Dishwasher Shelf Support Stud Parts
Genuine Ge part
By: Ge
Part Number: WD35X21039
Replace cracked or worn upper rack rollers that prevent smooth sliding. Kit includes studs and wheels for secure rack gliding. Fits GE dishwashers.
Do-It-Yourself Stories from Customers like You
The rack slide's end cap is missing. Ernesto G. • Orlando , FL • October 15, 2022
This is the simplest thing on the world. Just push the rack slide end cap with the holder on the side of the rack and press it
Read more
More
$35.72
- Compare At:
-
$42.86
- You Save:
-
$7.14
Genuine Ge part
By: Ge
Part Number: WD12X10352
Mounts the mid-level spray arm to its supply tube. Replace if cracked, worn, or broken to keep the spray arm centered and spinning freely on the rack.
Do-It-Yourself Stories from Customers like You
Broken sprayer on middle rack very easy project Sylvia R. • Queen Creek , AZ • August 02, 2018
The middle sprayer sheared off our GE Power 3 dishwasher, ruining the hub in the process. We removed the rack from the dishwasher to make it easier to access the sprayer hub, otherwise it's awkward. The biggest challenge was finding the right tool in our garage (we used a 1/4" wrench as we did not have the right socket size). Once the screw was removed, it was quite easy to remove the hub and attach the new one. The rest was simply attaching the new sprayer to the hub using the included...
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10323195
This dispenser water tube routes water from the inlet to the refrigerator's in-door dispenser manifold, helping ensure a steady, leak-free flow to the dispenser.
- Directs water from the supply line to the dispenser manifold
- A damaged or cracked tube can cause leaks, low/erratic dispenser flow, or air in the water line
- Replacing a leaking tube can help restore normal dispenser operation and prevent water damage
What's included: 1 water tube/manifold piece as shown. Installation notes:
- Unplug refrigerator and shut off water supply before service
- Have a towel/container ready to catch residual water
- Note tube routing and connections; push-to-connect fittings may require firm seating for a watertight seal
- After installation, turn water on and check all joints for leaks
Do-It-Yourself Stories from Customers like You
Not cleaning well, silverware very bad. Walter M. • Labelle , FL • December 10, 2017
Replaced spray arms and tube. Found all had debris in them and prohibited water pressure from reaching items. After replacement everything comes out sparkling. Don't understand how the spray arms getting plugged. Almost like waste water is recycled. Turns out to be a very easy project and if needed AppliancePartsPro has information and directions available at your finger tips.!
Read more
More
$60.52
- Compare At:
-
$71.41
- You Save:
-
$10.89
Genuine Whirlpool part
By: Whirlpool
Part Number: 4317933
Replace worn, broken, or missing lower rack rollers. This 4-pack includes white double roller attachments that snap onto your dishwasher's lower rack.
Do-It-Yourself Stories from Customers like You
Broken roller on lower dishwasher basket Linda H. • Conyers , GA • July 25, 2014
Popped the old rollers off and snapped on new ones.
Read more
More
$29.48
- Compare At:
-
$35.38
- You Save:
-
$5.90
Genuine Whirlpool part
By: Whirlpool
Part Number: W10917062
This drive coupling connects the motor shaft to the blender jar. Replace if worn, stripped, or cracked to restore proper blade rotation and function.
Do-It-Yourself Stories from Customers like You
Drive coupler and coupling both on blender and blender jar, were chewed up by using hot stuff in blender. Which we should have not done. Joseph F. • Turnersville , NJ • October 11, 2018
Just ordered blender jar coupler and blender motor coupling and now works fine and like new.
Read more
More
$12.95
- Compare At:
-
$15.54
- You Save:
-
$2.59
Genuine Ge part
By: Ge
Part Number: WD12X10278
White dishwasher lower rack roller axle. Replaces broken or worn axles that cause wheels to fall off. Snap-in design for easy installation.
Do-It-Yourself Stories from Customers like You
Dishwasher rollers had worn down and some were melted since they fell off into the heating element so the lower shelf door was constantly off its track Kara O. • Cincinnati , OH • February 15, 2015
We purchased both the roller studs and new rollers for all of the slots on the lower rack. They came two days later and I was able to easily click them into place and the lower rack now rolls smoothly and securely. I only wish I hadn't lived with it in the broken stage as long as I did - such an easy and affordable fix.
Read more
More
$3.95
- Compare At:
-
$8.36
- You Save:
-
$4.41
Genuine Ge part
By: Ge
Part Number: WD12X22503
Mounts and secures the upper spray arm in your dishwasher tub. Replace if cracked, broken, or missing to restore proper spray arm positioning.
Do-It-Yourself Stories from Customers like You
Upper spray arm on GE dishwasher fell off Tommy C. • Austin , TX • March 01, 2021
EASY! I went to your easy look up guide with Serial #, purchased $10.00 of parts, came in two days and fixed it myself. Saved $200.00. You can Do It!!
