Remington Log Splitter Parts

This part is a crankcase cover. The crankcase itself is what shields the crankshaft from any dirt or debris that would damage the engine. The crankcase is a pressurization chamber for the fuel-air mixture. This part is a cover for the crankcase. It's important that this shield is intact because any dirt or debris that gets into the engine can cause the engine to fail.A new crankcase cover may be needed if the crankcase cover is dented, broken, or damaged in any way. A visual inspection is sufficient. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It is sold individually. This crankcase cover is compatible with engines, lawnmowers, tillers, log splitters, chippers, shredders, and trimmers manufactured by MTD, Yard Machines, Cub Cadet, Husky, Yard-Man, and Troy-Bilt.

This is a metal tappet that is used with many types of lawn equipment with small motors. The tappet is a component that attaches to the push rod. Tappets take the rotating motion provided by the camshaft and transfer it into linear motion so the valves operate properly. Over time, the tappet can break or become damaged and will require replacement.When replacing a tappet, users will need a set of pliers. It's best to wear work gloves during the process and make sure the spark plug wire is disconnected. Items like the mufflers, crankcase breather, and other parts will need to be removed to access the tappet. A visual inspection of the tappets can be done by removing them from the engine to check for damage. Remove the old tappet and replace it with a new part.This tappet is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The tappet is made for use with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, Yard-Man, and MTD.

This is a piston that is designed for use with several types of lawn and garden equipment. The main purpose of the piston is to seal off the pressurized combustion chamber from the crankcase. It takes the combustion power and transfers it to all of the working parts of the equipment. If the piston is going bad or has been damaged, the tool may have poor performance, the exhaust may create white smoke, or the equipment may burn oil excessively.A compression test can determine whether the pisons are malfunctioning. This involves taking a spark plug out of the engine and then starting the tool with a compression gauge attached to the cylinder where the spark plug used to be. If there is a problem with the compression, the piston will need to be replaced.This piston is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The piston is designed to be compatible with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, and MTD.

This is a piston pin that is used in many types of small engine lawn and garden equipment. The piston pin is a component that connects the connecting rod to the piston. It acts as a bearer that allows the connecting rod to pivot whenever the piston is moving. The pin is a hollow rod made of durable materials but constant wear and tear can damage the part or cause it to break.If the piston pin is broken or damaged, it will need to be replaced. A pair of pliers and an Allen wrench may be needed to complete the replacement. The process involves removing the access covers and the housing from the piston crank. The old piston ring can be removed from the connecting rod so the new component can be installed. After installation, reassemble the equipment.This piston pin is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The pin is designed to be compatible with wood chippers, log splitters, edgers, string trimmers, tillers, and lawnmowers manufactured by MTD, Craftsman, Yard Machines, and Cub Cadet.

This is a carbon canister assembly that is used to make lawn and garden equipment more ecologically friendly. When the engine is turned off, the fuel vapors from the fuel tank and carburetor are asborbed by the charcoal in the carbon canister assembly. It's part of an evaporative emission control system that captures hydrocarbon emissions.If there is a bad odor coming from the fuel, high emission levels, or pinging sounds, this could be an indication that the carbon canister assembly is failing. It can also cause weak performance from the equipment. If the carbon canister assembly isn't working properly, it will need to be replaced. Only basic tools are needed to remove the old carbon canister. The replacement component can be snapped in its place to ensure the equipment is capturing harmful emissions.This carbon canister assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. This part is designed for compatibility with lawnmowers, trimmers, wood chippers, log splitters, string trimmers, and tillers made by MTD, Cub Cadet, and Craftsman.

This cylinder head is made for use in many types of lawn and garden equipment. The cylinder head is located on top of the engine in the machinery. It is tasked with making sure the combustion chamber is sealed shut. The gap between the engine and the cylinder head will be filled using a head gasket. Another responsibility of the cylinder head is ensuring the cylinder is constantly lubricated. If the cylinder head isn't working, it may cause low oil levels, lowered engine performance, and exhaust smoke.To inspect the cylinder head, the grass shield and screen should first be removed. Remove the engine cover by taking out all of the bolts that secure it. Remove the engine shroud and the bolts that connect the head to the pump bracket. The cylinder head will be located under the valve cover. Remove it and install the replacement part before using the tool.This cylinder head is an authentic OEM replacement part sourced directly from the manufacturer. It is sold individually. The cylinder head is created to be compatible with lawnmowers, string trimmers, edgers, log splitters, and wood chippers manufactured by MTD, Cub Cadet, and Craftsman.

This is a quality replacement flywheel used in lawn and garden tools like tillers and wood chippers. The flywheel is a substantial metal wheel that is attached to the rotated shaft. The part regulates how much power is moved from the motor to the other parts of the equipment. The inertia and weight of the flywheel moderates and opposes small changes to the speed of the engine. The flywheel holds that energy in reserve until it is most needed by the machine.Over time with ordinary use, the flywheel may become cracked. One way to tell if the part is damaged is if gear slippage occurs. The location of the part and replacement process will depend upon the machine in which it is used. It should require only a screwdriver to place the new replacement component.This flywheel is compatible with tillers, log splitters, and wood chippers manufactured by MTD and Cub Cadet. It is sold as an individual part. The flywheel is a genuine OEM replacement part sourced directly from the manufacturer.

This is an engine brake cover plate that is used with many models of lawn and garden equipment. The brake plate comes in black and is made of durable materials. This protective component works with the brake system to prevent damage to other important parts of the equipment. The part is located behind the brake shoes and the wheel cylinder is mounted on it. This component also keeps dust and debris off of the brakes so cleaning will need to be done on a regular basis.The engine brake cover plate can be seen when the user pushes down on the brake pedal. This creates pressure from the hydraulic fluid located in the brake lines. Friction from normal use can cause it to wear out over time. If the damage is serious, the old engine brake cover should be removed to install a new one. Basic tools and work gloves will be needed.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The engine break cover plate is designed to be compatible with wood chippers, tillers, and log splitters manufactured by Cub Cadet and MTD.

