Dishwasher Roller Nut Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8575897
Wheel mount assembly for dishwasher upper rack. Attaches to rack and glides along side rails. Replace when cracked, broken, or worn for smooth rolling.
Do-It-Yourself Stories from Customers like You
Upper rack in dishwasher guide wheel broke easy repair after watching video Frank F. • Jefferson Twp , PA • September 29, 2014
Replaced both wheels after watching your video. easy repair
Read more
More
$11.78
- Compare At:
-
$13.90
- You Save:
-
$2.12
Genuine Bosch part
By: Bosch
Part Number: 00176121
Mounting screw that secures the toe kick panel to the bottom frame of your dishwasher. Replace if screw is lost, stripped, or damaged during installation.
Do-It-Yourself Stories from Customers like You
Bosch part(kick plate) was missing Kyle K. • Green Bay , WI • November 14, 2015
My order arrived very fast and was easy to install.
Read more
More
$6.41
- Compare At:
-
$7.56
- You Save:
-
$1.15
Genuine Ge part
By: Ge
Part Number: WH02X10002
Mounting screw for washer components. Secures drain hose clamps, panels, and internal parts. Replace if missing, stripped, or lost during repair.
Do-It-Yourself Stories from Customers like You
Had to replace drain hose on he washer Tom F. • Lovington , IL • January 14, 2020
Put new hose on. It was the kind that pushed in and had a flange on it with two screws.
Read more
More
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Whirlpool part
By: Whirlpool
Part Number: W10850374
Dishwasher rack wheel that attaches to the upper or lower rack for smooth gliding. Replace if worn, cracked, broken, or missing to restore rack stability.
Do-It-Yourself Stories from Customers like You
Both back wheels broke off their assemblies and basket was unstable. James M. • Ocala , FL • March 28, 2021
Removed and replaced wheel assemblies.
Read more
More
$47.41
- Compare At:
-
$56.42
- You Save:
-
$9.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10254909
Replacement wheel assembly for dishwasher upper rack. Installs on the rack rail to allow smooth gliding in and out. Replace if cracked or worn.
Do-It-Yourself Stories from Customers like You
Top rack wheel pulled out of support arm Paul J. • Spanish Fork , UT • January 18, 2016
Installed a new top rack wheel support arm. The repair took less than 5 minutes. I appreciated the repair video on how to remove old support arm and end cap.
Read more
More
$48.46
- Compare At:
-
$57.18
- You Save:
-
$8.72
Genuine Ge part
By: Ge
Part Number: WD12X22801
Rack roller bracket with three wheels that mounts to the dishwasher rack and rides in the rail. Replace if bracket is damaged or wheels are cracked or worn.
More
$28.48
- Compare At:
-
$33.89
- You Save:
-
$5.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3385088
Replacement dishwasher dishrack wheel installs on the upper or lower rack to restore smooth gliding. Replace worn, broken, or missing wheels to fix jamming.
Do-It-Yourself Stories from Customers like You
Upper tray roller failure Michael S. • Atascadero , CA • February 28, 2022
Ordered replacement parts and installed them. A lot less expensive than having a dealership fix it.
Read more
More
$12.95
- Compare At:
-
$15.54
- You Save:
-
$2.59
Genuine Ge part
By: Ge
Part Number: WD02X31882
Adjustable leveling leg for dishwashers. Screws into the base frame to set height and stabilize the unit. Replace if worn, broken, or missing.
More
$11.47
- Compare At:
-
$13.65
- You Save:
-
$2.18
Genuine Ge part
By: Ge
Part Number: WD30X22347
Roller and bracket assembly for dishwasher rack systems. Clips to the side of the rack to allow smooth sliding. Replace if broken, cracked, or worn.
Do-It-Yourself Stories from Customers like You
Broken parts Roger M. • Fryeburg , ME • November 23, 2024
Parts arrived sooner than expected and parts fit perfectly.
Very pleased with result.
Read more
More
$11.47
- Compare At:
-
$13.53
- You Save:
-
$2.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WP240285
This planetary drip ring fits around a stand mixer's planetary assembly to cover the gap below the gearcase and help catch grease residue, restoring a clean, finished look where the beater hub meets the mixer head.
- Mounts at the base of the mixer head around the planetary housing
- Helps deflect incidental gearbox grease residue away from the bowl area
- Covers the seam between housing and planetary for a clean, finished appearance
- Replace if bent, cracked, loose, missing, or if you notice grease spotting beneath the planetary
What's included: One planetary drip ring. Install notes:
- Unplug the mixer and remove the bowl and attachments
- Gently pry off the old ring; clean the seating surface of debris or residue
- Align and press the new ring evenly until fully seated; avoid deforming the ring or striking the gearcase
- On some models, access may require lowering/removing the planetary
Note: This ring is a trim/deflector piece and not a fluid seal. Persistent oil leakage indicates separate gearcase service.
