Refrigerator Cap Handle Parts

The Ice Bucket Dispenser Cover is an OEM part for GE refrigerators. It acts as a shield for the ice bucket, maintaining the insulation around the ice and ensuring the ice remains frozen while preventing freezer burn. 

Causes of a bad ice bucket dispenser cover can include physical damage from handling or excessive frost buildup, which can warp or crack the plastic. 

Symptoms of a bad Ice Bucket Dispenser Cover include:

• Increased ice melting or clumping
• Frost or ice accumulation in inappropriate areas of the freezer
• Visible damage to the cover, such as cracks or warping

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This handle is Black. For white order WP2206934W and for graphite order WP2206934J.

Color: white

The Water Filter Cap is an OEM replacement part for Whirlpool refrigerators. This component is a decorative cover that fits over the water filter, providing a neat and finished appearance to the filter housing area.

Color: Grey

Over time, the water filter cap can become damaged due to accidental impact, routine handling, or regular wear and tear. 

Symptoms of a faulty water filter cap include:

• Difficulty in securely fitting the cap onto the water filter
• Cracks, discoloration, or missing pieces
• An unsightly internal refrigerator appearance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replace a worn or broken fresh food door handle with this color-matched bisque handle to restore a solid, comfortable grip and clean appearance on your refrigerator's main compartment door.

• Provides the handhold to open and close the fresh food door
• Worn, loose, cracked, or missing handle can make the door hard to open and detract from appearance
• Color: Bisque, for models that use a bisque fresh food handle
• Restores proper feel and operation when opening the refrigerator section

• Unplug the appliance or disconnect power before servicing
• Open the door to access handle screws; support the handle as you remove fasteners
• Transfer any end caps or mounting screws from the old handle if your model reuses them
• Tighten all screws securely and check for firm, wobble-free fit

The Refrigerator Center Cap for French Door Models is an essential component for maintaining the appearance and functionality of your Samsung refrigerator. This genuine OEM part is specifically designed to fit seamlessly with Samsung French door refrigerator models, ensuring a perfect match and reliable performance. Crafted from high-quality materials, the center cap provides durable protection for the internal components of your appliance, safeguarding them against dust and debris. Its precise design allows for easy installation, making it a hassle-free replacement that restores your refrigeratorGÇÖs original look and functionality. By choosing this genuine OEM part, you can trust that you are getting a product that meets SamsungGÇÖs exact standards, which helps prolong the life of your refrigerator and maintain its efficiency. Whether your original center cap is damaged, worn, or missing, this replacement part offers a straightforward solution to keep your fridge looking sleek and operating smoothly. Enhance your refrigeratorGÇÖs performance and appearance with the reliable and well-fitting Refrigerator Center Cap for French Door Models .

The Handle Set is an OEM part for Frigidaire refrigerators. It includes the necessary handles for the refrigerator and freezer doors, providing a secure and ergonomic grip for opening and closing the doors. 

Causes of a bad handle set can include regular wear and tear, accidental impacts, or damage from overloading the doors.  

Symptoms of a bad handle set include:

• Loose or wobbly handles
• Visible cracks or breaks
• Difficulty in opening or closing the doors
• Handles not aligning properly with the door

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Freezer Door Handle Assembly is an OEM part for GE refrigerators. It provides a sturdy grip for opening and closing the freezer door, ensuring easy access to the freezer compartment. This handle is designed to fit securely on the door, enhancing both functionality and the overall appearance of the appliance.

Causes of a bad door handle assembly can include regular wear and tear, accidental impacts, or improper installation. Over time, these factors can lead to the handle becoming loose, cracked, or broken, making it difficult to open or close the freezer door properly.

Symptoms of a bad freezer door handle assembly include:

• Loose or wobbly handle
• Visible cracks or damage
• Difficulty in opening or closing the freezer door
• The handle detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Refrigerator Air Filter Cover is an OEM replacement part for LG refrigerators. It provides a protective casing for the refrigerator's air filter. The air filter cover makes filter replacement easy while allowing uniform airflow distribution for optimal cooling and freshness. 

Causes of a bad air filter cover can include cracks or breaks from normal use over time. Screws or securing mechanisms may also become loose.

Symptoms of a bad air filter cover include:

• Cool air escaping without circulating properly
• Inability to easily access the air filter for replacement  
• Excessive refrigeration coil or evaporator fan noise

This OEM LG part is also compatible with Sears/Kenmore models. 

This acoustic fiber is the sound-absorbing insulation used in a refrigerator's machine compartment. Replacing a missing or damaged pad reduces operating noise from the compressor area and helps maintain the unit's intended sound levels.

