Washer Run Vent Push Button Switch Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304511344
The Switch is an OEM component specifically designed for Frigidaire washing machines. It controls various cycle options like water temperature levels, spin speeds, and additional settings like stain removal cycles.
Causes of a bad switch can include water or chemical damage leading to component failure over time, or loose wiring connections causing intermittent issues.
Symptoms of a bad switch include:
- Inability to select wash cycles or adjust settings
- Unresponsive or inaccurate temperature levels
- Lights/displays not functioning as normal
- Error codes indicating switch problems
This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Replace yours today to avoid expensive repairs down the road.
More
$61.56
- Compare At:
-
$73.87
- You Save:
-
$12.31
Genuine Whirlpool part
By: Whirlpool
Part Number: W11417623
Fix a washer that won't fill with water or overfills with this water level pressure switch. Controls proper water amounts for each wash cycle.
Do-It-Yourself Stories from Customers like You
Water wouldn't fill the basket Mike R. • Essington , PA • December 03, 2016
Replaced the faulty switch with the new part. Found out tge problem by doing a simple Google search!
Read more
More
$52.68
- Compare At:
-
$63.22
- You Save:
-
$10.54
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181881
Color: Blue. For gray order WP8181859.
Do-It-Yourself Stories from Customers like You
The control know on my duet washing machine was broken Kathi K. • Milton , DE • July 22, 2014
I purchased a replacement knob from AppliancePartsPros and replaced the broken knob. the ApplicanceParts website was terrific. I didn't need the washer model number to choose the proper knob because the illustration was perfect. After ordered, the knob arrived within a day. The time expended from ordering to repair was less than 15 minutes. Thanks so much.
Read more
More
$28.43
- Compare At:
-
$33.55
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3399640
Dryer won't heat or overheats on low settings? A faulty temperature selector switch prevents proper heat control. Easy DIY fix in 10-15 minutes.
Do-It-Yourself Stories from Customers like You
My kenmore dryer was not gnitind so therefore no heat also my washer was leaking under the machine Bill K. • Midland Park , NJ • November 24, 2014
THE WSHER WAS EASY BECAUSE THE DRAIN PUMP HAD TWO PENNIES INSIDE IT AND THEY CRACKED THE HOUSING.EASY FIX REPLACING THE DRAIN PUMP. WORKS LIKE A CHARM. DRYER WAS A BIT MORE WORK.I CHANGED THE IGNITER FIRST WITH YOUR ADVICE. STILL NOTHING. I THEN CHANGED THE COIL VALVE KIT. NO LUCK. NEXT WAS THE TEMP SWITCH ON THE PANEL. STILL NO GOOD.FINALLY THE THERMAL FUSE WAS RECOMMENDED. I WAS ABLE TO PURCHASE ONE LOCALLY AND IT WORKED . GREAT RELIEF.THANKS FOR ALL THE HELP AND RECOMMENDATIONS. YOUR...
Read more
More
$62.61
- Compare At:
-
$74.51
- You Save:
-
$11.90
Genuine Frigidaire part
By: Frigidaire
Part Number: 131858004
Color: white. Measures about 1-1/2 inches in diameter.
Do-It-Yourself Stories from Customers like You
Broken knob Dean P. • Superior , CO • April 27, 2015
This is an easy fix, but Appliance Parts Pros make finding the correct part easy. I looked at many sites to get a new knob, as I was tired of using pliers to start the dryer. The images on the grid are worth their weight in gold!
Read more
More
$58.26
- Compare At:
-
$69.33
- You Save:
-
$11.07
Genuine Whirlpool part
By: Whirlpool
Part Number: 279872
This fixed-value resistor is an electrical component used in select dryers to limit current in a specific control circuit. It helps the timer or electronic control operate correctly by dropping voltage to safe, design-intended levels.
