Parts for Ge GSCS3PGXCFSS: 08 - Sealed System & Mother Board Parts

This small roller wheel attaches to the underside of the pan cover or drawer cover inside the refrigerator, allowing it to slide smoothly in and out. It supports the weight of the cover panel that sits above the crisper or deli drawers. Replace this wheel if your drawer cover is difficult to slide, sits unevenly, or if the original wheel is cracked or missing.

The Screw is an OEM part for GE refrigerators. It serves a crucial function in securing and allowing smooth operation of the refrigerator's drawer rollers.

Causes of a bad or missing screw can include accidental loss during repair or maintenance, stripping of the screw threads due to overtightening, or general wear and tear over time.

Symptoms of a loose or screw include:

• Loose or wobbly refrigerator drawer
• Difficulty opening or closing the drawer smoothly
• Scraping or grinding noises when operating the drawer
• Drawer coming off the track or rollers entirely

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a middle drawer assembly that slides into the refrigerator compartment, typically used as a deli or snack drawer between the main shelves and the crisper bins. It provides a convenient storage space for meats, cheeses, and other items. Replace this drawer if it is cracked, warped, or if the slides no longer allow it to open and close properly.

Replacement glass insert for refrigerator crisper pan cover. Restores the flat shelf surface above drawers. Replace if cracked, broken, or shattered.

Plastic cover that sits over the crisper drawer in your refrigerator. Replace if cracked, broken, or missing to protect produce and maintain humidity.

The Humidity Control is an OEM part for GE refrigerators. This component regulates the humidity levels within the crisper drawers, ensuring optimal conditions for preserving the freshness and longevity of fruits and vegetables. By controlling the humidity, it helps to prevent produce from drying out or becoming too moist.

Causes of a bad humidity control can include mechanical failure, damage from spills or impacts, and wear and tear over time. Additionally, issues with the connecting cables or electronic controls can also lead to malfunction.

Symptoms of a bad humidity control include:

• Produce spoiling faster than usual
• Visible condensation or dryness in the crisper drawers
• Difficulty adjusting the humidity settings
• The humidity control lever or switch not functioning properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Pan Cover Gasket is an OEM part for GE refrigerators. This gasket provides a tight seal between the pan cover and the refrigerator compartment, helping to maintain proper humidity levels and temperature for the stored food. It is essential for preserving the freshness of fruits, vegetables, and other perishable items.

Causes of a bad pan cover gasket can include regular wear and tear, exposure to food spills, and improper cleaning methods. When the gasket becomes damaged or worn out, it can lead to air leaks, causing the refrigerator to work harder to maintain the correct temperature.

Symptoms of a bad pan cover gasket include:

• Moisture buildup inside the refrigerator
• Reduced freshness of stored produce
• The gasket showing visible signs of wear or damage
• The refrigerator running more frequently

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Seals the back edge of your refrigerator's crisper cover to maintain proper humidity and airflow. Replace if worn, cracked, or causing gaps. Confirm fit by model.

Replacement humidity control slide for refrigerator crisper drawers. Installs in produce compartment to adjust moisture levels. Needed when original is broken, cracked, or missing.

Replacement top pan cover assembly for your refrigerator. Installs over the top pan area to provide a clean finished look. Replaces cracked or missing covers.

This drawer cover forms the shelf surface above your refrigerator crisper. Installs as a flat, supportive lid over the drawer compartment. Replace when cracked, bowed, or missing.

Replace your refrigerator's pan cover gasket to restore proper sealing and prevent air leaks. Slides into track on frame for easy installation. Verify fit with your model number before ordering.

This cover pan assembly replaces the evaporator drain area to catch and channel defrost water away from the evaporator and into the drain system, helping reduce leaks and ice buildup in the freezer compartment. What it does:

• Covers the evaporator area and collects defrost water for proper drainage
• Channels water to the drain to prevent pooling and potential refreezing
• Protects internal components from moisture and helps maintain normal defrost operation
• Commonly used when you see water pooling, ice buildup around the evaporator, or slow drainage

• Disconnect power to the appliance before starting work to avoid shock or damage
• Handle with care to avoid damaging the evaporator fins or nearby wiring; inspect and clear the drain tube before reassembly
• If gasket clips or mounting hardware are missing or damaged, replace them separately

Pan frame assembly covers the refrigerator storage drawer and supports the glass shelf above. Replace if cracked, warped, or broken to restore alignment.

Replace your refrigerator's chill drawer gasket to restore a tight seal and maintain proper temperature. Fixes worn or compressed seals causing moisture issues.

Seals the chill compartment to maintain proper temperature and prevent frost buildup. Replace if worn, torn, or hardened. Confirm fit with your model.

Replacement shelf slideout assembly for refrigerators. Restores smooth sliding action for shelves. Needed when slide rails are cracked, worn, or binding.

Plastic shelf stop locks refrigerator shelves into liner slots. Replace if cracked, broken, missing, or lost during cleaning to secure shelves properly.

Folding glass shelf assembly for refrigerator. Replaces cracked, broken, or missing tuckaway shelf that slides to create extra height for tall items.

Restores smooth drawer movement in your refrigerator. Replaces worn, broken, or damaged slide and bracket assembly. Installs to support drawer glide.

Replaces worn or broken refrigerator drawer slide assembly. Restores smooth gliding and secure support for drawers that sag, bind, or no longer align properly.

Drawer slide liner provides smooth, low-friction glide for refrigerator drawers. Replace if cracked, worn, or causing drawer to stick or catch on track.

Plastic spacer that positions and aligns refrigerator door components. Replace if cracked, broken, or missing to restore proper door fit and alignment.

Hex washer head screw for refrigerator component mounting. Replaces missing, stripped, or damaged fasteners on brackets, panels, and covers.