Parts for Bosch B36CL80ENS/01: Freezer Door & Drawer Parts

The Freezer Door Gasket is an OEM replacement part for Bosch refrigerators. As a thin, foam sealing ring located around the inside perimeter of the freezer door, it creates an airtight barrier preventing cold air leakage. The door gasket withstands temperature fluctuations from frequent openings and closings.

Causes of a bad freezer door gasket can include cracks or splits due to normal drying and usage over time, or accidental damages compromising the seal.

Symptoms of a bad freezer door gasket include: 

• Inability to maintain proper freezer temperature levels  
• Frost buildup indicating cold air leakage issues
• Higher energy bills from the refrigerator working harder
• Potential ice or frost accidentally falling upon door opening  

Replacing your worn or damaged gasket helps restore efficient cooling performance. This genuine Bosch part ensures continued reliability while preventing loss of cold air and energy costs. It is also compatible with Thermador, Gaggenau and select Kenmore units.

This fixture is a small mounting bracket used to secure internal components in place and restore proper alignment. It replaces a damaged or missing mounting point so parts stay stable during normal operation. What it does:

• Secures internal assemblies or components to the appliance cabinet or housing.
• Prevents movement, rattling, or misalignment caused by a broken or missing mount.
• Helps maintain proper clearance and positioning for connected parts.
• Commonly replaced when the original bracket is cracked, bent, or otherwise failed.

• Install with the OEM fasteners specified for your model; do not overtighten.
• Disconnect power to the appliance before accessing internal components.
• If other parts are damaged or fasteners are missing, inspect and replace as needed.

This retaining plate secures internal components in place to prevent movement and maintain proper alignment during operation. It's a small but essential mounting clip that helps reduce noise and wear when fitted correctly. What it does:

• Holds rotating or stationary assemblies in position to prevent shifting during cycles
• Helps maintain alignment of linked parts for consistent performance
• Reduces rattling and vibration caused by loose components
• Supports safe operation by keeping parts secured under normal use

• Install only on the specified mounting location; verify orientation before fastening
• Tighten fasteners to hand-tight plus a small quarter-turn; avoid overtightening to prevent damage
• Disconnect power and water before accessing internal components
• If other parts are damaged or worn, replace them as recommended to ensure proper fit and function

This retaining plate secures internal components and helps keep assemblies aligned for reliable operation. It restores proper support where a worn or broken plate lets parts shift, rattle, or bind during use. What it does:

• Holds and stabilizes a specific internal assembly or housing to prevent movement
• Keeps adjacent parts aligned to reduce rubbing, noise, or premature wear
• Restores proper fit when a cracked or bent plate no longer secures components
• Helps prevent intermittent operation caused by loose or misaligned parts

• One retaining plate

• Disconnect power and any fuel sources before beginning repairs
• Remove the required access panels to reach the old plate; keep track of fasteners
• Compare the new plate to the old part for orientation before installing
• Tighten mounting hardware securely but avoid overtightening; test operation after reassembly

This replacement guide supports and keeps a dishwasher rack properly aligned so it slides smoothly and stays on its track. It restores correct rack movement and helps prevent the rack from coming off the rollers or binding. What it does:

• Guides the dishwasher rack along its track for smooth in-and-out movement
• Keeps the rack aligned to prevent tipping or catching on the door or tub
• Helps reduce noisy or rough rack travel caused by a worn or broken guide
• Works as a direct-fit replacement when the original guide is cracked, worn, or missing

• One replacement guide

• Disconnect power and shut off water supply before starting any repair
• Basic hand tools are typically required; remove the lower rack to access the guide
• Replace like-for-like; ensure the guide snaps or fastens into the same mounting points
• If the rack still binds after installing the guide, inspect rollers and track for damage

The Drawer is an OEM replacement part for Bosch refrigerators. It provides protected storage within the refrigerator interior, with a smooth-sliding design for easy access. The drawer's frame and body are constructed of durable materials to withstand frequent use while retaining food freshness. 

Causes of a bad drawer can include normal wear over time, accidental impacts compromising the sliding function, or broken pieces inhibiting proper closure.

