Remington Log Splitter Parts

This oil fill plug is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by MTD. An oil fill plug keeps the oil where it is supposed to be in the machine. It is designed for use with snowblowers, tillers, leaf blowers, wood chippers, and log splitters. It is compatible with products from brands such as Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, and MTD.The oil fill plug is crucial in preventing oil from leaking as well as clearing the path upon removal for any needed oil changes. It is removed when the oil needs to be drained. The replacement or repair process of the oil fill plug should be straightforward, though it may be helpful if the owner or operator uses a socket wrench to aid in the replacement process. The user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This is a governor arm shaft found on lawnmowers, chippers, and other engines on lawn and garden equipment. It is a component of the governor assembly maintains a steady speed regardless of how much stress is placed on the engine. The governor arm is connected to the carburetor arm shaft. One end of this arm is connected to the governor spring and the other to the throttle linkage. Speed is increased or decreased based on the amount of push or pull that is placed on the throttle arm. If the governor arm shaft is bent, broken, or damaged, the governor arm will not be able to maintain its speed. The engine may appear to be stuck in high speed or it won't accelerate at all.Remove the carburetor to access the governor assembly. Disconnect the governor spring and take the linkage off the governor arm. Remove the governor arm from the arm shaft and then remove the broken governor arm shaft. Install the new shaft and reassemble the governor. Reinstall the carburetor. The governor arm shaft is made from heavy-duty metal and is sold as an individual unit. It is compatible with snowblowers, lawnmowers, chippers, and other small engines manufactured by MTD, Craftsman, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, and Husky.

This is a genuine OEM primer hose replacement part sourced directly from the manufacturer. It is used on tillers and other outdoor power equipment with a primer bulb assembly. The hose is the part of the assembly that runs from the fuel tank to the carburetor. When the primer bulb is pressed, fuel is collected from the tank and pushed into the carburetor to start the engine. Any unused fuel is released back into the fuel tank. If the primer hose has cracks or holes in it, the vacuum inside the hose will be lost and the primer bulb will not force the fuel to the carburetor. These cracks or holes can occur over time due to fuel eroding the hose material. If the primer bulb is not working and fuel cannot be seen in the tube, the primer hose should be inspected and replaced if necessary.Before replacing a primer hose, empty the fuel from the fuel tank and fuel lines into a clean container. Remove the spark plug. Remove and replace the primer hose. After refueling, check the primer bulb to ensure the primer hose is pulling fuel. This primer hose is clear plastic material; it is sold as an individual unit. This hose is compatible with tillers, chippers, shredders, and other small engines manufactured by Cub Cadet, MTD, and Yard Machines.

A carbon canister filter cap is an essential piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers, tillers, wood chippers, string trimmers, log splitters, and edgers. It is compatible with products by brands such as Craftsman, Cub Cadet, and MTD. This carbon canister filter cap is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. The purpose of the carbon canister filter cap is to prevent harmful fumes or chemicals from entering the environment.The replacement or repair process of the carbon canister filter cap should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This muffler guard is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. A muffler guard is an important part designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a tiller and a log splitter. It is compatible with products by brands such as MTD, Cub Cadet, Yard Machines, and Troy-Bilt.The muffler guard part is crucial to the proper operation of equipment with small engines. The primary purpose of the muffler guard is to quiet or muffle the volume of the noise coming from the exhaust of the engine and to guard the muffler. The replacement or repair process of the muffler guard should be straightforward, but always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

Engines, even small engines, get quite hot. Muffler shields like this one are used on small engines, like those found in log splitters, to help protect from this heat. Without a muffler shield, the engine could cause burning, which can be dangerous. If there is an issue with the heat shield, owners will want to replace it as soon as possible.Although muffler heat shields are made from metal and are meant to be durable, they could still need to be replaced eventually. They could crack or bend, or they could become corroded over time. Regardless, if there is a problem with the muffler shield, it should be replaced. Wait until the machine is cool before making any repairs.This muffler shield works with many models of small engines from manufacturers MTD, Craftsman, Columbia, Yard Machines, Cub Cadet, and Troy-Bilt. The shield is sold individually and is a genuine OEM part sourced from the manufacturer.

