Roper Dishwasher Parts

Oven light switch.

This tower protector is a small plastic cover that fits over the dishwasher's spray tower. It helps keep dishes and utensils from obstructing the tower's spray outlets so water can circulate properly for consistent cleaning.

• Shields the spray tower to prevent items from blocking water flow
• Helps maintain proper spray pressure and coverage to upper areas
• Replaces cracked, melted, or missing protectors that can lead to poor cleaning
• Common signs it's needed: protector is broken/loose, deformed, or repeatedly falls off; dishes aren't getting clean due to blocked spray

• Disconnect power and water before service
• Allow the dishwasher interior to cool
• Open the door, remove the lower rack, and snap the protector into place per the tower/rack design
• Verify it seats securely and does not interfere with the spray tower movement

Replace aging or leaking washer supply lines with this fill hose kit. It provides two 5-foot hoses to connect your home's hot and cold water valves to the washer, helping maintain a secure connection and consistent filling.

• Connects hot and cold water faucets to the washer's inlet valves
• Replace if hoses are leaking, cracked, bulging, or kinked
• Can help address slow filling caused by restricted or kinked hoses
• Useful when installing or relocating a washer

• Unplug the washer and shut off both water supply valves before starting
• Place a towel or pan to catch residual water; disconnect old hoses from faucet and washer
• Match hot to hot and cold to cold; hand-start threads to avoid cross-threading, then tighten firmly without overtightening
• Restore water and power; run a fill test and check all connections for leaks

This fill hose carries water from the home supply to the appliance inlet valve, restoring proper water fill and helping prevent leaks when the original hose is cracked, worn, or blocked. Ideal for replacing damaged inlet lines. What it does:

• Delivers water from the household supply to the appliance inlet valve for normal fill cycles.
• Replaces cracked, split, or deteriorated hoses that can cause leaks at connections.
• Resolves symptoms such as slow or no water fill, visible leaks, or intermittent filling.
• Durable replacement designed to match OEM routing and connection points.

• Always shut off water supply and disconnect power before starting work.
• Inspect and replace hose clamps or inlet gaskets as needed; ensure proper seating to prevent leaks.
• Hand-tighten fittings and secure clamps—avoid overtightening metal fittings.
• After installation, restore water and power and run a short fill cycle while checking for leaks.

This wet agent dispenser replaces the washer's liquid fabric softener dispenser to restore proper dispensing during the rinse cycle. It helps keep softener contained until the machine is ready to release it, improving rinse-time performance. What it does:

• Holds and releases liquid fabric softener (wet agent) into the rinse cycle
• Ensures softener is delivered at the correct time for even distribution
• Stops leaking or premature release when the dispenser housing is intact
• Commonly replaced when the dispenser cracks, clogs, or fails to dispense

• Disconnect power to the appliance before starting any repairs
• Access method varies by model; remove dispenser drawer or top panel per your model's service instructions
• Inspect surrounding seals and clips; replace if damaged to prevent leaks

Touch-up paint for repairing small chips, scratches and scuffs on painted appliance surfaces. Restores the appearance of localized damage so repaired areas better blend with the surrounding finish. What it does:

• Covers small chips and surface scratches to improve cosmetic appearance.
• Helps conceal finish wear on painted metal and plastic trim.
• Lets you spot-repair without replacing large panels or parts.
• Works for quick, visible fixes where full repainting isn't needed.

• Clean and dry the repair area thoroughly before applying; remove loose paint or rust.
• Test on an inconspicuous area first to confirm color match and compatibility.
• Apply sparingly in thin coats with a small brush or cotton swab; allow each coat to dry before adding more.
• Use in a well-ventilated area and keep out of reach of children; follow any handling instructions on the product label.

5 foot. Package of 2.

