Samsung DD62-00055A Dishwasher Rubber Seal Scroll OEM Part

While waiting for a replacement PCB, I cleaned the filter and soaked up the remaining water in the tub (dishwasher died mid-cycle) which entailed removing the dishwasher mesh filter and cover assembly of the pump assembly. The filter seal in the cover assembly and seal in the case scroll popped out. These two gaskets (seals) somehow had stretched and were very difficult to keep in their tracks while reassembling the pump assembly after cleaning. Replacement gaskets fit much better than the originals. I sprayed both gaskets with silicone lubricant (safe for rubber) before installing as they were powdery and possibly a bit dry.

After removing the heater went to local appliance repair shop only because wife loves the sanitize feature and uses it for the baby bottles so didn't want to wait. A problem came about when I started putting it back together. The original gaskets were stretched and were unusable. Parts store didnt have them and was going to take 7 to 10 days to get them in. I found wht needed on AppliancePartsPros.com I had the parts with in 2 days and was back up and running that day.

Replaced seals Dishwasher was not cleaning well, took t apart to clean and needed new seals to put back together. Quick and easy job. Parts came in fast and were just what I needed

Removed rack and disassembled filter screen and upper pump cover. Cleaned all parts, installed new gaskets and reassembled.

Replaced the Seal-Duct Nozzle, and the 2 drain gaskets