Dryer Drum Support Roller Parts
Genuine Bosch part
By: Bosch
Part Number: 00422200
Drum support roller wheel for Bosch dryers. Mounts on axle shafts to stabilize and support the rotating drum. Replace when cracked, worn, or squeaking.
Do-It-Yourself Stories from Customers like You
Squeaking in unison with drum rotation. David F. • Sagamore Hills , OH • December 21, 2017
Replaced front drum roller wheels and rear drum bearing.Pull plug.
Remove 2 screws holding top panel,slide rearward and lift panel off.
Remove all screws from back panel,wiring cover and cord clamp.
Remove back panel and feed cord through hole.No need to remove cord.
Remove 2 screws from heater box and let it drop rearward.Remove belt from
motor pulley and let tensioner rest against motor pulley.This step will trigger the
switch that disables motor if belt breaks.The switch does not reset...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP31001344
Replacement idler pulley that maintains tension on the drive belt. Install when the original is worn, cracked, or seized, causing belt slippage or noise.
Do-It-Yourself Stories from Customers like You
Crazy squealing noise while dryer was spinning took drum out and the roller and shaft was worn on the left side while i had it apart i noticed a crack in the pulley idler William H. • Buffalo , NY • December 27, 2014
Decided to order the kit with both rollers even thou the right one looked OK.Also ordered the pulley for the idler. Watched the video for the pulley installation,super helpful on a couple of the steps!! Everything went great. A 14 year old dryer still has life! Parts ordering and delivery was also great!!! Thank you.
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DC97-16782E
Supports and allows the dryer drum to rotate smoothly. Replace if worn, cracked, or causing excess noise. Installs on the rear drum support frame.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-2287
Spring-loaded belt tensioner that keeps the drive belt properly tightened. Replace if worn, seized, cracked, or causing squealing to restore smooth operation.
Do-It-Yourself Stories from Customers like You
The front drum slides rear wheels where both wore out also needed a new filter screen Bryan B. • Ville Platte , LA • March 05, 2016
Un plugged dryer. It was an easy fix, popped the top up. Removed the two screw that held the front on and also unclipped the door switch. Released tension that was on belt and removed drum. Removed old front slides cleaned up area and replaced them. Popped the ring that held the rear drum wheels and placed the new ones with a dab of grease. Un hooked tension spring for idler and removed old one and put the new one in. Make sure you place it through the correct hole and it makes it firmly into...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10177428
Replacement drum support roller for dryers. Mounts on the axle to support the drum and enable smooth rotation. Replace if worn, cracked, or noisy.
Do-It-Yourself Stories from Customers like You
Making noises when operation Kenneth S. • Manning , SC • March 18, 2016
Had to replace the drum rollers, idler roller and belt. Machine has never been taken apart so it was a learning event as well as cleaning all the internals components. Parts that were purchased fit fine, no problem with figment. More time was spent oncleaning and prepping the machine for the new parts
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: D510266P
This front bulkhead assembly forms the dryer's front drum support and air seal. Replacing a worn or damaged bulkhead restores smooth drum rotation, reduces noise, and helps maintain proper airflow for consistent drying performance.
- Supports and aligns the drum at the front to prevent rubbing and scraping
- Helps seal the lint/air path so heat stays in the drum and exhaust flows correctly
- Air leaks at the front bulkhead can contribute to long dry times or lint in the cabinet
What's included: 1 front bulkhead assembly Install notes:
- Disconnect power and gas supply and allow the dryer to cool before servicing
- Remove the front panel/door assembly; support the drum before detaching the old bulkhead
- Transfer any model-specific components from the original bulkhead and ensure seals/glides are correctly positioned
- After installation, rotate the drum by hand to verify clearances, then reassemble and test
More
Genuine Speed Queen part
By: Speed Queen
Part Number: 56461P
Threaded metal shaft that mounts the idler roller in dryers and washer-dryer combos. Replace if bent, worn, or stripped threads prevent secure roller installation.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 807787702
This is a single drum support roller that helps the dryer drum rotate smoothly during operation. The roller sits on a shaft at the rear or front of the drum and bears the weight of the drum as it spins. Replace this roller if the dryer makes a loud thumping, squealing, or rumbling noise during operation, or if the drum does not turn freely.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134693800
Replacement pulley that guides the drive belt in your dryer. Needed when the original pulley is worn, seized, cracked, or causing belt damage.
More
Genuine Ge part
By: Ge
Part Number: WE21X26838
Supports the dryer drum and allows smooth rotation. Replace if cracked, worn flat, or causing the drum to wobble. Installs on the axle at rear or front.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11178667
This bulkhead is the front tub housing that supports the washer drum and seals the washer cabinet to help contain water. Replaces a cracked or corroded housing to restore proper drum alignment and help prevent leaks. What it does:
- Provides structural support for the washer tub and drum assembly
- Forms the front seal surface to help keep water inside the washer
- Helps maintain correct drum alignment to reduce noise and wobble
- A failing bulkhead can cause visible leaks, excessive vibration, or rubbing noises
What's included: One bulkhead housing Install notes:
- Disconnect power and water supply before starting any repair
- Inspect surrounding seals, gaskets, and mounting hardware when replacing the bulkhead
- Replacement may require partial disassembly of the washer cabinet and drum; follow OEM instructions
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10541657
This is the main drum assembly for a dryer, the large cylindrical chamber where clothes tumble during the drying cycle. It rotates to circulate garments through heated air for even drying. Replace this drum if it has developed cracks, dents, worn spots that snag clothing, or if the interior coating is peeling or damaged.
Do-It-Yourself Stories from Customers like You
Whirlpool duet dryer making banging noise when running Robert B. • Centereach , NY • June 01, 2014
I opened the top of the dryer and found the seam had broken as well as the tub was cracked. This unit is only three years old. I tried first by grinding the seam down a little but to no avail. I ordered the drum from applianceparrtspros,.com and within two days had the part delivered to my front door. i found a video on the exact repai on you tube and one hour later had a quiet running dryer. Thnaks appliancepartspros.com
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10545924
Replacement dryer drum front bulkhead panel. Installs at the front of the drum assembly. Needed when cracked, warped, or damaged from wear.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10828911
This front bulkhead is the large panel that forms the front wall of the dryer drum compartment and supports the drum as it rotates. It typically includes the opening where clothes are loaded and may include a felt seal to prevent air leaks. Replace this bulkhead if it is warped, cracked, or if the drum seal surface is damaged - symptoms include unusual noises, clothes getting caught between the drum and panel, or heat escaping from the front of the dryer.
More
Genuine Bosch part
By: Bosch
Part Number: 00600436
Tension roller for dryers. Mounts to the support bracket to maintain proper belt tension around the drum. Replace if worn, squeaking, or damaged.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11178668
The Bulkhead is an OEM component for Whirlpool dryers. As a structural panel, it secures the rear of the appliance while enabling airflow behind sliding doors.
Formed from durable composite, the lightweight bulkhead installs easily into precise slotted tracks inside the chassis. This allows full retraction during maintenance without removing additional panels.
Causes of a faulty bulkhead can include cracked welds or screws stripping their anchors from extreme force vibration over many years of use.
Causes of a bad bulkhead can include:
- Noisy rattling and resonance as the dryer operates
- Restricted door movement from misalignment
- Inability to fully access internal components
- Excessive ducting leaks from gasket compression failure
Replace yours with this genuine Whirlpool bulkhead to restore smooth, tight operation. Compatible with Kenmore, Maytag, and KitchenAid dryers.
More