This ignition coil assembly is a component found in log splitters and wood chippers. It allows the passage of electricity to the spark plug. In law and garden equipment, electricity creates a spark in the spark plug which then ignites fuel in the motor, providing power to the machine. If the ignition coil is damaged or broken, the tool will not start since the spark plug will have no power.If the ignition coil assembly may not be working, there is a test that can be performed. Take the spark plug wire off and then remove the spark plug itself. Next, remove the recoil starter and search for the kill switch. It will need to be disconnected before the part is replaced. Create the spark plug gap and add the boot to the top. Yank on the pull rope and watch the plug. If a spark isn't seen, the ignition coil assembly should be replaced.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It's sold as an individual part. The ignition coil assembly is compatible with log splitters and wood chippers manufactured by Cub Cadet and MTD.

This is an ignition switch that is often used on lawn and garden equipment. It acts as a safety feature that prevents using equipment or machinery without pressing a button to turn it on. Ignition switches have many mechanical internal parts, and they can fail over time and will need to be replaced. This ignition switch is made using durable plastic.If the ignition switch is damaged, a visual inspection may show cracks, breakages, or excessive scratches. The switch may also have problems with the internal parts, which may which may stop equipment from starting when the button is pressed to the on position. If this is the case, it will need to be replaced. This may require a basic set of tools. Before starting the replacement process, make sure the equipment is on a sturdy surface and the spark plug wire has been disconnected.This is a genuine OEM replacement component sourced directly from the manufacturer. It is available as an individual part. The ignition switch can be used in wood chippers and log splitters manufactured by MTD and Cub Cadet.

This is a choke control replacement part that is used in lawn and garden equipment. It is an attachment to the throttle box. The choke control helps ensure the choke lever is actuated so the carburetor can take advantage of a richer ratio of air and fuel when the motor is started. It is made of durable plastic and metal.If the choke control has become damaged or broken, either through frequent use or impact with other items, it will need to be replaced. A screwdriver may be needed for the replacement. The equipment should be placed on a stable surface with the spark plug wire disconnected. The top cover can be removed before taking out the recoil assembly. Once that is complete, the existing choke control can be removed using the screwdriver. Replace the part and reinstall the other components before use.This choke control is a genuine OEM product sourced directly from the manufacturer. It is sold as an individual component. The part is designed to be used in wood chippers and log splitters manufactured by MTD and Cub Cadet.

This genuine Midwest Engine valve cover can be used as a replacement part for the small engines of outdoor appliances such as lawn tractors, lawn tractors, snowblowers, wood chippers, leaf blowers, tillers, and edgers. The function of a valve cover is to prevent dirt and debris from entering the infrastructure of the engine as well as to prevent engine oil from leaking. The valve cover of a small engine outdoor appliance might have to be replaced if it suffers damage that results in oil leakages or accumulation of dirt and debris in the engine. Symptoms of damage to the valve cover can include oil leaking from the valve cover or the surrounding area, consistently low oil levels even after refilling, engine misfires, or oil dripping into the exhaust and emitting a burning smell. Before more severe damage occurs, it is best to remove and replace the damaged valve cover. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This valve cover is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Simplicity, Lawn-Boy, MTD, Craftsman, and Cub Cadet. This part is sold individually.

This genuine MTD carburetor kit in a log splitter or a chipper shredder is the component responsible for mixing the air and fuel intake into a proper ratio in order to ignite the spark plugs through its network of valves. This OEM carburetor kit contains the carburetor itself and the primer bu.The carburetor kit might have to be ordered as a complete replacement if the carburetor is not functioning properly and its malfunction cannot be attributed to a smaller component, such as the cylinder head gasket or the carburetor gasket. The log splitter or chipper shredder cannot be used again until the malfunctioning carburetor and its components have been replaced by a new carburetor kit. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This carburetor kit is compatible with the following brands: MTD and Cub Cadet. This part is sold individually.

This genuine MTD short block can be used as a replacement part for the small engine of a log splitter or a chipper shredder. The short block in a log splitter or a chipper shredder is the bottom half of the small engine which contains the crankshaft, cam pistons, connecting rods, gaskets, and cylinder head gaskets. This short block can be ordered as a replacement engine for a log splitter or chipper shredder.The short block of a log splitter or chipper shredder might have to be ordered as a replacement for the small engine if the engine is no longer working properly and its state of disrepair cannot be fixed by tweaking or replacing singular components of the engine. The engine can be easily replaced by this OEM short block. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This short block is compatible with the following brands: MTD and Cub Cadet. This part is sold individually.

This genuine MTD engine powers up, operates, and drives the log splitter by filtering fuel and air into the carburetor and igniting the spark plugs, thereby turning on and maintaining the power of the engine.The complete engine of a small engine outdoor appliance might have to be replaced if it suffers deterioration or damage to the point that it stalls, hiccups, or no longer turns on properly. Signs of a malfunctioning or broken complete engine can include heavy vibration or shaking from the equipment, black or white smoke pluming from the exhaust pipe, or particularly rough riding and bad traction from the log splitter. If any of these issues cannot be resolved by fixing an individual component within or outside of the log splitter engine, the complete engine can be replaced with this OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This complete engine is compatible with the following brands: Midwest Engine, Briggs & Stratton, Cub Cadet, Snapper, and Yard-Man. This part is sold individually.