Samsung DA63-02183A Refrigerator Sensor Cover OEM Part

Samsung refrrigerator. it started when the setting was on cubes but was putting out crushed ice. then months later the water refill was running down into the ice bucket causing a massive block of ice in the bucket. look closely at the first two or three cubes in the ice tray after they unload. mine were not dumping and staying in the tray. when the water refill kicked on it would overfill the tray (because of the leftover cubes remaining in the tray) and would run down into the ice bucket and the problem would repeat itself over and over. the new flex tray from appliance parts was the fix. the old one had lost some of its flex and was not letting go of those first three cubes causing the problem. installed new tray and now have nice full cubes in my ice tea. the parts arrived in TWO days!! thanks APP

Found video by appliancepartspros.com ordered part, checked out to see who had best price on part which appliancepartspros.com did, was very easy to repair by video and took care of my problem thought I needed to replace ice maker with your help got it repaired

My 3 yr old ice maker had two pieces fall out (clear plastic clip & white foam piece) and the white wire with with a sensor attached to it is hanging down about 6 inches. I ordered and replaced the plastic clip so the sensor & foam piece is firmly attached to the ice cube tray. This clip has broken a few times (probably from the sliding drawer in the freezer yanking on the sensor wire.) I did a search and found the following step by step tutorial on how to fix it). I ordered 3 clips so I have a few extras next time it breaks. This tutorial helped me diagnose & fix the problem. Saved me a bundle not having to call a repairman. http://www.how-to-diy.org/oQxozFiXGPUMlo/How-to-Fix-a-Samsung-Refrigerator-Ice-Maker-Large-ice-chunks-not-breaking-apart-(Read-description).html

Took the ice maker out inserted the loose sensor into the sensor bracket then put the senor bracket cover on and place the assembly into the ice maker. You can find youtube videos as to the process. I found it much easier to remove the ice maker to get the parts into their correct places. Now ice is in production as it should be all loose.

Replaced missing parts that positioned sensor underneath ice cube tray. These two parts had fallen into ice maker a while back and I discarded them thinking it was packing material.