Dishwasher Cap Handle Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 154574401
Dispenser door won't close or latch? Replace the detergent dispenser assembly. DIY repair takes 5-10 minutes with video guide. Fixes stuck or broken latch.
This part fixes the following symptoms
-
Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You
Dishwasher soap dispenser door would not open during cycle Brian L. • Hammonton , NJ • January 11, 2015
I bought a replacement part and changed it out.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD16X297
Dispenser won't close or stay shut? This dishwasher detergent cup cover securely latches to prevent mid-cycle opening. Moderate DIY repair, 1 hour.
Do-It-Yourself Stories from Customers like You
Cover detergent cup would not close or stay closed Michael G. • Wareham , MA • October 01, 2019
Although I ordered the latch, lever and a new cup and replace the original pieces the dispenser still did not close. On further inspection it turned out to be a small spring that had fallen out of place. Once the spring was reconnected the dispensing cover worked fine. I'm still happy that I replaced the entire assembly with new parts regardless. Discovering the loose spring took the most time.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD12X24637
Detergent not dispensing or dishwasher door won't close? This dispenser module releases detergent at the right time. Moderate DIY repair difficulty.
Do-It-Yourself Stories from Customers like You
Replace broken detergent module on a 6 month old GE dishwasher Timothy A. • Akron , IA • September 29, 2020
Watched you tube video, fixed with no problem.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8193830
Fix a dishwasher door that pops open during the wash cycle or won't stay closed. This latch secures the door and maintains proper sealing. DIY repair.
Do-It-Yourself Stories from Customers like You
Door kept un latching during wash cycle Rolland W. • Hilton Head , SC • March 04, 2015
Tried bending the strike to get a firmer grip, but no luck. Replaced the door latch and strike. Washer is about ten years old. You can feel the new catch has a more positive engagement. When you replace the strike, be sure not to tilt it downward in front. It will go in the way but it will keep the door from closing. Not sure I needed to replace the strike but didn't want to risk more downtime.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3372028
Fix a detergent lid that won't stay closed or open properly with this dispenser lid pin. Simple repair with video guide—most DIYers complete in minutes.
Do-It-Yourself Stories from Customers like You
Latch would not open consistently on detergent dispenser James G. • Waxhaw , NC • January 12, 2015
Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8193882
Dishwasher won't start or door won't stay closed? The door latch bracket secures the latch mechanism for proper door closure. 30-45 min DIY repair.
Do-It-Yourself Stories from Customers like You
Replaced door latch parts. Michelle S. • Olmsted Twp , OH • September 05, 2017
Our 7 y/o dishwasher wouldn't close and therefore we couldn't get it to run. I called several service places who charged $75-$90 diagnostic plus parts & labor, and they were not able to get here for at least a week. I knew it was going to run at least $200. Kitchenaid wanted > $400 for a 1 YEAR WARRANTY, but it would cover this service call and any more throughout the next year. Seemed a little steep given the unit is already 7 y/o. I watched a couple videos on this site and YouTube and...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10224430
The Dispenser is an OEM part for Whirlpool dishwashers, integral to the appliance's operation by dispensing detergent and rinse aid during the wash cycle. This component ensures that the right amount of cleaning agent is released at the correct time, contributing significantly to the effectiveness of each wash.
Causes of dispenser failure include cracked internal components from repeated door openings, mineral buildup clogging dispenser parts, or electrical malfunctions preventing dispensing functions.
Symptoms of a malfunctioning dispenser include:
- Detergent not being released during the cycle
- Rinse aid leakage or inconsistent dispensing
- The dispenser door sticking or failing to open
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My dishwasher detergent dispensor door was not opening during wash cycle and the control panel was loose because the plastic mounts for the screws were broken Reed W. • Eldon , MO • November 11, 2014
I ordered a new detergent dispenser and control assembly, watched a few videos on you tube and dived in. The repairs were pretty simple once I got started and while I was doing this I went the extra step and cleaned out the drain. I would suggest doing this annually. Pretty simple to do and only 5 screws to get to the drain and the grinder. I found plastic and several other things that would not allow the dishwasher to drain properly and probably part of the problem of dishes not getting...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 154388801
This is the cap that seals the rinse aid reservoir on the dishwasher door. It keeps rinse aid contained so it dispenses properly during the rinse cycle. Replace this cap if it is cracked, missing, or no longer seals tightly, which can cause rinse aid to leak out prematurely and result in spotty or poorly dried dishes.
Do-It-Yourself Stories from Customers like You
The dishwasher left by tenant with the cover panel loose on the left the door hyperextending a bit when opened. Marlena R. • Star City , IN • July 07, 2021
Took cover completely off and tried putting back, could not match up left screw with available screw hole. Tried many different configurations and sequences to make this happen. watched a video on changing the front panel, the door in it had four screws, mine 2, no help there. Searched on the hyperextending issue, found an article about dogs and kids [had both here] climbing on the door and to check the springs and linkages. Linkages intact both sides, R [opposite] side spring very stretched....