Symptoms of a bad drawer include: 

• Difficulty sliding in and out of the refrigerator interior
• Gaps allow cold air leakage when closed 
• Damage preventing secure latching
• Broken plastic or wooden parts

Replacing your damaged drawer maintains optimal storage and organization. This genuine Bosch replacement ensures continued reliable operation while retaining the sophistication of your appliance. It is also compatible with Thermador, Gaggenau, and select Kenmore models.

The Drawer is an OEM component specifically designed for Bosch bottom-mount refrigerators. It provides storage for fruits, vegetables, and other perishables that require precise temperature and humidity control. 

Symptoms of a bad drawer include:

• Improper sealing that allows cooler air to leak out 
• Difficulty opening or sliding smoothly
• Damage or cracks in the glass
• Issues with the crisper humidity control features

Causes of failure may include normal wear and tear of the tracks, rollers, and seals over time. Accidental damage from overloading or cleaning chemicals could also affect functionality.

Replacing the drawer with this Bosch OEM part can restore proper cooling and storage. It is compatible with many French-door and bottom-freezer refrigerator models across Bosch's residential line. This replacement drawer is also compatible with Sub-Zero and some JennAir refrigeration appliances.
 

This replacement drawer restores the dishwasher's cutlery/utensil storage and smooth slide action so you can load small items securely and maintain cleaning performance. Designed as a direct replacement drawer assembly. What it does:

• Provides a dedicated tray for silverware and small items to improve loading flexibility.
• Slides in and out smoothly to allow easy loading and unloading.
• Replaces cracked, warped, or broken drawers that no longer hold utensils securely.
• Helps prevent rattling or poor wash coverage caused by damaged or misshapen drawers.

• Turn off power to the appliance before beginning any service.
• Remove upper racks as needed for access; follow your model-specific service instructions.
• Handle edges carefully to avoid damage to the drawer or surrounding trim.
• If clips, rails, or mounting hardware appear damaged, inspect and replace those components per the manufacturer's instructions.

Replacement box that secures and protects internal components inside the appliance, restoring proper alignment and reducing noise from vibration. Fits and functions like the original part for reliable operation. What it does:

• Secures internal components and mounting points to prevent movement or rubbing.
• Restores correct alignment when the original housing is cracked, warped, or broken.
• Reduces rattles, vibration noise, and potential wear from loose parts.
• Prevents debris or moisture from reaching sensitive components when intact.

• Always disconnect power (and water supply if applicable) before starting repairs.
• Remove the appropriate access panel and save fasteners; common tools include a screwdriver or Torx driver.
• Transfer any clips, gaskets, or brackets from the old housing.
• Photograph or label connections before disconnecting to ensure correct reassembly.

This clamping piece is a small securing element used inside the appliance to hold a component firmly in place. Replacing a cracked or missing clamp helps stop parts from shifting and keeps the assembly stable.

• Holds a mating part or subassembly securely in position
• Helps prevent vibration, rattling, or misalignment from loose components
• Direct replacement for a broken, deformed, or missing clamp
• Common signs include loose fitment or parts that won't stay secured

• Disconnect power before servicing; if working near water or gas lines, shut off the supply
• Access the area and note the original orientation
• Remove the damaged piece and install the new clamp fully until it seats securely
• Reassemble and verify the secured part is stable before returning to service

This connection piece is a small inlet hose connector that links the dishwasher's supply hose to internal plumbing, maintaining a secure water connection for normal operation. It helps prevent leaks and ensures reliable water flow. What it does:

• Connects the incoming water hose to the appliance's internal inlet plumbing
• Provides a sealed junction to reduce the risk of leaks at the hose connection
• Restores proper water delivery when a damaged or worn connector causes flow issues
• Works as a direct replacement for the same OEM connection fitting

• One connection piece

• Turn off power and shut off the water supply before replacing the connector
• Inspect adjoining hoses and clamps; replace any damaged components to ensure a leak-free seal
• Tighten fittings to manufacturer torque recommendations; avoid overtightening plastic fittings

The Mounting Bracket is an OEM part for Bosch refrigerators. It secures the ice maker assembly inside the freezer compartment. As a critical component, the mounting bracket provides stable mounting and alignment for the entire ice making system.

Causes of a bad mounting bracket include cracks or breaks developing over time from normal operation, or impact damage during cleaning or shelf adjustments.