- Provides precise resistance to reduce voltage/current in the designated dryer circuit
- Supports proper operation of the timer, control board, or end-of-cycle signal (varies by model)
- Failure may present as a timer that won't advance, an inoperative signal/buzzer, or irregular cycle behavior
- Replace if visibly burned/damaged or if testing shows an open or shorted condition
What's included: One resistor Install notes:
- Disconnect power to the appliance before servicing
- Access the console/wiring harness and note original wire routing
- Make secure, insulated connections and route the resistor/leads exactly as original to avoid heat or chafing
- After installation, run a test cycle to ensure proper operation of the affected function
Do-It-Yourself Stories from Customers like You
Timer wouldn't advance on my dryer John L. • Oblong , IL • March 22, 2016
I ordered a new timer and installed it with the help of the videos provided and this did not solve my problem so I chated with the pros @ Appliance Parts Pros and told them my problem and they told me the problem and recommended the part I needed and With the incredibly fast shipping I had the part the next day. I installed it and now my dryer timer works great.Thanks to APPs for their help and ease of ordering and fast shipping. I highly recommend AppliancePartPros and will definitely use...
Read more
More
$46.35
- Compare At:
-
$55.62
- You Save:
-
$9.27
Genuine Speed Queen part
By: Speed Queen
Part Number: 803118P
Replaces a worn, cracked, or broken timer knob assembly on your washer. Mounts on the timer shaft to restore secure grip and smooth cycle selection.
More
$8.95
- Compare At:
-
$10.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8182050
Front load washer control knob. Color: Pewter. For gray order WP8181859. For Biscuit order WP8182049. For blue order WP8181881.
Do-It-Yourself Stories from Customers like You
Broken knob Kevin M. • Ambler , PA • January 22, 2018
I replaced it.
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285512
Fix erratic or unresponsive cycle selections with this laundry center rotary encoder switch. Mounts behind the cycle knob to restore accurate settings.
Do-It-Yourself Stories from Customers like You
Temperature control switch failed to cold only. Marilyn M. • Summerfield , FL • September 30, 2017
Replaced with a new one.
Read more
More
$83.44
- Compare At:
-
$99.29
- You Save:
-
$15.85
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002749
This flume hose kit replaces the flexible hose that routes water from the dispenser/fill flume into the washer tub. Restoring a tight, unobstructed hose helps prevent leaks and ensures detergents, bleach, and softener are carried into the wash.
- Directs fill/dispenser water from the flume to the tub during wash and rinse
- Restores proper flow so dispenser compartments empty correctly
- Helps prevent leaks caused by splits, brittleness, or loose connections
- Typical symptoms: water on the floor, dispenser not draining, weak flow into tub, musty odor near dispenser
What's included: 1 flume hose Install notes:
- Disconnect power and shut off water supply before servicing
- Access the dispenser/flume area by removing the top or control panel per your model
- Note hose routing; transfer and secure clamps; avoid kinks and rub points
- Run a quick fill/rinse to check for leaks at both connections after installation
Do-It-Yourself Stories from Customers like You
Leaking water from high in back of unit; not tub or pump Greg W. • Austin , TX • April 29, 2015
I figured it had to be the flume; changed the flume and hose, mounting screws
Read more
More
$18.95
- Compare At:
-
$22.55
- You Save:
-
$3.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003410
Size: 90 inches long. To order hose extension use 12001585. To order siphon break use 76660.
Do-It-Yourself Stories from Customers like You
General overhaul of a 14 year old machine Todd F. • Wellsburg , WV • January 20, 2016
Model# MAV7257AWW Maytag Atlantis Washing Machine. Repairs were fairly easy along with the videos appliancepartspros offers on their website. Parts also came with instructions on how to install. Other videos were available on You Tube. The only part difficult to install was Thrust bearing kit - make sure when installing to pull down on shaft so washer and e-clip will fit. Another note, you can get a pulley for your replacement motor pulley on eBay and Maytag.com. Just pay close attention to...
Read more
More
$50.57
- Compare At:
-
$59.67
- You Save:
-
$9.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 131494800
Connects washer outer tub to drain pump, channeling water out during drain cycle. Replace if cracked, leaking, deteriorated, or damaged by pests.