• Absorbs and dampens compressor and condenser fan noise from the rear machine compartment
• Helps reduce vibration resonance transmitted through the cabinet
• Restores sound control when original insulation is torn, saturated, or missing
• Common symptoms: increased humming, buzzing, or rattling from the back or bottom of the refrigerator

• Disconnect power and pull the refrigerator forward for rear access
• Remove the lower rear access panel and note the insulation's placement/orientation
• Position the new pad in the same location; keep clear of coils, wiring, airflow paths, and moving parts
• Reinstall the access panel and restore power; verify no contact or obstruction

Replace a cracked or loose door handle with this factory-fit handle for select dishwashers. It restores a secure grip for opening and closing the door and refreshes the front appearance.

• Provides the handhold needed to open and close the dishwasher door
• Direct replacement for a broken, cracked, loose, or missing handle
• Helps correct a wobbly or unstable grip point on the door
• Refreshes the look of the appliance front panel

• Disconnect power at the breaker before servicing the door
• Open the door and access the handle's mounting screws from the inside; support the handle while removing hardware
• Transfer and reuse existing screws or end caps if your model uses them
• Tighten evenly; check door operation before restoring power

This freezer door handle assembly replaces a damaged or loose handle and restores a secure, comfortable grip. Finished in bisque to match your appliance, it refreshes appearance and helps the door open and close as intended.

• Provides the exterior grip for opening and closing the freezer door
• Attaches to the door's factory mounting posts/brackets and secures with screws or set screws (varies by model)
• Restores original look with a matching bisque finish
• Common symptoms: cracked, broken, or missing handle; handle feels loose or will not stay tight

• Wear gloves and keep the door closed for stability during replacement
• If present, remove trim caps; loosen set screws or mounting hardware and lift off the old handle
• Position the new handle on the mounting posts/brackets; tighten hardware until snug; reinstall caps
• Do not overtighten; verify the handle is aligned and secure before use

The Stainless Steel Freezer Handle is an OEM component specifically designed for GE refrigerators. As a primary interaction point, the freezer handle provides an aesthetically pleasing way to access the bottom compartment.

Causes of a bad freezer handle can include normal wear and tear over years of repeated opening and closing use. Exposure to moisture or accidental impacts may also damage plastic or metal components.

Symptoms of a bad freezer handle include:

• Difficulty opening or closing the freezer door  
• Looseness, wobble, or excess play in the handle mechanism
• Cracking, breaking, or other visible damage to plastic parts
• Protruding sharp edges or rust developing on metal surfaces

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This refrigerator door handle restores a secure, comfortable grip so you can open and close the door with confidence. Replace a cracked or loose handle to refresh your appliance's look and keep everyday use hassle-free.

• Provides the handhold used to open and close the refrigerator or freezer door
• Replaces cracked, broken, or missing handles
• Helps correct a loose or wobbly handle
• Can make the door easier to open when the old handle is damaged
• Restores the appliance's original appearance

• Unplug the refrigerator before servicing and wear cut-resistant gloves.
• Protect the door finish; remove any trim caps or set screws (as applicable) and detach the old handle.
• Align the new handle on the mounting studs and tighten screws evenly; do not overtighten.
• Verify the handle is secure and the door opens, closes, and seals properly.

This cover assembly replaces a damaged or missing cover on your appliance, protecting internal components and restoring a clean, finished appearance. Use it when the original is cracked, loose, or no longer secures properly.

• Shields internal parts from debris, spills, and accidental contact
• Helps keep components enclosed and aligned for reliable operation
• Restores the appliance's finished look after damage or wear
• Common signs of failure: cracks, broken or missing tabs, discoloration, rattling, or a cover that won't stay in place

• Disconnect power before servicing; shut off water supply if working near water connections
• Remove retaining screws or release tabs; note the orientation of the original cover
• Transfer and reuse original screws, clips, or seals if required
• Do not overtighten fasteners into plastic; ensure all tabs fully engage before testing

This water line holder secures and routes the refrigerator's plastic water tube so it stays protected and out of the way. Replacing a damaged holder helps prevent kinks and leaks and keeps water flowing to the dispenser and icemaker.

• Anchors and guides the water tube along the cabinet/door to prevent rubbing and kinking
• Helps maintain proper water flow to the dispenser and ice maker
• Replace if the holder is cracked, missing, or the tube won't stay seated
• Symptoms can include leaks or drips near the hinge/backs, slow or no dispensing, or visibly loose tubing

• Disconnect power and turn off the household water supply before servicing
• Access the holder (often behind a hinge cover, kick plate, or rear panel)
• Note tube routing, then release/remove the old holder and seat the tube in the new holder; reuse existing hardware if present
• Restore water and power; check for leaks and normal dispenser/ice operation