Dishwasher Axle, Roller, Pulley Parts

The Lower Dishrack Wheel Assembly is an OEM replacement part for Whirlpool dishwashers, designed to ensure the smooth and easy movement of the lower dishrack in and out of the dishwasher. This assembly includes the wheel and the mount that attaches to the dishrack, allowing effortless gliding even when the rack is fully loaded with dishes.  

Note: Lower dishrack roller assembly, gray, (4) required to replace them all. Sold individually.

Symptoms of a failing Lower Dishrack Wheel Assembly include:

• The dishrack sticking or struggling to slide in and out
• A wheel breaking off or becoming damaged, leading to uneven movement
• Noise during dishrack movement, indicating wear or damage to the wheels

Causes of a bad Lower Dishrack Wheel Assembly can range from normal wear and tear, which can lead to the degradation of the wheel material or the loosening of the mount, to overloading the dishrack, which puts excess pressure on the wheels and their attachments. 

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Lower Dishrack Roller is an OEM replacement part for Whirlpool dishwashers, designed to ensure the smooth movement of the lower dishrack in and out of the dishwasher, allowing for easy loading and unloading of dishes.  

Symptoms of a bad Lower Dishrack Roller include:

• The dishrack becoming difficult to pull out or push in
• A noticeable wobble or instability in the dishrack when it is moved
• The roller breaking or falling off

Causes of these problems typically stem from normal wear and tear, accumulation of food particles or debris around the rollers, or overloading the dishrack, which can put excessive strain on the rollers.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Restore smooth, dependable rack movement. This kit replaces worn carriers and rollers so the lower dishrack glides in and out without binding, derailing, or dropping.

What it does

• Supports and guides the lower rack along the tracks
• Replaces broken, missing, or flat-spotted wheels and cracked carriers
• Helps prevent the rack from popping off the rails during loading
• Reduces drag that leads to stiff, uneven rack travel

What’s included
Four carrier brackets, four roller wheel brackets (covers), and eight wheels — a complete set of four assemblies.

Install notes

• Disconnect power before servicing the rack area.
• Pull the lower rack out; swap one assembly at a time to match left/right orientation.
• Fully seat tabs/locks on each carrier; verify wheels roll freely.
• Best practice: replace all four together for even tracking, then run a quick test cycle.

The Lower Dishrack Roller Kit is an OEM part for GE dishwashers. This kit includes 8 wheels and 8 axles. It allows it to glide smoothly in and out of the dishwasher. Proper functioning of these rollers is crucial for the easy loading and unloading of dishes, ensuring that the dishrack moves efficiently along its tracks.

You should replace the lower dishrack roller kit if the rollers become worn out or damaged. Common causes of roller issues include wear and tear from frequent use, accumulation of debris, or breakage due to heavy loads or accidental impact.

Symptoms of a bad lower dishrack roller kit include:

• Difficulty sliding the lower dishrack in and out
• The dishrack derailing or not staying on its tracks
• Unusual noises when moving the dishrack
• Visible damage or wear to the rollers

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Dishrack Wheel is an OEM replacement part for Bosch dishwashers. These wheels are essential components that allow for smooth and effortless movement of the lower dishrack or basket in and out of the dishwasher tub.

Symptoms of needing to replace the lower dishrack wheels include:

• Difficulty in sliding the dishrack in or out
• Excessive noise or grinding sounds when moving the rack
• Visible damage, cracks, or worn-out wheels

Causes of faulty lower dishrack wheels can include normal wear and tear over time, exposure to debris or foreign objects that can cause damage, or issues with the track or rail system on which the wheels operate.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwasher models.

The Dishrack Adjuster and Wheel is an OEM part for Whirlpool dishwashers. This part ensures the dishwasher rack can be easily adjusted and smoothly rolled in and out of the dishwasher. The adjuster mechanism allows for the height of the upper rack to be modified to accommodate dishes of various sizes, while the wheel facilitates effortless movement.

Over time, the dishrack adjuster and wheels may become damaged from wear and tear, leading to difficulty in adjusting the rack height or issues with the rack's movement. 

Symptoms of a bad Dishrack Adjuster and Wheel include:

• Difficulty in adjusting the height of the dishwasher rack.
• The dishwasher rack fails to stay in place at the desired height.
• The rack becomes challenging to slide in or out of the dishwasher.
• Noticeable wear, cracks, or breakage on the wheels or adjuster.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Lower Dishrack Roller and Axle Kit is an OEM part for GE dishwashers. This kit includes rollers and axles that attach to the lower dishrack, allowing it to slide smoothly in and out of the dishwasher for easy loading and unloading of dishes.

Causes of a bad roller and axle kit can include regular wear and tear from frequent use, damage from overloading the dishrack, or exposure to harsh cleaning chemicals. These factors can lead to the rollers or axles becoming worn, cracked, or broken, making it difficult to move the dishrack.

Symptoms of a bad lower dishrack roller and axle kit include:

• Difficulty sliding the lower dishrack in and out
• The dishrack derailing or coming off track
• Visible cracks or wear on the rollers or axles
• Uneven or wobbly movement of the dishrack

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.

Symptoms of needing to replace the lower rack roller include:

• Difficulty in sliding the lower rack in or out
• Excessive noise or grinding during rack movement
• The rack becoming stuck or not rolling smoothly
• Visible wear, cracks, or damage to the roller itself

Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

The Dish Rack Wheel with Clip is an OEM part for Bosch dishwashers. It is essential for the smooth gliding of the dishwasher rack in and out of the unit, facilitating easy loading and unloading of dishes. 