Symptoms of a faulty bracket are:

• The ice maker becoming loose or detaching from its installation point
• Ice production issues such as inconsistent cube size
• Water or frost leaks developing around the ice maker area

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement cover protects internal components and helps keep debris and moisture out of the appliance's service area. It restores the proper enclosure fit so panels and fasteners align correctly. What it does:

• Shields internal parts from dust, food particles, and moisture that can cause damage or corrosion
• Helps maintain proper airflow and prevents foreign objects from contacting moving parts
• Restores proper panel alignment and secures mounting points for nearby components
• Common symptoms: visible cracks or missing cover, rattling or vibration from loose panels, or evidence of debris intrusion

• Disconnect power (unplug or switch off breaker) before beginning any repair
• Use basic hand tools; retain all fasteners removed so original panels reattach securely
• Inspect surrounding gaskets, clips, and mounting tabs; replace if damaged to ensure secure fit

The Ice maker  is an OEM part for Bosch refrigerators. It is responsible for storing ice produced by the built-in icemaker until needed. The durable container is shaped to fit at the refrigerator door, providing accessible ice at any time.

Causes of a failing ice container can include cracks forming over multiple temperature exposures or mineral buildup affecting component alignments. 

Symptoms of a bad container include:

• Ice spilled inside refrigerator compartments when the door opened
• Inability to fully retain ice inside when accessing chilled items  
• Door-mounted container loose or improperly secured in position

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models. 

Note: Per the manufacturer, order part 00342180 to help with installation.

A small mounting plate that secures internal components so they stay properly aligned and stable during operation. Replaces a worn or broken retaining plate to reduce rattling and restore secure fitment of the assembly. What it does:

• Holds an internal assembly or component in place to prevent unwanted movement
• Helps maintain proper alignment of connected parts for correct operation
• Reduces noise and vibration caused by a loose or damaged mounting point
• Restores the original fit where a bent, cracked, or missing plate allowed play

• Disconnect power and water before beginning any repair
• Access the plate by removing the appropriate cover or panel
• Handle components gently and ensure the plate is seated and fastened securely

This guide helps keep a dishwasher rack aligned and sliding smoothly along its track for reliable loading and unloading. It replaces worn or broken guides so the rack tracks properly and reduces catching or derailment. What it does:

• Guides the rack along the track to ensure smooth in-and-out movement
• Prevents the rack from slipping off or binding on the track
• Reduces noise and wear caused by a damaged or missing guide
• Restores proper rack alignment for even loading and spray coverage

• One guide designed for dishwasher rack track installation

• Disconnect power to the appliance before beginning any repair
• Remove the affected rack to access the guide; use your model's service instructions
• Use basic hand tools and avoid forcing parts to prevent damage

This replacement door handle restores a secure grip for opening and closing your dishwasher door and keeps the exterior looking finished. It replaces a cracked, broken, loose, or missing handle so you can operate the door normally. What it does:

• Provides a secure grip for opening and closing the dishwasher door
• Replaces cracked, broken, or loose handles that are hard to grasp
• Restores the appliance's appearance where the handle is damaged
• Helps prevent further wear to the door edge from makeshift grips

• Disconnect power to the appliance before starting any repair
• Typically installs with screws or clips; retain any original fasteners unless replacements are provided
• Use basic hand tools; avoid over-tightening fasteners to prevent damage

This fixture is a small mounting bracket designed to secure interior components in place and restore proper alignment. It helps stop rattling and keeps assemblies seated for reliable operation. What it does

• Secures interior panels or components to the appliance frame to prevent movement
• Stops rattling, vibration noise, or misalignment caused by a broken or missing bracket
• Restores normal fit and finish where a retaining point has failed
• Fits the original mounting location and uses existing fasteners where applicable

• One fixture

• Turn power off and disconnect the appliance before starting any work
• Inspect the surrounding area for damaged clips or fasteners and replace as needed
• Installation typically requires basic hand tools; do not overtighten fasteners

This genuine screw secures appliance panels and components to keep them tight, aligned, and rattle-free. Replace missing, stripped, or corroded hardware to restore a solid fit and reliable operation.

