Dishwasher Tool Spark Module Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: A06115601
Fix a dishwasher that won't cycle properly, shows error codes, or has a drain pump that won't stop. This main control board directs all programmed cycles.
Do-It-Yourself Stories from Customers like You
The drain pump would not stop running Brad M. • Willmar , MN • December 01, 2024
Install new board
Read more
More
$86.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD21X10370
Dishwasher won't start, stops mid-cycle, or won't advance? Replace the main control board to restore proper cycle operation. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Ge dishwasher filling then stopping and not going to next cycle Steven G. • Central Valley , NY • March 03, 2015
Turn off power to machine, Take off door panel - 12 screws. hold up door panel a bit and make sure to remove the ribbon from the touch pad to the control module (use some pliers to rock it out of the board). Since I was changing the Module, I just removed the 1 screw that held it in place and it gave me some more room to get my hands in there and remove all the wiring freeing up the board to remove the touch pad ribbon last (I didn't want to tear it because I was not replacing it and after 9...
Read more
More
$168.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10595569
Dishwasher stops mid-cycle or won't start? The control board regulates wash and dry cycles. A failed board causes no power or incomplete cycles.
Do-It-Yourself Stories from Customers like You
It was dead like no power Brian D. • Mount Olive , AL • June 01, 2015
I did a little research on the internet. I check to make sure it was getting power with Ohm meter. I took the front panel off to see what I could find. I found 2 dead roaches in the control board box and there was some brown stuff on the control board. I checked the price to replace the part online and local. AppliancePartsPros had the best price and return policy. I figured I had nothing to lose be trying the part out to see if it would work. I installed the new board and it was alive again....
Read more
More
$191.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10482988
Dishwasher won't start or lights flashing? The electronic control board manages cycles and timing. Moderate DIY repair restores full operation.
Do-It-Yourself Stories from Customers like You
Panel lights flashing continuously Timothy G. • Merrimack , NH • September 18, 2015
Replaced control board
Read more
More
$175.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10486463
Fix a dishwasher that won't start, cycles won't change, or lights flash with this electronic control board. Coordinates all wash and drain functions.
Do-It-Yourself Stories from Customers like You
Dishwasher light flashing John C. • Point Pleasant Beach , NJ • September 29, 2017
Replaced control
Read more
More
$175.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00445925
Replacement control unit that manages the appliance's electronic functions, handling cycle timing, user inputs, and control signals to restore normal operation. Fits where the original electronic control board controls cycles and the user interface. What it does:
- Serves as the appliance's primary electronic control board, processing button/keypad commands and sequencing cycles.
- Controls cycle timing, relays, and signals to motors, valves, and heaters.
- Common symptoms of a failing unit: unresponsive controls, cycles won't start or advance, or intermittent operation.
- Does not include peripheral components such as face panels, knobs, or separate display overlays.
What's included: One control unit. Install notes:
- Always disconnect power to the appliance before starting work to avoid shock or damage.
- Handle the board by its edges and avoid touching circuits; wear an anti-static wrist strap if available.
- Verify connector orientation and seat all wiring harnesses firmly; check harness routing before reassembly.
This part fixes the following symptoms
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
Dishwasher bosch went to 1 minute and would not turn off or drain Mike B. • Fayetteville , AR • November 30, 2015
Had to put new control board, fixed the problem
Read more
More
$210.69
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10737607
Fix dishwashers showing error codes, not starting, or running erratic cycles with this electronic control board. Restores responsive controls and reliable operation.
More
$181.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10473197
Fix a dishwasher that won't start, stops mid-cycle, or won't drain. This electronic control board manages cycles and powers components. DIY repair.
Do-It-Yourself Stories from Customers like You
Dishwasher would start cycle then switch to drain. It did this in all settings start and stop in a few seconds. Judy N. • Umpqua , OR • February 03, 2018
My husband and I were in a pickle, the dishwasher was on strike and we knew that hiring someone to fix it would probably cost the same as buying a new one. So we decided to DIY. Our dishwasher is a Jenn Air. We googled DIY how to fix online, we had an idea what parts we needed to replace. In our research and price comparison we found Appliance Parts Pros. They had good reviews and were one of the best for prices. We ordered the touch pad control panel and the electronic control board. ...
Read more
More
$175.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10597042
This Electronic Control Board is the appliance's central control module. It interprets inputs from sensors and switches and directs power to motors, valves, heaters, and fans to run cycles reliably when the original board has failed.