Causes of a bad Dish Rack Wheel with Clip can include physical damage from impact, wear from frequent use, or degradation of the wheel material, leading to a less smooth operation.

Symptoms of a bad Dish Rack Wheel with Clip include:

• Difficulty in sliding the rack in and out
• Unusual noises during rack movement
• The rack becoming detached or misaligned during use

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Roller and Stud Assembly - 4 Pack is an OEM part for GE dishwashers. This assembly includes four rollers and studs that are essential for the smooth operation of the dishwasher's lower rack. The rollers ensure that the rack glides in and out effortlessly, providing easy access for loading and unloading dishes. 

Causes of a bad roller and stud assembly include regular wear and tear, accumulation of dirt and debris that can hinder movement, and damage from heavy loads or improper loading of dishes.

Symptoms of a bad roller and stud assembly include:

• Difficulty pulling the rack in and out
• Squeaking or grinding noises during rack movement
• The rack getting stuck or detaching from the guide rail

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Solenoid Armature and Linkage is an OEM replacement part for GE dishwashers. It is responsible for controlling the dishwasher's draining process by operating the drain valve, which regulates the flow of water out of the dishwasher during the drain cycle.

Symptoms of a bad solenoid armature and linkage include:

• Dishwasher not filling with water or filling improperly
• Water leaks from the inlet valve area
• Dishwasher not advancing to the next cycle due to water flow issues
• Error codes or indicators related to water inlet problems

Causes of a bad solenoid armature and linkage can include mineral buildup or debris obstructing the valve, electrical malfunctions in the solenoid coil, or mechanical wear and tear of the linkage components.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

The Lower Dishrack Wheel Assembly is an OEM part for Frigidaire dishwashers. This part allows the lower rack to slide in and out easily without causing damage to the dishwasher interior. This part ensures that the rack moves smoothly, providing ease of access to load and unload dishes.

Causes of a bad part can be varied, including normal wear and tear from regular use, overloading the rack with heavy dishes, which puts extra stress on the wheels, or accidental damage during loading or cleaning.

Symptoms of a bad Lower Dishrack Wheel Assembly include:

• The lower rack getting stuck or having difficulty moving in and out.
• Unusual noises coming from the rack as it moves.
• Visible damage or wear to the wheels.
• The rack frequently falling off its tracks due to instability.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Upper Rack Roller Wheel Assembly is an OEM part for Whirlpool dishwashers. This assembly includes a single roller wheel and the mounting hardware, which are crucial for the smooth gliding of the dishwasher's upper rack. 

Symptoms of a failing Upper Rack Roller Wheel Assembly include:

• The upper rack sticking or struggling to slide in and out
• A grinding or squeaking noise when the rack is moved
• The rack sagging or tilting, indicating that a wheel may be broken or missing
• Difficulty in securing the rack in its proper position

Causes of a bad roller wheel assembly often involve regular wear and tear, accumulation of debris in the rollers, or damage from overloading the rack. These factors can lead to the wheels cracking or the bearings within the rollers seizing up.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Reel is the rotating spool that winds or guides a cord, cable, or belt inside the appliance. It maintains smooth motion and proper tension so the connected mechanism operates reliably without binding, slippage, or jams.

• Guides or winds a cord, cable, or belt on a central hub
• Maintains alignment and tension for smooth, consistent operation
• Helps prevent snagging, overwind, or uneven take-up
• Wear or damage can cause noise, binding, loss of tension, or failure to retract/advance

• Disconnect power and any utilities before servicing the appliance
• Access the assembly per your service manual; note routing and orientation with photos
• If spring-loaded, release and set tension carefully to avoid injury
• Transfer any clips, fasteners, or connections from the original part and verify smooth operation before reassembly

The Upper Dishrack Wheel is an OEM part for Whirlpool dishwashers. It is designed to attach to the upper dishrack, allowing it to glide smoothly along the tracks during loading and unloading. This wheel ensures that the upper rack moves effortlessly, providing easy access to dishes and maintaining the dishwasher's efficiency.

Over time, the upper dishrack wheel can become faulty. Causes of a bad upper dishrack wheel can include regular wear and tear, damage from heavy loads, or exposure to high temperatures and detergents. A malfunctioning wheel can hinder the movement of the upper dishrack, making it difficult to access and load dishes properly.

Symptoms of a bad upper dishrack wheel include:

• The upper dishrack not sliding smoothly or getting stuck
• The dishrack being uneven or lopsided
• Noise or resistance when moving the upper dishrack
• The wheel appearing cracked, broken, or missing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Upper Dishrack Wheel is an OEM part for Whirlpool dishwashers. This wheel attaches to the upper dishrack, allowing it to slide in and out smoothly along the dishwasher rails. It ensures easy access to the upper rack for loading and unloading dishes, contributing to the overall functionality of the dishwasher.

Over time, the upper dishrack wheel can wear out or become damaged. Causes of a bad dishrack wheel can include frequent use, heavy loads on the dishrack, or accidental damage during loading or unloading.

Symptoms of a bad Upper Dishrack Wheel include:

• The upper dishrack not sliding smoothly or becoming stuck
• Unusual noises when moving the dishrack
• The dishrack becoming misaligned or wobbling

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.