Read more
More
$7.36
- Compare At:
-
$8.76
- You Save:
-
$1.40
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10082867
Secures the upper spray arm to the water feed. Replace if cracked, broken, or loose to restore proper arm alignment and rotation for the top rack.
Do-It-Yourself Stories from Customers like You
Top rack items were not coming out clean Stanley R. • Bloomfield , NJ • August 07, 2016
Replaced all leaky parts including the wash arm that send water to the top rack. Most parts are just snap-in and one required a single screw. Very easy job.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Ge part
By: Ge
Part Number: WD18X10051
Molded adapter plate that secures and seals spray system components in your dishwasher. Replace if cracked, warped, or broken to stop leaks.
Do-It-Yourself Stories from Customers like You
Broken part Melissa L. • Shreveport , LA • April 22, 2016
My husband
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507405
Replacement dishrack roller for dishwashers. Attaches to the sides of the rack to allow smooth gliding movement. Replace when cracked, broken, or worn.
Do-It-Yourself Stories from Customers like You
Two front bottom rollers for the top rack were partly broken, and the rack kept coming off the rollers. George W. • Westminster: , MD • April 04, 2014
Unscrewed the old rollers one at a time, and screwed in the new ones. Couldn't have been simpler. Why did I put it off for so long?
Read more
More
$27.38
- Compare At:
-
$32.58
- You Save:
-
$5.20
Genuine Whirlpool part
By: Whirlpool
Part Number: W11614118
Replacement tub wheel that supports and guides the washer drum for smooth, aligned rotation. Replace worn wheels to reduce drum noise, rubbing and uneven spinning. What it does:
- Supports and guides the washer drum so it turns smoothly and stays aligned.
- Reduces friction between the drum and cabinet, helping prevent scraping or binding.
- Replace if the drum squeaks, drags, rubs, or wobbles during spin cycles.
What's included: One tub wheel. Install notes:
- Disconnect power and turn off water supply before servicing the appliance.
- Access may require removing the cabinet, front or rear panel depending on model.
- Inspect adjacent shafts, bearings and mounts for wear and replace if needed.
- Reassemble and test the washer after installation to ensure proper drum movement.
More
$14.45
- Compare At:
-
$17.05
- You Save:
-
$2.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268843
There is a split at the 3 O'clock position. Color: white. It measures about 3 inches wide by 4 inches high.
Do-It-Yourself Stories from Customers like You
The water supply tube to the upper level of the dishwasher broke. While looking for that part, I realized we were missing the feed tube holder Lucia B. • Exeter , ME • June 06, 2020
We had to take the clips off the side arms to remove the upper basket. Then we turned it upside down to easily access the supply tube. There was one screw that held the assembly in place. We removed that and then replaced the part and put it back together. The feed tube holder just clipped to the upper basket.
Read more
More
$45.95
- Compare At:
-
$55.14
- You Save:
-
$9.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268713
Replaces damaged dishwasher dishrack wheel assembly. Installs on upper or lower rack for smooth rolling. Needed when wheels crack or tabs break.
Do-It-Yourself Stories from Customers like You
Whirlpool dishwasher lower rack wheel assembly. Gregory Z. • Missoula , MT • March 01, 2019
Ordered wheel assembly. Received in a couple of days. Easy FIT project. Problem solved.
Read more
More
$52.68
- Compare At:
-
$62.16
- You Save:
-
$9.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251051
This is a rack adjuster mechanism that mounts on the right side of the upper dish rack and allows you to raise or lower it to accommodate different dish sizes. It includes the adjuster housing and associated components that lock the rack into position. Replace this part if the upper rack no longer stays at the selected height, slides unevenly, or the adjuster mechanism is cracked or broken.
Do-It-Yourself Stories from Customers like You
Both adjusters were broken causing the basket to tilt downward as the it was extended in order to be loaded the more it was loaded the further it would tilt downward Mr M. • Reading , PA • June 18, 2016
I removed the basket, studied the old adjusters before removing them, and installed the new ones using some of the old parts(adjustment levers and the covers). adjusters work like a charm.. the only tool required was a screwdriver with removable torque bit.
Read more
More
$75.68
- Compare At:
-
$90.06
- You Save:
-
$14.38
Genuine Frigidaire part
By: Frigidaire
Part Number: 405507213
Lower rack roller wheel for dishwashers. Enables smooth rack gliding on the track. Replace when wheels crack, break, or no longer roll freely.
More
$38.72
- Compare At:
-
$45.69
- You Save:
-
$6.97
Genuine Whirlpool part
By: Whirlpool
Part Number: W11193827
Left-hand support bracket that secures and aligns the left side of dishwasher assembly. Replace if cracked, broken, or missing to restore fit.
More
$20.38
- Compare At:
-
$24.25
- You Save:
-
$3.87