- Manages overall operation by processing signals and executing programmed cycles
- Sends power/commands to components such as motors, pumps, fans, heaters, and valves
- Typical symptoms of a failed board: no power or won't start, unresponsive controls, cycles that won't advance, intermittent shutdowns, or error codes
- Useful when diagnostics point to control failure after ruling out fuses, switches, sensors, and wiring
What's included: 1 electronic control board Install notes:
- Disconnect power before servicing; turn off water supply if applicable
- Use ESD protection and handle the board by its edges
- Photograph/label all connectors; move harnesses one at a time and transfer any jumpers/settings from the old board if present
- Mount securely, reconnect wiring, reassemble, then run the unit's diagnostic/self-test per the service manual
Do-It-Yourself Stories from Customers like You
Dishwasher wasn't drying or heating water Berit A. • Stafford , VA • November 27, 2015
After removing and testing the continuity for the heating element, then the thermostat, I wasn't sure what to check next. I chatted online, and Susan suggested the control board was the most likely problem. I'm only somewhat handy, so I was nervous when the part didn't arrive with instructions. All I needed was a screwdriver to removed the front panel of the dishwasher (and to lift the tabs on the plastic housing of the control board), and it's clearly labelled as to where to plug in each wire...
Read more
More
$103.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10473200
Fix a dishwasher that won't cycle, stays in wash mode, or has unresponsive controls. This control board manages timing and operation. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Whirlpool dishwasher stopped working during wash cycle and front panel lights started flashing Vito S. • Denville , NJ • January 31, 2022
After determining the door lock mechanism was working properly, I replaced the control board.
Read more
More
$175.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304480722
This is an electronic display control board for a dishwasher, and it includes mounting screws. It manages the user interface display and communicates cycle selections to the main control board. Replace this board if the display is blank, unresponsive, shows error codes, or if buttons no longer register when pressed.
Do-It-Yourself Stories from Customers like You
Er Benigno C. • Lakewood , CO • November 24, 2020
Bought a new control board and keyboard... I suggest buying the keyboard as well mine was hard-wired together so I would have had to order the keyboard and wait had I not ordered it with the control board... easy to change, had it running in no time
Read more
More
$94.37
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 154858101
Fix a dishwasher that stops mid-cycle with this control timer. Controls cycle progression and timing sequences. Moderate DIY difficulty.
More
$202.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 807024601
Dishwasher won't start wash cycle or advance through cycles? This electronic control board manages wash, drain, and dry functions. DIY repair.
Do-It-Yourself Stories from Customers like You
Dishwasher not drying dishes properly Duwaun D. • Chesterfield , MI • October 06, 2018
Ordered 3 parts dealing with heating and drying dishes. Thermostat and heating coil were ordered and installed separately but did not fix the problem. The final control panel repair fixed the problem. Videos explaining how to install the parts were great. Something that would be very helpful would be to include in the videos how to test each part with a voltmeter to ensure it was good before purchasing the part. I found this information elsewhere after I had needlessly ordered two parts...
Read more
More
$224.77
Out Of Stock
Usually ships within 4 - 14 days
Genuine Lg part
By: Lg
Part Number: EBR43245901
Fix unresponsive buttons or no display on your dishwasher. This control board restores display illumination and button function. 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Several buttons did not work. Matthew B. • Dallas , OR • May 02, 2019
Replaced the display PCB. Took about 15 minutes total, and fixed the problem.
Read more
More
$147.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10597045
This electronic control board is the main console controller that manages a range of appliance functions and restores responsive controls and displays. Replace a failing board to get timed cycles, settings and display feedback working again. What it does:
- Controls user interface, display and timed cycle logic for the appliance
- Sends signals to heating/motor components to start and stop operations
- Responds to touchpad or button inputs so selected settings run correctly
- Common symptom fixer: no display, unresponsive controls, or erratic cycle behavior
- Works with existing harnesses and sensors when compatible
What's included:
- One electronic control board
Install notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Handle the board by the edges and avoid touching circuitry to prevent static damage
- Reconnect all wire harnesses in their original positions; loose connections can cause faults
Do-It-Yourself Stories from Customers like You
Wouldn't advance from wash cycle Chase M. • Pocatello , ID • April 19, 2020
New controller installed.
Read more
More
$102.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD21X10078
Dishwasher won't advance cycles or timer sticks at end of wash? This control timer restores proper cycle progression and automatic shutoff.
More
$79.95
Out Of Stock
Usually ships within 4 - 14 days