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 99002254
Fix a dishwasher that stops mid-cycle or won't start without holding the door closed. This latch assembly secures the door and activates switches.
This part fixes the following symptoms
-
Won't start
-
Door latch failure
See more...
Do-It-Yourself Stories from Customers like You
Dishwasher would not complete or start its cycle without applying constant pressure to the door Wayne M. • Newark , DE • November 18, 2014
Discovered that the common cause of the problem was the latch in the door. Found a video online that showed the exact procedure for my model dishwasher. Ordered the part from AppliancePartsPros on a Thursday afternoon and it was in my hands by noon on Friday. Carefully took the door apart, compared parts, reassembled, and the joy on my wife's face was priceless when the dishwasher started up without doing anything special. Do not be afraid to attempt this repair.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3378138
The Dispenser Lid is an OEM replacement part for Whirlpool dishwashers. Located at the top of the dishwasher door, it provides access to add detergent and rinse aid to the internal dispenser compartment below. This dishwasher soap dispenser lid is included in the dispenser cover kit 4387043.
Causes of a bad dispenser lid can include wear and tear of hinge points from years of repeated openings. Cracks may also arise in the plastic material.
Symptoms of a bad Dispenser Lid include:
- Difficulty fully opening or closing the lid securely
- Leaks or spills occurring from around the sealing edges
- Potential cracks that compromise lid integrity or function
- Hinges that are loose or fail to support the lid in position
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Amana, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Soap dispenser lid spring wasn't opening lid Frank D. • Philadelphia , PA • December 22, 2014
I watched the video on your site and it showed step by step how to replace the spring. Excellent shipping time. Good customer service on chat forum.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387043
The Dispenser Cover Kit is an OEM replacement part for Whirlpool dishwashers. It includes both the outer lid that protects the detergent and rinse aid compartments as well as the latch mechanism securing it closed. This dishwasher dispenser kit included the cover, lid hinge pin, spring, snap, and latch.
Causes of a bad dispenser cover can include wear and tear from frequent use, physical damage from accidental impact, and discoloration or warping due to exposure to sunlight or heat.
Symptoms of a bad dispenser cover kit include:
- Cracks or breaks in the cover
- Discoloration or yellowing of the plastic
- The cover not fitting securely or becoming loose
- Difficulty in using the dispenser controls due to a damaged cover
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dispenser cover would no longer open automatically Rhonda D. • Buda , TX • March 25, 2014
We ordered the dispenser cover kit. the problem was with the spring. followed your "how to" video and it was a quick and easy fix!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: A00130341
Fix a soap door that won't open or stay closed. This detergent dispenser releases soap at the right time during wash cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Dish soap door wouldn't stay closed Brad D. • Orrville , OH • April 19, 2020
Started with a YouTube video, then this site. Between the two, fixed in about a half an hour.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD30X10020
Roller bearing cage installs in the dishwasher rack track to support smooth gliding. Replace if cracked, broken, or causing the rack to stick or slide out.
Do-It-Yourself Stories from Customers like You
Instructions to replace wd12x10304 (ap4484666) roller bearings Richard L. • Webster , NY • February 18, 2016
I did not see the old ones fall out, so I was not sure the exact product placement within the rail, which was frustrating, to say the least.
For the next person's benefit....these slide into the MIDDLE of the rail that is attached to both sides of the dishwasher. Not the front, not the back, but the middle!
Steps to fix:
1) Order 2 of these Roller Bearing Cage.
2) Order 4 of WD12X10304 (AP4484666) end caps!! Unless you have brand new ones already, you will need them for sure and they are...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 154662601
If your dishwasher door won't latch or stay closed, the door strike may be broken or corroded. This repair takes about 15 minutes with basic tools.
This part fixes the following symptoms
-
Door latch failure
-
Door won't close
See more...
Do-It-Yourself Stories from Customers like You
Door was not closing properly Channoya W. • Jacksonville , NC • March 20, 2014
Replaced the door strike
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507354
Soap dispenser door won't open or latch is broken? This detergent dispenser assembly fixes dispensing failures. DIY repair takes 10-15 minutes.
Do-It-Yourself Stories from Customers like You
Rinse agent leaking from the dispenser Hal C. • Clarksville , TN • September 13, 2016
This was a pretty easy fix. Removed the screws around the perimeter of the inside cover of the door and pressed the outer door cover upward to release it from slots retaining it. There are four wires to remove (2 for the detergent door release and 2 for the rinse agent release). Removed the 6 screws retaining the dispenser assembly and inserted the new one. Reassembly is simply in reverse order.
Problem solved for less than the cost of a service technician's call!
Read more
More
Genuine Ge part
By: Ge
Part Number: WD12X32799
Fix a detergent door that won't open during wash cycles. This dishwasher dispenser module restores proper detergent and rinse aid release timing.
Do-It-Yourself Stories from Customers like You
The dishwasher detergent door was not opening during the wash cycle. Mike E. • Moncks Corner , SC • January 19, 2021
I found a video on YouTube showing the exact repair sequence.
Read more
More