This touch-up paint restores small chips, scratches and nicks in painted appliance surfaces for a cleaner, like-new appearance. It's ideal for hiding minor cosmetic damage without repainting the whole panel. What it does:

• Covers small chips, scratches and scuffs on painted appliance surfaces
• Helps prevent bare metal exposure that can lead to rusting of small areas
• Restores color and gloss to localized damage for improved appearance
• Applies to control panels, doors and trim where finish is worn

• Shake well before use and apply sparingly with a fine brush, cotton swab or toothpick
• Allow finish to dry fully between light coats for best color match
• Work in a well-ventilated area and avoid inhaling fumes
• Keep out of reach of children and follow local disposal regulations for paint

Float that detects and communicates water level to the appliance control so the washer or dishwasher can fill and drain properly. Replaces a cracked, stuck, or worn float to restore reliable water sensing. What it does:

• Senses water level and relays position to the machine's control system.
• Helps prevent overfilling or unintended continuous filling when working correctly.
• Can resolve symptoms such as flooding, constant filling, no fill, or improper drain cycles.
• Works with the appliance's existing valve and switch components to re-establish normal fill/drain operation.

• Disconnect power (and water supply where applicable) before beginning service.
• Remove outer panels or tub shroud to access the float; use basic hand tools.
• Handle clips and fittings gently; do not force plastic tabs or connectors during removal/installation.
• After installation, restore power and run a test cycle to ensure correct fill and drain behavior.

This drain impeller spins inside the drain pump to move wastewater out of the appliance, restoring normal draining and reducing standing water. It's a direct-replacement pump impeller designed to fit the original pump housing. What it does:

• Drives water through the drain pump so the washer can empty properly
• Worn or broken impellers can cause slow or no draining and standing water
• May produce unusual pump noise or vibration when damaged
• Helps prevent motor overload by maintaining proper water flow

• One drain impeller

• Disconnect power before accessing the pump assembly to avoid electric shock
• Inspect the pump housing and fasteners; replace any damaged clips or seals as needed
• Reassemble pump and test a short drain cycle before completing the repair

This black timer knob replaces a worn, cracked, or missing control knob so you can easily set the oven or range timer. Restores a positive grip and clear pointer for accurate timer adjustments. What it does:

• Fits onto the timer/control shaft to allow manual setting of the cook/timer function
• Replaces broken or stripped knobs that spin or won't engage the control
• Provides a visible pointer for precise timing and repeatable settings
• Improves user grip and control when turning the timer dial

• One black timer knob

• Power off the appliance before servicing electrical controls
• Pull the old knob straight off the shaft; align and push the new knob onto the splined shaft until fully seated
• Do not force the knob onto the shaft; verify correct spline alignment to avoid damage
• If the knob does not seat or the control shaft is damaged, inspect the control assembly and replace as needed

This silverware basket is a dishwasher utensil caddy that organizes forks, knives and spoons so cutlery cleans evenly and stays contained during the wash cycle. It fits into the lower rack and helps prevent items from shifting. What it does:

• Holds and separates silverware and small utensils for better cleaning and safer handling
• Keeps loose items from falling into the wash area or blocking the spray arms
• Snaps into the lower dishwasher rack to stay secure during cycles
• Works with standard dishwasher racks that accept a removable utensil caddy

• One silverware basket

• Place the basket into the lower rack and align so it sits securely in the rack slots
• No tools required for standard installation; handle with care to avoid sharp utensils
• Inspect for broken tabs or clips before installing; damaged mounting points can allow the basket to shift
• Clean periodically to remove food buildup and prevent odors

Color: White. Size: 13 oz. Spray paint primer. can.

This spring kit replaces worn or broken return springs in the applicable assembly, restoring proper tension and smooth movement so the mechanism operates reliably throughout the cycle and returns to its proper position. What it does:

• Provides the correct tension to move or hold parts in place
• Helps resolve weak return action, sticking, failure to engage/latch, or sagging components
• Can reduce noise caused by loose or fatigued springs
• Maintains consistent operation throughout the appliance's cycle

• Manufacturer-supplied spring kit

• Disconnect power; turn off water supply if applicable
• Springs are under tension—use eye protection and release carefully
• Note original spring routing and attachment points before removal
• Replace both for balanced operation

Kit contains two 10 feet inlet hoses.