Parts for Kitchenaid KSSO48FTX16: 04 - Refrigerator Liner Parts

Reduces contaminants for cleaner, better-tasting water and ice. Replace every 6 months or when indicator light activates. Verify fit by model number.

Refrigerator not cooling properly or freezing food? This temperature sensor thermistor monitors internal temps and signals the control board. DIY fix.

Replace your refrigerator's air duct if cracked, broken, or missing. This duct routes cold air between compartments to maintain proper temperature.

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

This screw support secures the dryer drum ladder assembly, helping maintain proper alignment and stable rotation for reliable drying performance. It replaces a worn or broken support to reduce noise and rattling during operation. What it does:

• Holds the ladder/support bracket in place so the drum rotates smoothly.
• Prevents excessive movement that can cause scraping, knocking, or rubbing noises.
• Restores correct positioning to reduce wear on adjacent components.
• Suitable when the original support is cracked, bent, or missing fastener points.

• One screw support (ladder) as shown.

• Intended for experienced DIYers; confirm compatibility with your model before installing.
• Disconnect power (unplug electric or shut off gas and unplug) before beginning work.
• Handle small parts carefully and keep track of fasteners; use appropriate hand tools.

This replacement screw secures appliance panels and components to restore proper fit and stop loose or rattling parts. A simple, OEM-compatible fastener that helps maintain safe, stable operation and original assembly alignment. What it does:

• Secures panels, trim, brackets or components to prevent movement and vibration
• Restores proper fit when a screw is missing or stripped
• Helps eliminate rattling, gaps, or misaligned parts
• Fits the OEM threaded holes and fastening points

• Disconnect power (and gas if applicable) before accessing internal components
• Use the correct driver to avoid stripping the head; hand-start threads before final tightening
• Do not overtighten—stop when snug to avoid damaging threads or plastic parts
• Keep removed hardware organized to ensure correct reassembly

This is a plastic cover that sits over the air diffuser inside the refrigerator compartment. It helps direct and distribute cold air evenly throughout the fresh food section from the evaporator. Replace this cover if it is cracked, broken, or missing, which can lead to uneven cooling or frost buildup in the refrigerator.

If your refrigerator isn't staying at the right temperature or runs too warm, the thermistor may have failed. This sensor monitors compartment temps.

This refrigerator door spacer maintains proper alignment and spacing between door components. Replace if cracked, worn, or missing to restore fit.

This damper assembly controls airflow between the refrigerator and freezer compartments to maintain proper temperatures. It opens and closes automatically to regulate cold air circulation based on temperature demands. Replace this part if your refrigerator or freezer isn't maintaining the correct temperature or you hear unusual airflow noises.

Fix incorrect temperature readings or freezing in your fridge. This temperature sensor helps regulate cooling. Easy 15-minute DIY repair with one screw.

Size: 8-18 x 1 1/4 inch.

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

This is a protective cover used inside the refrigerator compartment. It shields internal components from moisture, frost, or accidental contact. Replace this cover if it is cracked, warped, or missing, which can expose internal parts and potentially affect the refrigerator's performance.

Fixes warm refrigerator with cold freezer by restoring airflow between compartments. Regulates air distribution for even cooling. DIY-friendly repair.

Fix food freezing on lower shelves with this air diffuser assembly. Restores even airflow and consistent temperatures throughout your refrigerator.

Light bulb socket holds and powers the bulb inside your refrigerator. Replace if lights don't work despite new bulbs or if socket is cracked or damaged.

Illuminates appliance interior. Replace when burned out or dimming. Verify wattage and base type match your model before ordering. Easy DIY fix.

Fixes refrigerator not cooling, temperature fluctuations, or display errors. This control box regulates compressor and defrost cycles. Moderate difficulty repair.

Secures internal box components in your refrigerator. Replace if broken or missing to prevent rattling and ensure proper alignment. Confirm fit with your model.

Replacement screw for securing panels, brackets, and internal components. Replaces missing, stripped, or damaged fasteners to restore proper fit.

This user control and display board manages the electronic functions and shows status information for your appliance's advanced features. The board processes user inputs and displays settings, timers, and operational status on a digital screen. Replace this board if the display shows garbled text, buttons don't respond properly, or if certain programmed functions stop working correctly.

Replacement screw that fastens panels, brackets, and internal components. Install when original is stripped, rusted, missing, or lost during repairs.

This plastic spacer supports and aligns the meat pan in your side-by-side refrigerator. Replace if cracked, broken, or missing to restore proper drawer fit.

Plastic spacer that positions and supports the meat pan drawer in your refrigerator. Replace if cracked, broken, or missing to restore proper drawer fit.

Right hand side

Left hand side

Replace your refrigerator's crisper drawer spacer. Installs on the right side to maintain proper drawer alignment and spacing. Ideal for broken or missing spacers.

Spacer that supports crisper drawers and shelves in side-by-side refrigerators. Replace if cracked, broken, or missing to restore proper drawer alignment.

Right hand side

Left hand side

Machine screw that secures panels, brackets, and components in appliances. Replace when worn, stripped, or missing to restore tight fit and stability.