Pistons are essential for proper engine function. When expanding gases push the piston, it turns the crankshaft. When the piston compressed the fuel-air mixture, the spark ignites and causes combustion. If the pistons are going bad, owners might notice white or gray exhaust smoke, low power when accelerating, loss of performance, or excessive oil consumption.Pistons may need to be replaced for any number of reasons. They could have damage to their crown, which could be caused by overheating. There could be impaction marks if they were not installed correctly or if the valve timing is incorrect. The pistons could be fused or have elements that have melted, or there could be cracks in the piston. Any of these issues would necessitate a replacement.This piston is used for select small engines from MTD, Troy-Bilt, Yard Machines, Columbia, and Cub Cadet. Each piston is sold individually and is a genuine OEM part sourced from the manufacturer. Those who need to replace more than one piston will need to buy them separately.

The flywheel is an engine component that attaches to a rotating shaft which helps to provide smooth power delivery from the motor to the machine. Some of the signs of a bad flywheel include strange noises when the motor starts, grabbing when the clutch engages, vibrations, and a burning smell.The flywheel is made from durable metal, but it could still need to be replaced in time. It could be damaged from debris, or it could simply be worn out from use over the years. If there is an issue with the flywheel, it should be replaced it before it causes more problems with their engines and the capabilities of their machines.This flywheel is for use with certain engine models from MTD, Troy-Bilt, Yard Machines, Craftsman, Columbia, and Cub Cadet. Each of the flywheels is made from quality materials and is sold individually. It is a genuine OEM replacement part sourced from the manufacturer.

This breather cover plate replaces worn-out, damaged, or misplaced cover plates to ensure the outdoor power equipment runs as smoothly as possible.Breathers are essential for internal combustion engines, as they let gases escape from the combustion chamber. If gases cannot properly vent, pressure within the engine will build which can lead to ruptured seals. Eventually, this can cause oil to spill into the combustion chamber and is very problematic for the engine. Without a breather cover plate, the breather cannot function properly. This part should be replaced whenever it is worn out or shows signs of deterioration. This breather cover plate is a genuine MTD replacement part and has been sourced directly from the manufacturer. This replacement breather cover plate fits various different models of MTD, Cub Cadet, Yardman, and Troy-Bilt outdoor power equipment such as lawn mowers, log splitters, and trimmers. Please note this cover plate is sold individually.

This breather gasket easily replaces old, worn-out gaskets to ensure the utmost efficiency of relevant outdoor power equipment.A worn out or deteriorated breather gasket can cause a number of issues such as high-idling and oil leaks. As breather gaskets age, they will need to be replaced. Breathers need to function properly, as they are critical for relieving engine pressure and reducing buildup of harmful materials within the engine. This breather gasket is a genuine OEM replacement part and has been sourced directly from the manufacturer. This replacement breather gasket fits various different models of MTD, Cub Cadet, Yardman, Husky, and Troy-Bilt outdoor power equipment such as lawn mowers and trimmers. Please note this breather gasket is sold individually.

This governor arm assembly can be used as a replacement part for hedge trimmers, string trimmers, lawnmowers, or chipper shredders. The governor arm assembly is a connecting part within the governor system; it contains the governor arm and the components that fasten the governor arm to the governor spring and the throttle linkage.Governor arms can be subject to damage in the form of erosion, piercing, puncturing, or general wear and tear. Damage to a governor arm can affect the functionality of the entire governor system, which could render equipment nonfunctional. If the governor arm or its fastener parts are damaged, a governor arm assembly should be ordered, and the damaged or broken parts should be removed. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This governor arm assembly is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

This component bracket can be used as a replacement part for lawnmowers, lawn trimmers, chipper shredders, edgers, tillers, leaf blowers, snowblowers, or log splitters. The component bracket for one of these small engine appliances is responsible for attaching other components to one another, clamping those components in place, and orienting those components in the proper direction such that the engine can operate smoothly.When damaged, component brackets can loosen or disorient the components they are attaching together. This damage can come in the form of cracks, tears, punctures, piercings, or erosion of the metal material. If the component bracket suffers enough damage that it can no longer hold parts in place, it should be removed and replaced with this genuine OEM replacement part before the small engine appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This component bracket is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

This governor arm shaft can be used as a replacement part for hedge trimmers, string trimmers, lawnmowers, or chipper shredders. The governor arm shaft for one of these small engine appliances is a connecting part within the governor system; it is fastened to the governor cross shaft and is attached to the throttle linkage and the governor spring. Governor arm shafts can be subject to damage in the form of erosion, piercing, puncturing, or general wear and tear. Damage to a governor arm shaft can affect all of the surrounding components. As such, if a governor arm shaft suffers damage such that it cannot fasten components together, it must be removed and replaced immediately before the small engine appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This governor arm shaft is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.