Do-It-Yourself Stories from Customers like You
Leaky drain hose Rocco S. • Rochester , NY • February 24, 2017
Simply open the top of the washer by inserting a putty knife (watch YouTube ) and then the front panel by removing two bottom philips head screws on the front. The whole front panel comes right off. Using pliers the spring clams holding each hose, they come off and each hose is replaced. The drain one was only leaking but since it has open I changed both and even the drive belt. Whole job less than 1 hour. BTW parts arrived next day!
Read more
More
$70.31
- Compare At:
-
$83.67
- You Save:
-
$13.36
Genuine Whirlpool part
By: Whirlpool
Part Number: W10853910
This control knob attaches to the appliance's control shaft so you can select settings with a solid, positive feel. Replace a cracked, stripped, or missing knob to restore smooth operation and a clean, finished look.
- Attaches to a switch or valve shaft to select temperatures, burner levels, or cycles
- Transfers your hand turn to the control shaft for accurate setting changes
- Common symptoms: cracked hub, spins without engaging, wobbly/loose, falls off, or missing
- Helps maintain a uniform appearance across the control panel
What's included: 1 control knob Install notes:
- Disconnect power (and shut off gas, if applicable) before servicing
- Pull the old knob straight off the shaft; avoid prying against the control panel
- Align the insert with the shaft's flats or splines and press straight on until fully seated
- Match position- and finish-specific knobs to the original on models that use different knobs per location
Do-It-Yourself Stories from Customers like You
Knob on dryer had a lot of play in since purchased 6 months ago finally stopped working altogether Jil S. • Glen Allen , VA • November 19, 2023
Ordered a knob that was compatible. Worked great only it did not have a pointer telling you what setting you were on. This was solved by using a magic marker once we figured out where to put it.
Read more
More
$49.51
- Compare At:
-
$59.41
- You Save:
-
$9.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3957841
The Washer Timer Dial is an OEM replacement part for Whirlpool washers. Positioned just behind the washer timer knob, the timer dial has a gray indicator that helps the user select the appropriate cycle. It interacts with the timer to ensure the washer operates in the correct mode and duration according to the chosen cycle.
Over time, the timer dial may degrade due to regular use, excessive force during cycle selection, or accidental impact. This can lead to inaccurate cycle selection, making it hard to use the washer efficiently.
Color: White
Symptoms of a faulty Washer Timer Dial include:
- Misalignment or sticking when choosing cycles
- Difficulty accurately selecting the desired cycle
- Cracked or broken indicator
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Knob and timer knob Charles B. • Sioux Falls , SD • October 01, 2018
Watched the video and completed repair as shown
Read more
More
$33.95
- Compare At:
-
$40.06
- You Save:
-
$6.11
Genuine Frigidaire part
By: Frigidaire
Part Number: 134889600
Carries wastewater from your washer's drain pump to the standpipe or sink. Replace if cracked, kinked, clogged, or leaking to restore proper drainage.
Do-It-Yourself Stories from Customers like You
Odor and mold Joel S. • Derry , NH • January 26, 2016
Our washing machine door boot seal was getting moldy and causing odor problems. Cleaning tablets and bleach weren't helping so it was time to be replaced. While I had the top and front off I changed all the hoses that could be collecting soap scum and mold, all other wetted parts were removed and washed. The video on the door boot seal, and inlet valve assembly were extremely helpful in understanding how these parts are removed and reassembled. Although the door boot seal is the most visible...
Read more
More
$60.95
- Compare At:
-
$72.53
- You Save:
-
$11.58
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10268911
Washer overfilling or underfilling? The water level pressure switch senses tub pressure to control fill cycles. DIY repair in 20 minutes or less.
Do-It-Yourself Stories from Customers like You
My washer was overfilling Steve T. • Warwick , NY • January 25, 2016
Called appliance parts and asked, what was the fix. Told it was fill switch and that I could order it.
I was amazed that I received the part the next day without even asking for overnight delivery. I installed the part in less then 20 min. Problem fixed..
Read more
More
$111.44
- Compare At:
-
$133.73
- You Save:
-
$22.29