Parts for Kenmore 106.8592682 (1068592682, 106 8592682): Refrigerator Liner Parts

The Refrigerator Shelf Stud Kit is an OEM replacement part for Whirlpool French-door refrigerators. It includes mounting posts that secure adjustable shelves within the refrigerator compartment. It includes 1 push and turn and 1 screw-in.

Symptoms of faulty shelf studs include:

• Shelves detaching and crashing due to broken studs or mounts
• Reduced weight-bearing ability requiring replacement of shelves
• Damage presenting sharp edges risking food cuts or tears in packaging
• Indents, cracks, or damage along the stud base

Causes of a bad evaporator fan motor can include electrical issues, worn bearings due to continuous operation, or physical damage from ice buildup or foreign objects. A failing motor can lead to inadequate cooling and potential food spoilage.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Refrigerator shelf support stud.

This shelf stud secures an interior shelf or rail to the refrigerator cabinet, keeping storage surfaces level and stable. Replace a broken or missing stud to restore proper support and prevent shelves from tilting or dropping.

• Provides a mounting point for a shelf or bin rail inside the compartment
• Helps keep shelves and bins aligned and level
• Replace if the stud is cracked, stripped, loose, or missing
• Common symptoms: shelf sags, won't stay in place, or rattles

• Disconnect power; remove the shelf or bin to access the stud
• Remove the damaged stud by unscrewing or releasing its clip (design varies); hand-start the new stud and tighten snugly with a screwdriver or nut driver
• Do not overtighten to avoid damaging the liner
• The shelf sits level on all supports before reloading

Specs: 10-16 x 1/2 inch.

The Refrigerator Shelf Stud Kit is an OEM replacement part for Whirlpool French-door refrigerators. It includes mounting posts that secure adjustable shelves within the refrigerator compartment. It includes 1 push and turn and 1 screw-in.

Symptoms of faulty shelf studs include:

• Shelves detaching and crashing due to broken studs or mounts
• Reduced weight-bearing ability requiring replacement of shelves
• Damage presenting sharp edges risking food cuts or tears in packaging
• Indents, cracks, or damage along the stud base

Causes of a bad evaporator fan motor can include electrical issues, worn bearings due to continuous operation, or physical damage from ice buildup or foreign objects. A failing motor can lead to inadequate cooling and potential food spoilage.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Ice cube/utility container.

This meat pan cover is the replacement lid for an oven roaster/meat pan, helping retain juices and heat for even cooking and easier cleanup. It restores proper coverage for roasting and broiling accessories. What it does:

• Covers the meat/roaster pan to help keep heat and moisture around food for more even cooking
• Helps reduce splatter and drips inside the oven for easier clean-up
• Restores proper fit and function when the original lid is cracked, warped, or missing
• Designed for use with the matching oven roaster/meat pan accessory

• Allow oven to fully cool before handling or installing parts
• Handle carefully to avoid bending or damaging the cover; no special tools typically required
• For safety, follow your appliance owner's manual for accessory use and placement

This plastic crisper pan provides a durable, removable bin that holds fruits and vegetables and helps contain spills in the refrigerator. It restores proper storage space and keeps produce organized for easy access. What it does:

• Replaces a worn, cracked or missing crisper pan to restore the vegetable drawer area
• Holds produce and contains spills to protect the refrigerator interior
• Slides into the crisper frame or support for normal drawer operation
• Helps maintain organization and simplifies cleanup

• One plastic crisper pan

• Slide the pan into the crisper frame until it seats; it moves smoothly
• Clean with mild soap and water before first use; avoid abrasive cleaners
• Inspect crisper covers, rails and seals for damage when replacing the pan
• For safety, unplug the appliance or disconnect power before working on internal components

This part has been discontinued and is no longer available.

This air diffuser cover directs and protects airflow within the appliance, restoring proper air distribution and sealing the diffuser opening. It replaces a cracked, missing, or worn cover to help maintain consistent performance. What it does:

• Covers and protects the air diffuser/vent opening from debris and damage
• Directs airflow for consistent circulation where required by the appliance
• Helps reduce air leaks that can cause uneven temperature or performance
• Replaces damaged or missing covers that may rattle or allow debris entry

• One air diffuser cover

• Disconnect power to the appliance before beginning service
• Remove any retaining screws or clips and carefully snap or slide the old cover out
• Install the replacement by aligning tabs or screw holes and securing per the OEM fit

This replacement screw secures appliance panels, brackets, and components to the cabinet or chassis. The #8-15 x 1/2 in. size restores a snug, reliable hold when original hardware is missing, stripped, or corroded.

• Fastens panels, brackets, and trim to the appliance cabinet or chassis
• Helps reduce rattling, vibration, or looseness caused by missing/stripped hardware
• Restores proper alignment of parts that have shifted due to loose fasteners
• Size/spec: #8-15 thread, 1/2-inch length; use where this size is specified

• Disconnect power and shut off gas/water supplies before servicing
• Replace one screw at a time to maintain alignment of parts
• Start threads by hand to prevent cross-threading; do not overtighten
• Use a matching driver/bit type for the screw head used in your appliance

Color: clear. Measures about 16-3/4 X 14-1/2 inches.

The Water Reservoir is an OEM part for Whirlpool refrigerators. It stores and chills water before it is dispensed through the refrigerator's water dispenser. This component ensures that you have a steady supply of cold water available directly from your fridge.

Common causes of a bad water reservoir include cracks or leaks from regular use, exposure to extreme temperatures, or blockages from mineral deposits.

Symptoms of a bad water reservoir include:

• Water leaks inside the refrigerator
• The water dispenser not dispensing properly
• Unusual tastes or odors in the water
• Visible cracks or damage to the reservoir

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Comes with 4 nuts and 2 inserts. Instruction sheet included.

The Ice Maker Water Line is an OEM part for Whirlpool refrigerators. It supplies water from the household plumbing to the ice maker, ensuring a consistent and reliable production of ice cubes. This kit includes a 1/4-inch plastic water line that is approximately 72 inches long. The tubing will need to be cut to match the desired length.

Causes of a bad water line can include wear and tear from prolonged use, kinks or bends restricting water flow, or leaks due to punctures or cracks. A compromised water line can result in inadequate ice production or water leaks.

Symptoms of a bad ice maker water line include:

• Reduced or no ice production
• Leaking water from the refrigerator
• Visible cracks or damage to the water line
• Ice cubes that are smaller than usual

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.