its mounting surface to reduce vibration and misalignment
• Keeps seals and adjacent parts seated to lower the chance of leaks or rubbing
• Stops loose components that can cause rattling, scraping, or intermittent operation
• Serves as a simple hardware piece that maintains correct part placement after service

• One retaining plate

• Disconnect power and water before beginning any repair
• Remove the access panel or relevant cover to reach the mounting area; retain all fasteners
• Align the plate with the OEM mounting points and secure with the original screws or clips
• If other parts must be disassembled to reach the plate, follow OEM instructions

This retaining plate secures internal components in place to prevent movement and maintain proper alignment. It helps reduce vibration and noise caused by loose or shifted parts and restores stable operation when worn or broken. What it does:

• Holds a motor, pump or internal assembly securely to its mounting point
• Prevents shifting that can cause vibration, rattling or rubbing noises
• Keeps connected parts aligned for reliable operation
• Helps maintain seals and clearances that reduce leak and wear risks

• Disconnect power and water before starting work.
• Use appropriate hand tools; inspect mating surfaces for damage or corrosion.
• Handle edges carefully; wear gloves to avoid cuts.
• Verify correct fit and alignment before fully tightening fasteners.

This replacement drawer restores storage and access in compatible Bosch units, providing a secure bin that slides and closes smoothly so you can use the compartment as intended. It replaces a cracked, broken, or misshapen drawer. What it does:

• Replaces a damaged or worn drawer to restore proper opening, closing and storage
• Stops catching, scraping or binding caused by cracked or warped drawer walls
• Helps keep contents contained when the compartment is opened or closed
• Restores proper fit and alignment with the unit's slide/rail system

• One replacement drawer

• Disconnect power to the appliance or follow manufacturer lockout procedures before servicing
• Remove any items from the compartment and follow unit disassembly to access the drawer slides
• Handle plastic components carefully to avoid cracking; align mounting tabs before seating the drawer
• If rails or slides are damaged, replace those parts as well for proper function

This replacement drawer restores smooth storage and access in the appliance by replacing a broken, cracked, or worn drawer assembly. It provides a clean, functional compartment for holding items and letting the drawer operate properly. What it does:

• Replaces a damaged or cracked drawer to restore usable storage space
• Allows the drawer to open and close smoothly and sit securely in its track
• Helps prevent items from falling out or getting caught on damaged edges
• Addresses symptoms such as a drawer that sticks, wobbles, chips, or is visibly broken

• Disconnect power to the appliance (or follow appliance-specific safety instructions) before replacing parts
• Remove any contents and slide the old drawer out per the appliance service instructions
• Use basic hand tools as required; retain fasteners unless the part listing specifies hardware is included

A clamping piece used to secure small components or assemblies in place, keeping parts aligned and reducing vibration or movement for reliable appliance operation. What it does:

• Secures and holds a component or assembly in position
• Helps prevent rattling, misalignment, or loose connections
• Supports proper operation of adjacent moving parts
• Wear or breakage can cause noise or intermittent function

• Disconnect power and water before starting any repair
• Remove access panels or adjacent parts as needed to reach the clip
• Inspect mating surfaces and replace any damaged fasteners or retainers

The Cable Harness is an OEM part for Bosch refrigerators. As an integrated harness assembly, it routes power and communicates signals between various refrigerator modules and components. The cable harness ensures proper functioning through the controlled distribution of electrical currents. 

Causes of a bad cable harness can include severed or damaged insulation on internal wires from normal wear and flexing over time. Electrical shorts or malfunctions may also occur.

Symptoms of a bad cable harness include:

• Lights or modules intermittently failing to turn on
• Error codes indicating electrical component faults  
• Abnormal appliance noises from loose or damaged wires
• Complete appliance failure if wires are compromised

Replacing your cable harness with this OEM part restores reliable power routing to keep refrigeration operating safely and efficiently. This genuine Bosch replacement is also compatible with Thermador, Gaggenau, and select Kenmore models.