• Fastens panels, brackets, and internal assemblies to the chassis
• Helps maintain alignment and reduces vibration during use
• Replace if the original screw is missing, stripped, rusted, or damaged
• Common signs include loose or rattling panels and hardware that will not tighten

• Disconnect power and shut off water/gas before servicing
• Match thread and length to the original screw; replace like-for-like
• Hand-start to avoid cross-threading; tighten firmly without overtightening
• Replace screws in sets when needed to ensure even clamping and fit

The Screw Fridge is an OEM part for Bosch refrigeration units. It plays an important mounting and joining role throughout the fridge construction. 

Causes of a bad screw fridge could include corrosion from repeated exposure to moist environments inside the unit. Improper torque levels during prior installations may also cause screws to loosen or strip over time.

Symptoms of issues include: 

• Vibrations or rattling noises from unsecured components 
• Doors or shelves that are loose or misaligned
• Leaking due to compromised seals around mounted surfaces

Replacing subpar screws prevents further degradation and restores proper holding strength. Bosch quality fasteners ensure durable, rattle-free operation for the life of the appliance.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some KitchenAid refrigerator models. Reliable repairs start with genuine replacement parts.
 

This replacement collar secures and aligns a rotating or fixed component in the appliance, restoring proper fit and helping prevent leaks, vibration, or misalignment. Use it to replace cracked, broken, or worn collars. What it does

• Centers and secures a shaft or housing to maintain proper alignment
• Helps form a seal where components meet to reduce leaks
• Reduces vibration and rubbing that can cause noise or wear
• Restores stable mounting after a cracked or damaged collar is removed

• One replacement collar

• Disconnect power and water supply before beginning any repair
• Use appropriate hand tools; avoid excessive force that can crack the new collar
• If the collar interfaces with seals or gaskets, inspect and replace those parts if damaged

This replacement container is the molded plastic tub used inside the appliance to hold or channel water and small components, restoring proper containment and helping prevent leaks or messes. What it does

• Replaces a cracked, warped, or damaged internal container that can no longer hold water or parts securely
• Restores proper containment to prevent dripping, pooling, or unwanted flow inside the appliance
• Helps eliminate related symptoms such as water puddling, intermittent leaks, or loose internal components
• Fits into the existing mounting area and works with the appliance's original seals and fasteners

• Disconnect power and water supply before accessing internal components
• Handle the part carefully to avoid cracking or scratching; use proper tools to remove fasteners
• Retain and reuse any gaskets, clips, or screws if they are undamaged and specified by the manufacturer
• Refer to the manufacturer instructions for correct placement and reassembly

This mounting bracket secures and supports internal appliance components, restoring proper alignment and stability so parts stay in place during normal operation. It's a simple replacement for damaged or missing brackets. What it does:

• Holds and secures a component or assembly to the appliance chassis
• Restores proper alignment to prevent rubbing, misalignment, or movement
• Reduces vibration and noise caused by loose or sagging parts
• Helps maintain safe, stable operation of the affected area

• Disconnect power and water before starting any repair
• Typical installation uses basic hand tools; keep fasteners from the original bracket
• Inspect adjoining parts and fasteners; replace any stripped or damaged hardware
• Compare the new bracket to the removed piece before tightening

This is a replacement refrigerator shelf that restores usable storage space and helps keep foods and containers organized. It provides a stable surface so items sit level and are easy to access. What it does:

• Replaces a cracked, chipped, warped, or missing shelf so stored items sit securely
• Restores usable shelving height and organization inside the compartment
• Helps contain small spills and keeps items from shifting during door use
• Works with existing shelf supports and rails when undamaged

• One replacement shelf

• Handle with care; edges may be sharp if damaged
• Fit onto existing shelf supports or rails; confirm shelf orientation before seating
• If glass or tempered, do not strike or drop; replace immediately if cracked
• Disconnect power only if working around interior lighting or electrical components

This fixture is a replacement dishwasher door bracket that secures the inner door assembly and helps keep the door aligned for smooth opening and closing. Restores proper door support and reduces sag or misalignment. What it does:

• Secures the inner door or related components to maintain proper door alignment
• Prevents door sag, binding, or uneven closing when functioning correctly
• Restores stable mounting for attached assemblies that rely on the bracket
• Helps reduce noise caused by loose or misaligned door parts

• Disconnect power (and water if applicable) before beginning any repair
• Use basic hand tools; support the door while removing/installing the bracket to prevent dropping
• Verify correct part orientation with the service manual or exploded parts diagram before final assembly