Roper Washer Switch

This adjustable buzzer kit replaces a failed or noisy mini buzzer to restore audible alerts for cycles, timers and notifications. Compact design lets the appliance signal you reliably when cycles finish or need attention. What it does:

• Produces audible tones for cycle end, timers and other appliance notifications
• Replaces buzzers that are silent, intermittent, weak or emitting erratic beeps
• Helps you hear and identify completed cycles and timed alerts
• Small, mountable unit that fits behind the control panel and connects to the control board

• One adjustable buzzer kit

• Disconnect power before servicing to avoid shock risk
• Access may require removing the control panel; keep fasteners organized for reassembly
• Disconnect the buzzer wiring harness or connector before removing the old unit; connect the new buzzer the same way
• Test buzzer function with power restored before fully reassembling

2 position. Extra rinse.

Color: Black. Instruction sheet included.

This water level pressure switch monitors the tub's water level via an air hose and signals the washer when to stop filling and move to the next step. Replacing a failed switch restores accurate fills and reliable cycle operation.

• Senses tub water level through air pressure and communicates with the timer/control
• Shuts off inlet valves at the correct level to help prevent overfilling
• Allows the cycle to advance to wash, drain, and spin based on sensed level
• Common symptoms: overfilling/overflow, underfilling or no fill, cycle stuck at fill/sensing, no agitate or spin

• Disconnect power and turn off water supply before servicing
• Access the control console to remove the old switch; note wire locations for correct transfer
• Move the air hose to the new switch and ensure the hose is clear, undamaged, and snug at both ends
• Reassemble and run a test fill to verify proper shutoff and cycle progression

This water level pressure switch senses the washer tub's water height and signals the control to stop filling. Replaces a failed level sensor to help restore proper fill control and prevent incorrect water amounts. What it does:

• Monitors air pressure from the tub to detect water level and tells the control when to stop or continue filling
• Can cause symptoms such as incorrect fill levels, overfilling, underfilling, or interrupted cycles when faulty
• Works with the washer's control system to ensure cycles progress only when the correct water level is reached
• Requires checking the air hose and connections when diagnosing related issues

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Shut off the water supply and remove the necessary access panels to reach the switch
• Handle the switch and wiring carefully; note connector positions and routing of the air hose for correct reinstallation
• After installation, run a short test cycle and inspect the air hose for secure, leak-free connections

This pushbutton switch restores a single button on the appliance control panel so you can reliably send selection or command inputs to the control board. It replaces a worn, stuck or non-responsive panel button. What it does

• Acts as the user-facing pushbutton that completes the control input circuit when pressed
• Sends selection/command signals to the appliance control board or timer
• Common symptom fixer: button that won't register presses or responds intermittently
• Also used when a button is physically stuck, loose, or missing

• Disconnect power to the appliance before beginning service to avoid shock
• Access typically requires removing the control panel or overlay—retain screws and trim
• Verify connector orientation and seating; do not force connectors or terminals