Washer Timer Control Knob Parts

This knob assembly replaces a worn or broken control knob so you can reliably set and adjust appliance settings. It restores a secure, easy-to-turn interface for the appliance's control shaft. What it does:

• Fits onto the control shaft to allow manual selection of settings and temperatures.
• Replaces cracked, stripped, or loose knobs that no longer grip the control shaft.
• Helps resolve issues where the control won't turn smoothly or slips while changing settings.
• Restores tactile feedback for accurate user control.

• Disconnect power to the appliance before removing or installing the knob.
• Pull the old knob straight off the control shaft.
• Align the knob's internal splines with the control shaft and push until fully seated.
• If knob does not seat or control still slips, inspect shaft splines and replace damaged components as needed.

This control knob replaces a worn, cracked, or missing range/stove dial so you can select heat and settings with a secure grip and clear position indicator. It restores normal operation of the control shaft. What it does:

• Fits onto the control shaft to turn the burner/oven setting and indicate the selected position.
• Restores a solid grip and visible pointer for precise adjustments.
• Common symptom fix: knob is loose, stripped, cracked, or missing and won't turn or hold a setting.
• Helps avoid accidental setting changes from a damaged or worn knob.

• Disconnect power to the appliance before service to avoid shocks or accidental heating.
• Pull the old knob straight off the control shaft; line up splines and push the new knob onto the shaft until fully seated.
• Do not force or hammer the knob onto the shaft; if it does not seat easily, verify spline alignment.
• If the control stem or switch is damaged, replace the stem/switch assembly rather than forcing a knob.

Fix a washer that won't start, fill, or advance cycles with this control board. Controls all washing machine functions and cycle settings.

Washer won't start or stops mid-cycle? Flashing lights or unresponsive controls? This control board assembly restores function. 10-minute DIY repair.

Washer won't advance through cycles or timer dial doesn't respond? This mechanical timer restores timed operation and reliable cycle progression.

The Control Knob is an OEM part for Whirlpool washers and dryers. It attaches to the selector switch, enabling users to choose various settings such as wash or drying temperature, fabric type, and spin speed.

The most common causes of a defective control knob include internal stripping that prevents secure engagement with the selector shaft, wear and tear from frequent use, accidental impacts leading to cracks or breakage, and aging of the knob's material.

Color: White

Symptoms of a malfunctioning control knob include:

• Difficulty selecting or changing cycle settings
• The knob spins freely without engaging the selector switch
• Cracks, looseness, or broken parts

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washers and dryers.

Fix washer display issues, water level problems, or cycle failures with this electronic control board. Manages wash cycles and system functions.

Replaces a worn, cracked, or missing washer control knob. Snaps onto the control shaft to restore temperature or function selection capability.

This mechanical timer controls the sequence and duration of wash, rinse, and spin cycles in a front load washing machine. It sends electrical signals to the various components - such as the motor, water valve, and drain pump - at the correct times during the cycle. Replace the timer if the washer gets stuck on one cycle, skips cycles, or fails to advance through the wash program.

Replacement control knob for washer control panel. Restores grip and pointer for cycle selection. Needed when original knob is cracked, broken, or missing.

This replacement control knob restores a damaged or missing stove or oven control so you can set burner and temperature controls easily. It's a simple, visible part that makes operating your range safe and intuitive. What it does:

• Replaces a cracked, stripped, faded, or missing control knob for burners or oven controls
• Provides a clear grip and pointer for selecting heat levels and settings
• Restores proper knob engagement so controls turn smoothly without slipping
• Helps prevent accidental changes by fitting securely on the control shaft

• One replacement control knob

• Push the knob straight onto the control shaft until fully seated; no special tools required for most installs
• Turn off power (or gas for gas ranges) and allow surfaces to cool before servicing
• Confirm knob alignment with the control indicator before use
• If the control stem is damaged or the knob does not seat securely, stop and inspect the switch/shaft for wear or damage

This push button is the user-facing control button that completes a control circuit when pressed, restoring responsiveness to a worn or broken selector interface. It provides a direct, replaceable way to fix unresponsive or stuck control input. What it does

• Acts as the external control button that engages the appliance's internal switch when pressed
• Restores tactile feedback and reliable control input if the original button is cracked, loose, or missing
• Common symptom fix: buttons that stick, don't depress fully, or fail to activate functions
• Works with the matched internal switch assembly to ensure consistent operation

• Disconnect power before any service
• Remove the control panel or bezel as needed to access the button; avoid prying on surrounding trim
• Replace the button by aligning and snapping it into the button housing; do not force or bend retaining tabs
• If the button does not restore function, inspect the underlying switch/mechanism for damage before ordering additional parts

White control knob assembly for washers. Replaces cracked, stripped, or missing knobs. Restores cycle selection and control panel functionality.

Fix a washer that won't start, has no display, or won't respond to buttons with this control board assembly. Houses cycle selector and display panel.

Fix a washer that won't spin, stops mid-cycle, or shows error codes E43/E47/E62. This main control board restores cycle selection and timing functions.

Fix error codes, blank displays, or cycle problems with this washer electronic control board. Restores proper operation when buttons don't respond.