This clamping piece is a small securing element used inside the appliance to hold a component firmly in place. Replacing a cracked or missing clamp helps stop parts from shifting and keeps the assembly stable.

• Holds a mating part or subassembly securely in position
• Helps prevent vibration, rattling, or misalignment from loose components
• Direct replacement for a broken, deformed, or missing clamp
• Common signs include loose fitment or parts that won't stay secured

• Disconnect power before servicing; if working near water or gas lines, shut off the supply
• Access the area and note the original orientation
• Remove the damaged piece and install the new clamp fully until it seats securely
• Reassemble and verify the secured part is stable before returning to service

This fixture is a replacement dishwasher door bracket that secures the inner door assembly and helps keep the door aligned for smooth opening and closing. Restores proper door support and reduces sag or misalignment. What it does:

• Secures the inner door or related components to maintain proper door alignment
• Prevents door sag, binding, or uneven closing when functioning correctly
• Restores stable mounting for attached assemblies that rely on the bracket
• Helps reduce noise caused by loose or misaligned door parts

• Disconnect power (and water if applicable) before beginning any repair
• Use basic hand tools; support the door while removing/installing the bracket to prevent dropping
• Verify correct part orientation with the service manual or exploded parts diagram before final assembly

This fixture is a small mounting bracket designed to secure interior components in place and restore proper alignment. It helps stop rattling and keeps assemblies seated for reliable operation. What it does

• Secures interior panels or components to the appliance frame to prevent movement
• Stops rattling, vibration noise, or misalignment caused by a broken or missing bracket
• Restores normal fit and finish where a retaining point has failed
• Fits the original mounting location and uses existing fasteners where applicable

• One fixture

• Turn power off and disconnect the appliance before starting any work
• Inspect the surrounding area for damaged clips or fasteners and replace as needed
• Installation typically requires basic hand tools; do not overtighten fasteners

This genuine screw secures appliance panels and components to keep them tight, aligned, and rattle-free. Replace missing, stripped, or corroded hardware to restore a solid fit and reliable operation.

• Fastens panels, brackets, and internal assemblies to the chassis
• Helps maintain alignment and reduces vibration during use
• Replace if the original screw is missing, stripped, rusted, or damaged
• Common signs include loose or rattling panels and hardware that will not tighten

• Disconnect power and shut off water/gas before servicing
• Match thread and length to the original screw; replace like-for-like
• Hand-start to avoid cross-threading; tighten firmly without overtightening
• Replace screws in sets when needed to ensure even clamping and fit

The Screw Fridge is an OEM part for Bosch refrigeration units. It plays an important mounting and joining role throughout the fridge construction. 

Causes of a bad screw fridge could include corrosion from repeated exposure to moist environments inside the unit. Improper torque levels during prior installations may also cause screws to loosen or strip over time.

Symptoms of issues include: 

• Vibrations or rattling noises from unsecured components 
• Doors or shelves that are loose or misaligned
• Leaking due to compromised seals around mounted surfaces

Replacing subpar screws prevents further degradation and restores proper holding strength. Bosch quality fasteners ensure durable, rattle-free operation for the life of the appliance.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some KitchenAid refrigerator models. Reliable repairs start with genuine replacement parts.
 

This replacement glass panel restores the outer door surface and appearance while protecting internal components from spills and damage. It matches the original fit and finish for a like-for-like repair. What it does

• Replaces a cracked, chipped or shattered outer door glass to restore safety and appearance.
• Protects internal door components and the control area from moisture and debris.
• Prevents drafts and helps maintain the original seal and fit of the door assembly.
• Restores a clean, smooth exterior for proper operation of handles and hinges.

• One glass panel as shown.

• Disconnect power to the appliance and follow OEM safety guidance before starting.
• Wear cut-resistant gloves and eye protection; glass can break during removal.
• Removal typically requires supporting the door, removing trim and fasteners, and carefully separating the glass from the door frame—consider a second person for heavy or awkward doors.
• Reassemble using original fasteners and proper alignment and secure attachment before returning to service.