Do-It-Yourself Stories from Customers like You
Worm gear failure on my KitchenAid 5 qt "professional" lift bowl mixer. Edward B. • Mount Horeb , WI • January 24, 2020
This was a problem that I'd had previously with this mixer. The worm gear, which is designed to fail (so that more serious damage does not occur to the motor), did fail while I was mixing some multi-grain bread dough. After the previous failure (pre-youtube days), I took the machine in for repair. The repair-shop cost came to about $150 in labor. Parts were extra. This time, I decided to do the repair myself, since I figured that I knew what was wrong. I found the appliancepartspros...
Read more
More
$13.95
- Compare At:
-
$16.46
- You Save:
-
$2.51
Genuine Lg part
By: Lg
Part Number: 4370ED3006A
Pivot shaft that supports and allows the upper spray arm to rotate in your dishwasher. Replace if broken, cracked, or worn to restore proper arm movement.
Do-It-Yourself Stories from Customers like You
Top spray arm not spinning in lg dishwasher Mark F. • San Carlos , CA • February 02, 2020
I replaced the upper nozzle guide, nozzle shaft and upper spray arm. I also replaced the pump gasket for good measure.
Top rack dishes had not been cleaning properly. I first removed the filter assembly to inspect the main pump from above. It was clogged but after cleaning and reassembly I observed that while middle and bottom spray arms were changing position, the upper spray arm was not. I confirmed that water was flowing through the upper spray arm by placing some empty yogurt pots on a...
Read more
More
$14.57
- Compare At:
-
$17.48
- You Save:
-
$2.91
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99003148
Dishrack roller and axle assembly for dishwasher upper rack. Replace when wheels are cracked, broken, or missing to restore smooth rack gliding.
Do-It-Yourself Stories from Customers like You
Dishwasher panel buttons wouldn't work Stephen C. • Potomac Falls , VA • November 30, 2015
Replaced dishwasher control panel
Read more
More
$12.95
- Compare At:
-
$15.54
- You Save:
-
$2.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP240286-1
Color: White
Do-It-Yourself Stories from Customers like You
Planetary was damaged when one screw came lose and was shaved to bits Tom A. • Allentown , PA • November 09, 2014
Removed the old planetary and cleaned metal shavings from gears. Transferred the old axle/gear assembly onto the new planetary. Inserted the new (and expensive) screw for the main gear and torqued it very tight (as well as the original other four screws). Slid the new planetary gears together and re-inserted the holding pin. Tapped on the cover ring and was done.
Read more
More
$32.64
- Compare At:
-
$38.52
- You Save:
-
$5.88
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304453707
This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.
- Fastens metal or plastic parts to the cabinet/frame
- Helps maintain alignment and reduce vibration or rattling
- Direct replacement for lost, damaged, or rusted hardware
- Keeps covers and brackets safely in place
What's included: 1 screw Install notes:
- Disconnect power before servicing; for gas appliances, also shut off gas supply
- Match one-for-one with the original screw; verify length/type before installation
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Use the correct driver bit to prevent stripping the screw head
Do-It-Yourself Stories from Customers like You
Ice dispenser not working auger not turning Roger H. • Chesapeake , VA • August 21, 2016
Replace dispenser micro switch. Also replaced broken faceplate and rusty screws. Appliance parts Pro YouTube video was helpful in diagnosis and disassembly. Parts arrived quickly.
Read more
More
$23.61
- Compare At:
-
$27.86
- You Save:
-
$4.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002072
Secures rack rollers to the dishwasher rack edge for smooth sliding. Replace this strip if cracked, broken, or tabs are damaged to restore proper alignment.
Do-It-Yourself Stories from Customers like You
Wheel Mounting strip broke after the wheels had jumped the track. Gerald C. • Pittsburgh , PA • March 31, 2014
Bought new strip then found that both of the wheels had worn flats on them and had to purchase newwheels.
Read more
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Samsung part
By: Samsung
Part Number: DD61-00222A
Holds the upper rack roller wheels in your dishwasher. Replace this assembly if the holder is cracked, broken, or missing to restore smooth rack gliding.
Do-It-Yourself Stories from Customers like You
Brokenand misssing rollers Anthony S. • Congers , NY • December 13, 2016
Purchase replacements. Removed old roller carrier from lower basket by pushing on retaining clips with butt of screw driver. Maybe necessary to use flat end to get it started coming off.
The site helped in locating the correct part number roller assembly for my model.
Read more
More
$14.39
- Compare At:
-
$15.83
- You Save:
-
$1.44